The Thule Camber 2 hitch-mount bike rack # TH9058 is compatible with Class I, Class II and even larger 2-inch Class III hitches. This rack would be a great option isince you already have a hitch on your 2005 Hyundai Accent GT. Currently, (October 2023), we do not offer a hitch to fit your Accent.
The Camber 2 weighs in at around 28-lbs so even with this weight added to your bike's own weight you will be well within the 200-lb tongue weight limit for the hitch. view full answer...
With the Draw-Tite Sportframe Trailer Hitch Receiver # 24884 you will have approximately 8" of clearance to the bottom of the hitch on your 2012 Hyundai Accent. Please be aware that this is an estimate as if your particular vehicle may have larger or smaller diameter tires. Also the amount of weight that is being carried inside your Accent will change your hitch height as well as aged suspensions may sag a bit due to age.
I recommend installing the Hopkins Tail Light Converter Kit # HM48925... view full answer...
You would be looking at about 9 inches from the ground to the bottom the receiver on your 2015 Hyundai Accent hatchback using a trailer hitch such as # 24884. To that 9 inches you would add 1-1/2 inches for the wall thickness of the receiver and the opening. Then you would add about another 6 inches for the height of the basket part of 17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs Item # C18145.
That is a total of 16-1/2 inches from the ground to the top of the carrier... view full answer...
The diameter of the tube (the hole the skid goes in) is 1-3/8 inches for the Replacement Shoe Tube Holder for Fisher Snowplow # 3371303310. view full answer...
The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24884 is a fit for your 2014 Hyundai Accent. You are correct that cars aren't really designed for heavy hauling, so you do need to stay within the capacities of your owner's manual and the products themselves. The 3 bolts you referenced are grade 5 and will secure the hitch at the rated capacities without issue.
This hitch is rated for 200 lbs tongue weight and up to 2,000 lbs towing but the manufacturer... view full answer...
The ones you were looking at item # SR1002 fit the sedan. For your 2010 Hyundai Accent hatchback, with a naked roof there, is one option to add a roof rack. I have listed the parts you will need below:
Inno Square Crossbars - Steel - Black - 46" Long - Qty 2 item # INB117
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4 item # INSUT
Short Roof Adapter Kit for Inno Square Crossbars item # INJK
Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet item # INK214 view full answer...
It sounds like you are ready to go with the cross-country trip and your 2009 Hyundai Accent.
The Draw-Tite, part # 24795 you mentioned is designed to fit a 3 door hatchback Accent. This is a Class 1 hitch with a 1-1/4 inch receiver opening.
You will want to check your owner's manual or with your dealership to make sure you do not exceed the towing or tongue weight capacity for your Accent.
You said you have the Curt Wiring, part # C56175. Per Curt, this wiring harness is not designed... view full answer...
Yes, we do. It is the Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # 521634-1. I confirmed with Roadmaster that this is the only base plate for the manual transmission models. To flat tow your manual transmission 2014 Hyundai Accent GS 6 you will also need the following parts:
Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Crossbar Base Plates item # e64ZR
Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267
Supplemental... view full answer...
The best place to confirm a vehicle's rated towing capacity, or to find out if it even has one, is the owner's manual. Since equipment can vary between versions of a vehicle sometimes the towing/cargo weight capacities may also differ. If you cannot find a definitive statement in your owners manual then you may want to speak to your local dealership, giving them your car's VIN number. This way your specific vehicle's capacity can be confirmed absolutely.
Do please note that all of the... view full answer...
The side to side center to center bolt hole spacing of the Curt # C115448 hitch is 41.38 inches. One each mounting flange, the bolt holes are spaced 6.56 inches center to center. I've provided a photo showing these dimensions.
The hitch is a confirmed fit for the 2018-2021 Hyundai Accent Sedan. view full answer...
The dimensions of the top T-channel in Rhino-Rack Vortex Aero Crossbars like # RRVA126B-2 measure 0.25 inches deep x 0.86 inches wide inside the channel. The top of the channel measures 0.43 inches wide.
As for the hardware that installs in to the channel, those vary in size. What is important is just that they fit into the channel and can be tightened down. A good example of some mounting hardware is the Eye Bolt Kit for Rhino-Rack Pioneer Platform Rack # RR43178. The length is 2.36... view full answer...
Increasing trailer wheel/tire size is sometimes possible and can provide certain potential benefits, but a larger tire does not necessarily gain anything. If your concern is weight load capacity then you may simply need to change your tires only, to a higher Load Range rating in the same size, that can mount on your current wheels.
The worst enemy of a trailer tire is heat. Heat arises from three main causes: overloading the tire beyond its weight capacity, incorrect inflation pressure... view full answer...
The measurements needed to install the Sportrack Roof Rack part # SR1010 on your 2014 Hyundai Accent are the same as what the 2013 takes.
The bar width dimension for both bars is 14 inches, from the seam between the front and rear doors to the front bar measures 10 inches, and then from the center of the front bar back to the rear is 26 inches. view full answer...
I went out to the warehouse and pulled an Extra Offset Trailer Spare Tire Carrier, # DL22145, to measure. Using an angle finder, I determined that the stem is angled up 20 degrees and the surface where the spare would mount is angled down 65 degrees. This is assuming the mounting bracket is flat against a level trailer frame. view full answer...
The trailer hitches that fit your 2011 Hyundai Accent 3-door hatchback are the 1-1/4-inch Class I type like # 24795 from Draw-Tite. All hitches for your car include the required hardware, install without drilling and share a 2000-lb maximum towing capacity.
According to my research the Accent is not formally rated to tow any trailer weight (see page 2-20 in your manual). However, I did also find owner comments indicating that small trailers have been successfully towed with the car. Its... view full answer...
Go To Results