Although it's not said, to install the Demco Tabless Base Plate Kit # DM77YV there may be some trimming of spoiler, air dam, grille or plastic fascia required depending on the model of this vehicle.
To complete your flat towing setup, you're going to need:
-A tow bar - etrailer SD Non-Binding Tow Bar # e34ZR,
-A braking system - Blue Ox Patriot Radio Frequency, Portable Braking System # BLU37TR with the Roadmaster Brake-Lite Relay Kit for Towed Vehicles # RM-88400,
And a Roadmaster... view full answer...
When it comes to The Thule Windbar Evo bars The Thule Load Bar Adapter for Peloton and Echelon Bike Racks # THXADAPT9 will work and allows you to mount your Thule Roof-mounted bike carrier Pelotron or Echelon to your Windbar bars.
I attached a review video link below. view full answer...
Adding an additional 4-way to your 2022 Ford Maverick Hybrid will be easy with the Tekonsha T-One Vehicle Wiring Harness # TK53VR. This will install using the connection points behind the tail lights and a hot lead to your battery giving you a separate 4-way to power your LED tailgate lights. Tekonsha is the most reliable when it comes to wiring so this is the best way to go. view full answer...
Congrats on the new car. I can definitely help set you up with everything you need. Lets start with the base plate and work our way from there.
For the 2023 Maverick I recommend using the Roadmaster direct connect # RM97RR. Roadmaster make a great quality base plate, and the twist lock removable arms are a nice feature. That way you do not have metal pieces protruding from the front of the car when not in use. This base plate also has pre welded safety chain hooks, and a mounting location... view full answer...
We have the perfect trailer wiring harness that is confirmed to fit your 2022 Ford Maverick!
The T-One Vehicle Wiring Harness # TK53VR will provide you with a 4-flat connector and make it to where your trailer's stop, turn, and taillights will mirror your vehicle's stop, turn, and taillights. This connector will plug into your vehicle's wiring harness, which is located behind the tail lights on both the driver's side and passenger's side. You will need to remove the trail lights to access... view full answer...
Different vehicles "react" different ways when being flat towed and according to my research your 2023 Ford Maverick will naturally drain the battery during flat towing so you need install the Battery Charge Line Kit # RM-156-25 to get some 12V power from your motorhome battery to the battery on your Maverick and keep it from dying, especially with the Patriot brake system pulling power from your battery as well. This will be the battery under the passenger set on your Hybrid.
If your... view full answer...
The Demco SBS Wireless Coachlink # SM99945 which comes with the Demco Stay-IN-Play DUO Supplemental Braking System # DM86VR has a range of roughly 1/2 a mile without obstructions. While having the walls in your camper does restrict the range we have never encountered any issues even when connecting on motorhomes well over 40' long.
For your 2023 Ford Maverick I recommend using the Roadmaster Direct-Connect Base Plate # RM97RR with the Roadmaster Nighthawk All Terrain, Non-Binding Tow... view full answer...
While there isn't a all encompassing kit available for your 2022 Ford Maverick, we do carry all the parts you'd need and I'd be happy to get them for you.
First you're going to need a base plate # RM97RR, to be able to connect your 2022 Ford Maverick to your 2022 Four Winds Class C MH.
Next, you're going to need a set of tow bars # RM-676 to connect to your base plate on your Maverick.
Continuing, you're going to need a braking system # RM-8700 with a brake-lite relay # RM-88400. A braking... view full answer...
It does not appear your 2022 Ford Maverick has a plug for a aftermarket trailer brake controller. It will depend on what type of trailer connector if any your Maverick will have from the factory.
If you do not have any trailer connector the T-One Vehicle Wiring Harness # TK53VR is where you need to start. This will connect to the Universal Install Kit # ETBC7 which would also connect to a factory 4-way flat connector if that is what you have. This kit provides all the wiring needed to... view full answer...
I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA92-00-0450 for your Look Brand Snowmobile trailer. I like this weight distribution hitch because it has integrated 2-point sway control that will limit the side to side movement. It also has no lift chains that will eliminate unwanted movement. The weight distribution hitch has a tongue weight up to 450 pounds and has a gross towing weight up to 4,500 pounds putting your trailer right in the perfect spot for this... view full answer...
Yes, the Replacement Control Module for Lippert Ground Control 3.0 Leveling System # LC85ED will work as a replacement, however according to Lippert you need to have the Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System # LC421484 otherwise you'd need to upgrade this as well. view full answer...
To add a brake controller to your 2023 Ford Maverick I recommend installing the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # TK95VR to get the wiring and then the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness # RED63RR for the brake controller end of things.
The Tekonsha wiring kit gets you all of the functions you need for your trailer functions and then the Tow-Pro Elite controller can be installed virtually anywhere in your truck cab and... view full answer...
First of all you will need the Roadmaster Direct-Connect Base Plate Kit 524470-5 # RM97RR for your 2024 Ford Maverick. The item # RM39FR you found is Roadmaster part number 524465-5 which fits certain Ford Escapes. Do understand the baseplate above does not use a crossbar. If you have a set of tow bars like the Sterling # RM-576 it requires a Crossbar # 910021-00 and you would use the Base Plate # RM37RR.
For the electrical/lighting you will need the Wiring Kit # RM-154 and the 6-Pin... view full answer...
Thank you for all of the information! Since you're wanting to use your older Thule square crossbars you will need to use the Inno legs and fit kit as Thule updated their roof rack system a few years ago and their newer legs don't work with the older square bars. The Inno square bars have the same dimensions as the older Thule bars though which is why their kits are compatible.
As of right now (January 2022) the only roof rack fit listed that fits this criteria is for the 2022 Ford Maverick.... view full answer...
We do sell just a single bar # RRVA137B that you could use, however the fit kit and the towers required to actually install onto your vehicle are only available in the complete set.
So if you really wanted just one bar, you could use # RRVA137B with the complete fit kit # DK228 & # RRRLKVA and just use half of each kit. view full answer...
Go To Results