Expert Answers about Mazda 3
- Recommended Hidden Hitch For A 2015 Mazda 3 Sedan
- When it comes to installing a trailer hitch on your 2015 Mazda 3 Sedan that is completely hidden I recommend The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2 inch # 306-X7303.
The trailer hitch has an easy, bolt-on installation with no drilling required, and has a black powder coat finish that offers superior rust protection. It has a sturdy, lightweight alloy construction.
The trailer hitch has a maximum gross trailer weight up to 2,000 pounds and has a maximum tongue weight...
view full answer... - Need Installation Hardware for Draw-Tite Sportframe Class I Hitch # 24816
- Replacement hitch installation hardware can be ordered easily for you Draw-Tite Sportframe Class I Hitch # 24816. Enter the part # RHK into our search box. Then enter the hitch part number 24816 in the box provided and select the manufacturer Draw Tite from the drop-down menu.
For reference I have linked you to two helpful articles on hitch installation.
If you will use this hitch with a bike rack or other accessory be sure to select compatible Class I items. I have linked you to our...
view full answer... - Parts Needed to Add a Thule SquareBar Roof Rack to a 2013 Mazda 3 Hatchback
- For the 2013 Mazda 3 hatchback with fixed mounting points, to install a Thule square bar roof rack you will need the following parts:
47 inch SquareBars, # TH712200
Rapid Podium Foot Pack, # TH460R
Fit kit, # THKIT3069
I have included a link to a video demonstrating the SquareBars for you.
view full answer... - Adapter Kit to Mount HullRaiser Kayak Carrier Y04035 on Yakima JetStream Crossbars
- The adapter you need to mount your HullRaiser kayak carrier on your Yakima JetStream roof crossbars is kit # Y03539. The adapter # Y8860031 that you referenced is for use with factory crossbars.
view full answer... - Options for Carrying Cargo While Towing a Lightweight Trailer
- I may have a solution for you, however, we do not have any hitch mounted cargo carriers that have a 2 inch receiver for a ball mount for a trailer. I am not aware of any other cargo carrier manufacturers that offer this feature. The problem that you will run into is that the tongue weight for the trailer would be too far back from the trailer hitch which puts additional torque and stress on the hitch, vehicle frame, and cargo carrier. Even with a seemingly light tongue weight, the distance...
view full answer... - Recommended Roof Rack with Bike and Kayak Carriers on a 2017 Mazda 3 with Fixed Mountig Points
- We do have black roof racks that install into the fixed mounting points on your 2017 Mazda 3 that don't use the clamps around the door frames. Although, you're correct that all of them stick out passed the feet so they aren't the OEM look you're trying to get.
The rack I recommend is a Yakima system with their 50 inch JetStream bars which uses:
50 inch JetStream Crossbars # Y00425
SkyLine Towers # Y53TR
Landing Pad 11 # Y00233
I've linked a video of the SkyLine towers being installed...
view full answer... - Recommended Hitch w/ a 2 Inch Receiver for a 2020 Mazda 3
- I would be happy to help you. For your 2020 Mazda 3 Sedan you're going to want the EcoHitch Hidden Trailer Hitch Receiver item # EH23VR. This hitch has a 2" receiver opening and you will not need an adapter to use your bike rack. This hitch is custom fit and bolts directly to your Mazda's frame with included hardware.
view full answer... - Which Drawbar Kit Works Best For My 2018 Mazda 3 Hatchback
- When It comes to your 2018 Mazda 3 Hatchback The Draw-Tite Sportframe Trailer Hitch # 24914 works perfect for you. It has a 1-1/4 by 1-1/4 inch opening, it's a class 1 hitch that can tow up to 2,000 pounds and has a tongue weight up to 200 pounds. Now I recommend to look in your manual to make sure how much your Mazda is rated for.
When it comes to the proper ball mount, The Draw-Tite Drawbar # 3593 will work for you. It is a class 1 mount that will work perfect with Draw-Tite Hitch #...
view full answer... - Hitch for 2013 Mazda 3 Hatchback to Allow Use of Bike Rack
- The various 1-1/4-inch Class I trailer hitches for your 2013 Mazda 3 Hatchback all will fit both versions of the vehicle; those with LED lighting and those without. All share the same 200-lb tongue weight capacity and all are rated as fairly simple installations. Since they all have the same capacity, I suggest the most cost-effective option, # 24843 from Draw-Tite. I have linked the installation instructions as well as two helpful article concerning hitch installation.
With this hitch...
view full answer... - Parts Needed to Flat Tow a 2008 Mazda 3 Behind an RV
- The Tracker tow bar # RM-020 has the capacity to tow the 2008 Mazda 3 behind your RV but Roadmaster does not offer base plates for the 2008 Mazda 3. You will need base plates so the tow bar has something to attach to. The only base plates for the vehicle are from Blue Ox, # BX2523. So instead of the Roadmaster Tracker you could use the Blue Ox Adventurer # BX7322.
Tow bars install easy. The base plates on the other hand are more involved. It is recommended to have them professionally installed...
view full answer... - Parts Needed to Use the Inno Locker Watersport Roof Rack with Rhino Rack Crossbars on a 2014 Mazda 3
- To use the Inno Locker Watersport Roof Rack # INA446, you will need either round, square, aero or elliptical crossbars.
It sounds like you are looking at the Rhino Rack roof racks for your 2014 Mazda 3. I would recommend the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. The aero style is the most common style of bar. It offers better aero dynamics for less noise and with it being the more popular style, it is the most receptive for roof rack accessories.
To use the # RRVA126B-2 crossbars...
view full answer... - Hitch and Wiring for 2009 Mazda 3 Hatchback Grand Touring
- We can help you get your 2009 Mazda 3 Grand Touring Edition ready for your utility trailer.
Curt Class I hitch # C11386 is a good choice along with ball mount # C45016. You will also need a hitch ball, either 2-inch ball # A-82 or 1-7/8-inch ball # A-80. Just check the coupler on the trailer; it will be stamped or have a sticker to indicate the ball size required. This hitch has a 2000-lb trailer weight rating, meaning that the loaded trailer and its contents must remain within that limit....
view full answer... - T-Bolt Kit To Adapt Thule SUP Taxi To The T-Slot Instead Of Using Speed Link
- To adapt the Thule Sup Taxi # TH810001 replaced the 810 model but installs in the same way. To use the T-slots on Thule crossbars, you will use the Thule Xadapt12 Watersports Adapter for AeroBlade and AeroBlade Edge Bars # THXADAPT12. This kit will work with many Rhino-Rack and Yakima crossbars as well. I've also attached a photo of the measurements of this other t-bolts to help.
view full answer... - What HItch Will Fit My 2018 Mazda 3 Hatchback
- When installing a hitch on your 2018 Mazda 3 Hatchback I recommend The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2 inch # 306-X7305. This hitch has a concealed cross tube, that has a gross towing weight up to 2,000 pounds and a tongue weight up to 300 pounds. I would check your manual to double check the towing capacity for your vehicle. It has a black powder coat finish that offers superior rust protection.
Depending on what you're using your hitch for I would also recommend...
view full answer... - Will Saris Bones Trunk Bike Rack Fit a 2012 Mazda 3 Hatchback
- The Saris Bones 2 Bike Rack # SA805BL is a very popular option that fits your 2012 Mazda 3 hatchback as long as you don't have the rear spoiler. If you do have the spoiler then you need the Saris Bones EX 2 Bike Rack # SAR83FR instead.
These have anti-sway straps but these essentially just limit the amount of bike movement so to avoid bike to vehicle and bike to bike contact you'll want to use the Protect-O-Pads # SA2060. I also recommend using the Stabilizer Straps # SA3033 to help keep...
view full answer... - Which Thule Roof Rack Fit Kit Fits a 2003 to 2016 BMW X3
- The BMW X3 first year of production was 2003. From 2003 to 2010 the X3 either had factory crossbars with side rails or just side rails so it would not use a fit kit or any kind of foot pack. It would instead use the Evo raised rail feet # TH710401 and 43 inch SquareBars # TH712100.
The 2011 to present models could have either a normal roof or flush side rails. If it has a normal roof then there are no Thule roof rack fit kit options that will fit. But if it has the flush side rails then...
view full answer... - Is a Replacement Base Pad Available for the Inno Custom Fit Kit Available?
- The Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK440 is only available as a complete set and the rubber base you're looking for is not available separately.
So you'd need to purchase the entire kit to replace the missing base, unfortunately.
view full answer...
Go To Results