Solution for Replacement Thermostat on Older Fan-Tastic Vent Roof Vent

Question

Question:

Need a thermostat for an older Fantastic fan. Part number is: 275-2918-00

asked by: Dale P

0

Expert Reply:

According to my contact at Dometic, that thermostat is no longer available as a replacement part. Unfortunately, this means the only solution is to replace the entire fan.

I recommend the Fan-Tastic Vent Roof Vent # FV803350. This has 3 manual speeds, a rain sensor, powered arm, and a thermostat. If you would like to have a remote we also have the # FV807350. This has the same features as the other fan but adds the digital remote as well as 13 speeds.

expert reply by: Robin H

0

Answer 1

You will have to manually turn the fan of the Fan-Tastic Vent Roof Vent w/ 12V Fan #FV802250 off after closing the lid of the roof vent.

view full answer...

Answer 2

If the original fan was in fact a Fan-Tastic Vents 4000B then it was a pretty standard size, 12v RV vent fan. Since you do not want the remote feature, you can use the Fan-Tastic Vent Roof Vent w/ 12V Fan #FV802250. This vent fan will work to replace…

view full answer...

Answer 3

You will not need any extra parts to wire either the Dometic FanTastic Roof Vent #FV803350 or #FV807350 in place of your current fan. The MaxxFan Deluxe Roof Vent #MA00-07000K would be the route I would go thanks to its additional features. No matter…

view full answer...

Answer 4

Fan-Tastic vents do not have replacement circuit boards for their RV roof vents, and the FV6300 is no longer available, so the best we can offer is a new roof vent since yours is acting up. I recommend going with an option that does have available…

view full answer...

Answer 5

Thank you so much for the info and the pictures! According to my research it looks like your Cummins Onan RV Generator uses a 3/8" NPT Female fitting so you'll need a hose like part #100040-144-MBS. I have attached a link to all of our hose…

view full answer...

Answer 6

Hey Bruce, for a replacement Fan-Tastic brand RV roof vent I really like the part #FV803350 as it has a variable speed, reversible fan, a built in thermostat, power lid lift, and a rain sensor to auto close it in case it starts raining. The only…

view full answer...

Answer 7

You should be just fine replacing your two roof vents with the Fan-Tastic Vent Roof Vent #FV803350 since these fit the standard 14-1/4 x 14-1/4-inch RV roof opening size. Since you are replacing two 12V powered vents with two similar units your…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The model number B2000RBT that you mentioned is the motor model number for the Fan-Tastic Roof Vent. If the fan only runs for a few minutes it sounds more likely that the fan motor is going out. First, it is a good idea to make sure you are getting…

view full answer...

Answer 10

The correct replacement for your Klauber K01431B300 slide-out motor is the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model #LC157511.

view full answer...

Answer 11

That's great information - I appreciate it! The Gen-Y Executive needs at least 1,600 lbs tongue weight to be able to use the lightest option. When using a 5th wheel or gooseneck setup you want your tongue weight to be 20% of the weight of the…

view full answer...

Answer 12

The Rota-Flex Lockout Kit for Blue Ox 5th Wheel Hitches #BLU62XR is just a lockout kit to prevent the Rota-Flex head from pivoting, making it a standard pin box again so you shouldn't have a problem using it with your Andersen Hitch.

view full answer...

Solution for Replacement Thermostat on Older Fan-Tastic Vent Roof Vent

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching