Sway Bar and Steering Stabilizer for 2020 Jayco Redhawk 26XD

Question

Question:

I have a 2020 Jayco Redhawk 26XD on the Ford E450 cutaway chassis. I want to replace the front factory anti swaybar, steering stabilizer, and end links with roadmaster. I think I know which part numbers I need just want to make sure before I place the order. We are headed on a two week vacation to the beach in august and will be towing a f150. Just don’t want to fight the steering wheel for 6 hours. Thanx

asked by: Rick

0

Expert Reply:

The correct steering stabilizer for your 2020 Jayco Redhawk 26XD is the part # RM47MR. Then for a front sway bar you'd want the part # RM-1139-176.

Then for a rear sway bar use part # RM-1139-147.

expert reply by: Jameson C

0

Answer 1

You will need the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR for your 2020 Tiffin Wayfarer on a 2020 Ford E-450 class C chassis.

view full answer...

Answer 2

The install of the Roadmaster Exact Center Steering Stabilizer part #RM47MR does not require more than 150 ft lbs of torque. It's not a great idea to use a torque wrench as a breaker bar to loosen hardware. And I'm saying that as someone who…

view full answer...

Answer 3

We have the Roadmaster Exact Center Steering Stabilizer part #RM47MR that fits your 2021 Jayco Greyhawk 27U that has an OEM factory damper and would work really well to improve handling.

view full answer...

Answer 4

There is no video for a 2020 Thor Vegas 24.1; for your other question you said rear stabilizer so I'm not sure if you meant steering stabilizer or rear anti-sway bar, and there is drilling for the Roadmaster Rear Anti-Sway Bar #RM-1139-117, but…

view full answer...

Answer 5

In regards to steering and keeping the wheel centered, the Roadmaster Exact Center Steering Stabilizer part #RM47MR will work great for this on a 2022 Ford E-450 Chassis. The stabilizer is basically a spring that returns the wheel to center when not…

view full answer...

Answer 6

I checked with Roadmaster, and was able to confirm the fit of a steering stabilizer for your 2021 Jayco Greyhawk 27U Class C motorhome on a Ford E450 chassis. The correct fit is the following part number: - Roadmaster Exact Center Steering Stabilizer…

view full answer...

Answer 7

For a rear sway bar that fits your 2022 Entegra Odyssey 24B Ford 450 7.3 L V-8 you'd want the part #RM-1139-147 and for the front #RM-1139-176. Then for a steering stabilizer you'd want the part #RM47MR. Then to flat tow your 2005 Jeep…

view full answer...

Answer 8

Shocks and sway bars can cause a stiffer ride. Especially if you went with a sway bar setup designed for a heavier GVWR than what your RV has. With heavier sway bars you can make the handling drastically improved but if you go too heavy/thick the…

view full answer...

Answer 9

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 10

For driving and handling upgrades to a 2021 E350 Class-C, RV, I would recommend the following. Roadmaster #RM-RBK24-RSSC, Reflex Steering Stabilizer w/ mounting brackets. Compensates for over steering and returns your vehicle to center. Roadmaster…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...