The DeeMaxx Disc Brake Assembly # DE56YR that you referenced comes with ceramic brake pads. Not all of the yellow brake pads are Kevlar. We actually sell yellow and stainless steel backed ceramic brake pads from DeeMaxx. view full answer...
Hitch accessories end up being mostly secured horizontally in trailer hitches by the tongue weight of the accessory instead of by the hitch pin which is why hitch pin locks like the # e98881 are not not rated for shear strength. At some point it would fail, but in reality it would be at a weight that would be higher than your truck would be rated to tow. view full answer...
This a very common problem even on newer vehicles like yours. The solution is to either made a thread tap like you mentioned or get one from a hardware store to clean the threads out. You can also try wire brushes and other similar solutions but the thread tap gets it done the easiest and would be what I would recommend. view full answer...
I have a better option for you, but it's possible a 20" shock would work, but you may run into issues with it not closing all of the way.
You're better off going with an exact replacement which is the # ATL44BR which is an 18-1/2" gas shock. view full answer...
I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 for your 1984 Chevrolet K20 as this is a universal receiver you will be able to bolt/weld on your truck where you prefer it on the frame. You are able to cut the 44" wide cross tube to best fit where you want on the frame. All our custom fit receivers like the B&W # BWHDRH25122 are designed to fit with a factory bumper and will stick out past the truck. view full answer...
The # FRCBRKT-BL that you have on your camper indicates you have a Furrion Vision S system so you have a few options for monitors that will work with what you have.
-Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System # FR77FR
-Replacement 5" Monitor for Furrion Vision S Wireless RV Camera System # FR97FR
-Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System # FR47FR view full answer...
I do have an option for you but the Spare Tire Lock part FSTL0603 is not currently available. Instead, I recommend the Wheel Lock Set for 1/2" Wheel Bolts part # RG01-150 which you can use on both the spare wheel and in-use wheels. This is a more modern style of wheel lock and is used on most newer vehicles today. It also won't have an issue with the lock core seizing up which can happen for any lock like the above left outside if you don't do proper maintenance. view full answer...
I do have an option for you but unfortunately, this axle is no longer supported and we don't offer any hubs for it. Therefore, you can either replace the spindle or the axle altogether which is what I recommend as welding a new spindle on take extreme precision.
In order to choose the correct replacement axle for a trailer you'll first want to start with the weight capacity. The weight capacity can be found on the axle tag in the center of the beam. Then, you'll need to measure the hub... view full answer...
Due to the universal nature of the AirScreen XT for Thule Crossbars # TH82WV this would fit the bars you have on your Mercedes E320. view full answer...
The correct steering stabilizer for your 2020 Jayco Redhawk 26XD is the part # RM47MR. Then for a front sway bar you'd want the part # RM-1139-176.
Then for a rear sway bar use part # RM-1139-147. view full answer...
The Curt hitch part # 13703 would be the best option for your 2021 Forest River Cherokee Arctic Wolf 287BH as it fits the widest frame width range of 22 to 72 inches and fits all frame styles. It also has enough towing capacity for the trailer you mentioned as well. view full answer...
Since your e-bikes don't have top tubes the best solution for a bike rack would be a Thule Easy Fold XT part # TH903202 which has a clamp design designed for the lower frame tubes of e-bikes like yours and even comes with a ramp to make loading and unloading a bit easier. view full answer...
If your current wheel bolts have a taper to them that means they help center the wheel to the hub. If you went with a wheel bolt like the part # 7-23 the wheels wouldn't center onto the hub. You'd need something with a taper like the part # RG02-020 if you need a 60 degree taper or part # RG02-040 for a 90 degree taper. view full answer...
It sounds like you're looking for a remote mount transmission cooler. If that's the case we have some great options. The only hurdle to overcome is finding a place to mount it but so long as you have space there should not be too many issues. I recommend the Derale Hyper-Cool Remote Transmission Cooler Kit part # D13960 which measures 13" wide x 10" tall x 5-5/8" deep. view full answer...
The Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs # K71-359-00 you were looking at measures 5-3/4" center to center of the horizontal mounting holes, and includes new heavy duty 2-1/4" equalizers as shown in the included diagram.
Since it is the same size as the existing equalizer and shackle straps on your 2016 Eclipse Attitude 19FB this will be an exact replacement.
This kit is also designed for axles with 33" spacing which is exactly what... view full answer...
Yes just the light assemblies are available for the Trailer Taillight kit part # V944 that you referenced. For that you'd want the part # M844L for the left hand side and part # M844 for the right hand side. view full answer...
The listed length of a 2016 Dutchmen Kodiak Express 223RBSL is 25.3' long. This however includes the tongue which the cover is not designed to go over. The actual length of the trailer is around 23' as you mentioned. The Adco Polypropylene Storage Lot RV Cover for Travel Trailer part # 290-74842 has five layers which is the most we offer for this size. view full answer...
Yes, we have several options for this. You can either add on to the existing system you have, if that is an option. You will need to identify what system you have on the RV to know what options you have toward add on cameras as varying makes cannot be combined. Or, you can replace the existing system with a more complete option that has all the features you want. Something such as the Rear View Safety Backup Camera System with 4 Cameras and Quad View Monitor, # RVS-062710.
I have attached... view full answer...