Looks like you might have to trim the backside of the defuser of your 2019 Dodge Charger Scat Pack but from the pictures of it only the hitch opening should fit right between the vertical bars on the defuser and otherwise fit fine. view full answer...
For your 2006 Dodge Charger with rear spoiler I recommend the Thule OutWay Trunk Bike Rack # TH45JV. It was designed to work on vehicles that have spoilers. I have linked a video review of this rack for you. This is, by far, the easiest rack to install and it comes with one-keyed locks for both the rack and your bikes to deter theft. Check out the video of this rack.
If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's bike... view full answer...
The # C49480 isn't a hitch extender. It's actually just a 48 inch long hitch tube for fabrication purposes.
If you had a 2-1/2 inch hitch the Reese extender part # RP45292 is 34 inches long and might work well for you. view full answer...
Since none of the trunk rack manufacturers we carry anything that will fit with the spoiler of your 2009 Dodge Charger R/T the best solution would be a hitch mounted like the Swagman Trailhead part # S63365 with a hitch that fits your vehicle like the Draw Tite part # 76145.
The Trailhead is a really solid 3 bike rack that has all of the nicer features of more expensive racks but is at a better price. Hitch racks in general are more secure, provide a more solid attachment, are easier to... view full answer...
We have both Class II and III trailer hitches available for your 2011 Dodge Charger R/T. If you are going to use Class III hitch # C13093 then I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. If you also need a 2-5/16 inch use # 63847. For trailer wiring use # 118560.
If you are using a Class II trailer hitch, like Curt Class II hitch # C12064 or Draw-Tite hitch # 36548, you can use ball mount # C45520.
For... view full answer...
The first thing you are going to need is a roof rack that has crossbars that run from left to right. For that I would recommend you get the Rhino-Rack roof rack # RRVA126B-2, # RRRLKVA with clamp kit # DK298.
The Inno Gravity Ski and Snowboard Carrier # INA951 that you referenced is designed to fit square bars that have a range of 24-30 inches apart so the carrier will be compatible with this roof rack.
This carrier can also carry up to 6 pairs of skis so it should have plenty of ski... view full answer...
For your 2013 Dodge Charger with a spoiler the Hollywood Racks Expedition part # HRF6-2 is a great option. This trunk rack is confirmed as a fit for your vehicle and is specifically designed for vehicles with spoilers like yours so it will fit over and clear the spoiler well.
We had the chance to install this rack on a 2012 Charger similar to yours and we found it fit and worked well. See the link I attached to see the test fit.
If you plan on carrying any womens or alternative framed... view full answer...
The # ETBC7L was not supposed to include a circuit tester either as a separate item or as a tester built into the 7-way. If you installed this kit and ran the 12 volt power wire up to the battery a wireless style of controller like the Curt Echo # C51180 would fit and work great once synced to your phone. view full answer...
For a trunk mount bike rack that will easily clear the spoiler on your 2013 Dodge Charger you can use the Hollywood Racks Over-the-Top rack # HRF2-3. This rack has an additional upper arm piece that moves the top straps up and over that spoiler so no weight is put on it (since the spoiler is not meant to support weight). I have included a link to a video that shows how it works.
If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical... view full answer...
Yes, we have trailer hitches that fit your 2016 Dodge Charger SXT. The Draw Tite hitch part # 76145 would be a great option confirmed as a fit. For trailer wiring you'd then want the part # 118655 which is a confirmed custom fit.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball,... view full answer...
Yes, the Thule Kayak Carrier part # TH830 is a confirmed fit for square bars like the Sportrack roof rack part # SR1002.
This rack is a semi custom rack that is confirmed as a fit for your 2009 Dodge Charger, but if you wanted a rack that's custom fit for your vehicle and will fit better the Rhino Rack part numbers # RRVA126B-2, # RRRLKVA and # DK077 would be your best option. view full answer...
You can tow with your 2007 Dodge Charger SXT, and according to the owner's manual I looked up online you can tow up to 2,000 lbs. I highly recommend checking your copy of the owner's manual to verify the capacities so you can safely tow with your Charger.
In order to do so you will need a number of parts, which I'll list out for you in order to make it easy to order:
- Draw-Tite Trailer Hitch Receiver # 36548
- T-One Vehicle Wiring Harness # 118404
- Draw-Tite Drawbar # 36061
- 2"... view full answer...
The trailer hitch I recommend for your 2016 Dodge Charger is the Draw-Tite Trailer Hitch Receiver, Class II # 36548. This trailer hitch has a 1-1/4 inch receiver that will work well with your Thule Vertex.
The # 36548 hitch has been confirmed to fit all models of the 2016 Charger so it will work well for your Charger R/T Scat Pack. The maximum tongue weight capacity of this hitch is 300 pounds, so your 100 pound bike rack plus bikes will fall well within the hitch's capacity.
I really... view full answer...
Yes, installing a frame mounted trailer hitch on a 2019 Ram 1500 is much better for heavy duty towing than the standard bumper mounted trailer hitch as it not only allows for a higher capacity but it also allows for more leveling towing. The correct trailer hitch for models with the factory tow bumper is the Curt Trailer Hitch Receiver part # C13419 which bolts to the frame brace under the bumper. view full answer...
I have a solution for you, but the trailer wiring harness part # 118404 is for older models of the Dodge Charger than your 2012 model so I cannot recommend it for you.
Instead you would want the part # 118560 as it has been confirmed as a fit for your vehicle and would work well.
I attached an install video that shows it being installed on a 2012 Charger just like yours. view full answer...
I checked with Thule and the Thule Gateway Pro # TH45JV that you referenced has been confirmed as a fit for you 2010 Dodge Charger SXT that has a factory spoiler so it would work well for you.
I attached a review video for this rack for you to check out as well.
If you plan on carrying any women's or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Swagman Easy-Out Women's and Alternative Frame Bike Adapter # 64005 to provide a horizontal... view full answer...
For a 2013 Dodge Charger you can use # 118560 to add a trailer wiring harness. The other option is to use # C56135 from Curt. I have included a link to the installation instructions for this harness for you. view full answer...
Your 2019 Dodge Charger with a 6.4 liter V8 and your 2020 Ram 1500 with a 5.7 liter has oil filter threads of 22 mm x 1.5 mm which is one of the threaded filter sizes included with the # D15604 so it would work on both vehicles. view full answer...
The exhaust of your 2016 Dodge Charger has to be lowered to install the Curt hitch part # C13093. This is a pretty standard install step for hitch installs as there isn't a way to get a hitch past the exhaust. If you check out the install video though you can see that it's not really that difficult to pull off.
All of the hitches for this vehicle require this step. view full answer...
The bike rack you referenced, the Hollywood Racks Trail Rider part # HR200Z is exactly what i would recommend for your 2008 Dodge Charger to carry two bikes safely while not having to worry about the bikes hitting each other. This rack won't allow any movement of the bikes so they won't hit each other and also this is one of the more stable bike racks in this price range so it's a really great value as well.
For a hitch you'd need the Draw Tite part # 36548 and you'd have be set with a... view full answer...
Go To Results