Expert Answers about Dodge Charger

Trailer Hitch and Wiring Recommendation for 2010 Dodge Charger
Whenever there's a Class III hitch available for a vehicle like your 2010 Dodge Charger like the Draw Tite part # 76145 which is a confirmed fit it's the way to go. This would be your best option for towing a small trailer. For trailer wiring then the part # 118404 would be a great option that's also confirmed fit. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one...
view full answer...

Part Number of Dome Light Bulb on 2010 Dodge Charger SXT
On the Putco PURE Premium LED Dome-Light Kit, part # P980015, for your 2010 Dodge Charger SXT, it has 2 bulbs that fit in front map lights and 2 bulbs that fit in the dome lights. The 578 bulb part number is the factory part number I show for both the map light and the dome light on a 2010 Dodge Charger. The best way to verify the bulb size is check your owners manual or remove one of the bulbs from your vehicle and the part number will be stamped on the bulb.
view full answer...

Curt Hitch Recommendation for a 2011 Dodge Charger All Wheel Drive
Yes, the Curt Trailer Hitch # C13093 that you referenced is confirmed to fit all model 2011 Dodge Chargers so it will also fit your all wheel drive Charger. I attached installation instructions and an install video for this hitch for you to check out also. To complete your towing setup you may be interested in the following products: etrailer.com ball mount kit part # 989900 to provide ball mounts, hitch balls and pin and clips. Curt Trailer Wiring harness part # C56135 to provide the...
view full answer...

Trunk Mount Bike Carrier for a 2006 Dodge Charger with Rear Spoiler
For your 2006 Dodge Charger with rear spoiler I recommend the Thule OutWay Trunk Bike Rack # TH45JV. It was designed to work on vehicles that have spoilers. I have linked a video review of this rack for you. This is, by far, the easiest rack to install and it comes with one-keyed locks for both the rack and your bikes to deter theft. Check out the video of this rack. If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's bike...
view full answer...

Can Hitch Install on 2019 Dodge Charger Scat Pack with Rear Defuser
Looks like you might have to trim the backside of the defuser of your 2019 Dodge Charger Scat Pack but from the pictures of it only the hitch opening should fit right between the vertical bars on the defuser and otherwise fit fine.
view full answer...

Hitch Recommendation for a 2013 Dodge Charger SRT8
The Curt trailer hitch part # C13093 that you referenced has been confirmed to fit all models of the 2013 Dodge Charger so it would work well on your SRT8 model. Check out the install video I attached as well.
view full answer...

Best Hitch For 2017 Dodge Charger
All your options for your 2017 Dodge Charger are going to show pretty much the same amount of hitch receiver. I recommend the one that is going to look the sportiest. If I had a Dodge Charger I would put the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # C13236 because it looks somewhat like a wheelie bar racers put on high horsepower race cars! I've included a video to show you how to install it yourself. Check it out!
view full answer...

Trailer Hitch Recommendation for 2016 Dodge Charger SXT
Yes, we have trailer hitches that fit your 2016 Dodge Charger SXT. The Draw Tite hitch part # 76145 would be a great option confirmed as a fit. For trailer wiring you'd then want the part # 118655 which is a confirmed custom fit. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball,...
view full answer...

Trunk Mount Bike Carrier for a 2008 Dodge Charger with Rear Spoiler
The Hollywood Racks Over-The-Top, # HRF2 would work great on your Charger. It has a long reach as well as arms/legs that can move independently of each other for the best fit. This is the carrier recommended by Hollywood Racks for vehicles that have spoilers, including your Charger. If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's bike would) then I recommend using bike adapter bar # 64005. This will allow you to carry...
view full answer...

Roof Rack and Stand Up Paddleboard Carrier for 2014 Dodge Charger
For the roof rack, I'd recommend the Rhino-Rack Vortex Aero Roof Rack. The rack is reasonably priced, looks great and is very strong with a 165lb capacity (which could be limited by the actual capacity of your roof, see dealer or owner's manual for more information). The rack would consist of the following parts: Vortex Aero 49 Inch Crossbars, part # RRVA126B-2 Roof Rack Legs, part # RRRLKVA Vehicle Specific Clamp Kit, part # DK298 To carry your stand up paddleboard, there are several...
view full answer...

Wheelchair Carrier for a 2007 Dodge Charger
You'll need a few things for your 2007 Dodge Charger in order to carry a wheelchair safely. First, you'll need a Class III trailer hitch, which is available for your vehicle as part # 76145. This Draw-Tite Max Frame carrier provides a solid base for your vehicle to carry numerous hitch mounted accessories. I've included a link for all compatible ramped carriers for your Charger's new hitch, however wanted to recommend one in particular that will serve your needs. The Flint Hill Goods...
view full answer...

Will the Thule Passenger 2 Bike Rack Fit a 2010 Dodge Charger with Factory Spoiler
Generally speaking, if a vehicle has a rear spoiler you will not be able to mount a trunk mounted bike rack. However, if no part of the bike rack touches the spoiler and the straps can pass underneath or over the spoiler without touching it, then you can use a trunk mount bike rack. The Thule Passage 2 Bike Carrier # TH910XT is not recommended on the 2010 Dodge Charger because the bike rack is going to interfere with the factory spoiler on your Charger. Thule does offer a trunk mounted...
view full answer...

Will Thule Passage 2 Bike Rack # TH910XT Fit 2010 Dodge Charger with Factory Rear Spoiler
The Thule Passage 2 Bike Rack # TH910XT is a confirmed fit for your 2010 Dodge Charger with factory-installed rear spoiler. My contact at Thule verified for me that as long as your spoiler is not an aftermarket part, it will pose no compatibility issues with the Passage 2. For referenece I have linked a video showing use of this carrier on a 2012 Charger. If you like you can add a security strap to provide a degree of theft deterrence; Thule offers their # TH533 for this purpose. If you...
view full answer...

Ballmount Rise/Drop Needed for Towing Rental Car Dolly with 2015 Dodge Charger
The closer you can get the hitch ball height to the level height of the trailer (tow dolly in your case), the better. Towing the trailer nose up or down can cause trailer sway, which you'll want to avoid. For best results, you'll want to get the coupler and ball height within 1-1/2 to 2 inches, and it's better to have the coupler slightly lower than the trailer ball than vice versa. A ball mount with a 7-inch rise like # C45338 would put you right where you need to be, height wise. If...
view full answer...

Recommended Lightweight 2 Bike Rack for 2 inch Hitch Receiver
The lightest 2 bike rack we offer is the # TH9042PRO. This is a quality bike rack that weighs just under 20 lbs. Yes, you read that correctly. Because of its light weight, the rack will be very easy to install and remove. It offers tool free installation and is one of my favorites to use. It also includes locks to secure the bikes to the rack and the rack to the vehicle. I'll include a link to the demo video for you to have a look at.
view full answer...

Trunk Mount Bike Rack for a 2012 Dodge Charger SRT8 with Spoiler
As much as I like the Thule OutWay Bike Carriers including the # TH56BV, it is not the best option for your 2012 Dodge Charger SRT and that is due to the spoiler. I recommend the Hollywood Racks Expedition 3, # HR37FR. It may not be as pretty as the Raceway but it reaches over and around spoilers like Stretch Armstrong. It has long legs and arching arms to go up and over that spoiler. If you will be carrying any bikes that do not have a top frame bar that goes straight across (like...
view full answer...

Parts Needed to Tow With 2007 Dodge Charger SXT
You can tow with your 2007 Dodge Charger SXT, and according to the owner's manual I looked up online you can tow up to 2,000 lbs. I highly recommend checking your copy of the owner's manual to verify the capacities so you can safely tow with your Charger. In order to do so you will need a number of parts, which I'll list out for you in order to make it easy to order: - Draw-Tite Trailer Hitch Receiver # 36548 - T-One Vehicle Wiring Harness # 118404 - Draw-Tite Drawbar # 36061 - 2"...
view full answer...

Redarc Tow-Pro Elite Brake Controller Unique Features That Set It Apart From Competitors
The Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional # RED44FR has some features that other brake controllers do not that make it easy to recommend despite the cost difference. The Tow-Pro Elite has a dash mount that doesn't have the typical knee knocker installation. It actually installs in your dash or console in one of the preexisting button locations or can be added so it looks like a factory part of your vehicle. This also is a really nice feature for...
view full answer...

Does Draw-Tite Trailer Hitch Fit 2023 Dodge Charger GT With All-Wheel Drive
I checked directly with the manufacturer, Draw-Tite, for you, and can verify that yes, their hitch does indeed fit your 2023 Dodge Charger GT with all-wheel drive. The correct part number for your Charger is the following: - Draw-Tite Max-Frame Trailer Hitch Receiver # 76145
view full answer...

Replacing the Lock and Lock Housing on a Sears X-Cargo Sport 15 CAV
Because of the drilling, you'll likely want to replace the full housing with part # SR03807, which will provide you with two locks, lock assemblies, and keys to replace the existing locks and keys.
view full answer...