The Wheel Masters Lug Nut Cover Pliers # WM8211 is designed to remove the lug nut covers on a RV. We have used sockets to remove the covers in the past but using this tool lessens the chance of damaging the finish. view full answer...
The bolt size that comes with the Timbren kit part # TWRW22 is M10x60mm x 1.5. Basically just enough of the bolt comes through the assembly and frame to secure it with the nut on the truck frame. view full answer...
The Air Lift Kit part # AL81560 that you referenced is the correct air bag kit for the front springs of your 2000 Workhorse P30 chassis that your Itasca Sunrise is built on. You would need to remove what is there now and install these in place of them.
I wish we had the bushing you need, but at this time we do not have stock sway bar bushings for RVs like yours. view full answer...
The Wheel Masters Tire Pressure Valve Extenders - 90-Degree Bend - Front Wheels # WM802990 technically are designed for the front wheels, but there are several customers that left reviews stating that it worked on their rear wheels. It really just depends on the layout of your current valve stems and if it requires a bend at all.
I recommend looking into Wheel Masters Tire Pressure Valve Extenders - 135-Degree Bend - Steel Rear Wheels # WM8029135 or Wheel Masters Tire Pressure Valve Extenders... view full answer...
Yes, since the Wheel Masters 2-Hose Inflation Kit # WM8005 is NOT an airless kit it will have air pressure in the lines which will allow a tire pressure monitor system to easily work with it.
I attached an install video for this kit for you to check out as well. view full answer...
I found the Snap Pads you need for your Winnebago Workhorse Sightseer WPD26P with the part # SP84FR. These are sold individually so you'd need to order a quantity of 4 of these. view full answer...
Based on the year and serial number from the Kwikee Series 32 steps you have on your 1999 Winnebago Brave the correct solution you need is the Motor Upgrade Kit for Kwikee Electric RV Steps # LC379145 which comes with the new motor, new module, and correct gear box. view full answer...
There are only certain bike carriers that are rated for use behind a motor home. this is because the distance from the rear axle to the back of the motor home is greater than that of a passenger vehicle. So what happens is a lot of movement and jarring of the carrier, like riding at the back of a school bus.
The Yakima HoldUp # Y02443-2 is not rated for use at the back of a motor home. I have included a link to all of the carriers that are rated for use at the back of a motor home.
For... view full answer...
I have a great solution for a steering stabilizer that fits your 2006 National Sea Breeze built on a Workhorse W22 chassis but we don't have a Blue Ox option instead you'd want the Roadmaster stabilizer part # RM-RBK13-RSSA which is confirmed as a fit and would do an excellent job. view full answer...
The only 12V 5,000 watt inverter we have available is the Go Power # 34280179. This is an excellent modified sine wave inverter to provide AC power that features built-in safety features to protect your cabin's electrical system and multiple connection points to connect your devices and cables.
This particular unit does not have an integrated transfer switch but you can add the Go Power Automatic Transfer Switch # 342GPTS to your setup. This pre-wired transfer switch will automatically... view full answer...
Since we know your Damon Avanti is built on a W16 Workhorse chassis the correct rear sway bar you'd need is the part # RM-1259-118 which will make the biggest improvement in handling and stability. Then the next thing you'd want is the Roadmater front sway bar and TruTrac kit part # RM-1259-116. view full answer...
It definitely is the case that any vehicle can have a brake controller installed in it. They are pretty universal in how they install but some vehicles have pre-wiring which makes it a bit easier to install them. So to install a brake controller like the Redarc Tow Pro Elite part # RED44FR you would need to first have a 4-way harness installed like the # 119190KIT. Then you would need to convert it to a 7-way with the kit part # ETBC7 which comes with the wiring needed to wire in the brake... view full answer...
The Furrion Chill RV Air Conditioner and Air Distribution Box would work well to replace an existing roof vent as they both will use the same size 14-1/4" x 14-1/4" cutout. That said, it would need to be used with its own included thermostat as is the case for any air conditioner as they are not universal. The part # FR92PR has controls on the unit and the # FR55PV(also 15,000 BTU) has a separate wall controller. view full answer...
The Lippert Kwikee 28 Series Electric Step # LC3747452 that you referenced is a great single step option that is extremely popular as an OEM application and does a great job.
This step has mounting bracket dimensions of 24-1/4" wide x 5-7/8" tall x 8-9/16" deep so if your current mounting dimensions match up to this then you are good to go! view full answer...
I have a replacement option for you, but we reached out to Blue Ox and unfortunately since the Blue ox Aladdin tow bar BX4325 has been discontinued for a few years there is not a replacement arm available.
Instead I recommend replacing your tow bar with the Blue Ox Ascent Tow Bar - Motorhome Mount - 2" Hitch - 7,500 lbs # BX4370 which has the same 7500lb weight capacity as your Aladdin and is overall easier to use since it has an easier telescoping arm setup. view full answer...
For your 2003 Workhorse W22 the recommended rear sway bar is the part # RM-1259-108 which is a 1-1/2 inch diameter bar. This will work great and would not be a compromise in any way. view full answer...
I do not have an option rated that high for any coaches. The closest I can get you is the Curt Adjustable Trailer Hitch Receiver part # C13701.
It is rated for 500 lbs. of Tongue Weight and 5,000 lbs. of Gross Trailer Weight.
You do need to check your Workhorse Owner's manual to see what it is rated for as a maximum as well and not exceed that. view full answer...
For the Workhorse W42 chassis we have the Timbren rear suspension kit part # TGMRP30 but we don't have any air spring solutions. The Timbren kits offer the same support without requiring you to worry about air pressure and leaks though. view full answer...
Yes, the SumoSprings Maxim kit part # SSR-280-54-1 would work great to improve the ride quality and handling of your 2005 Workhorse W22 that already has a rear sway bar installed on it. This will further create more stability and get rid of any remaining sway left. view full answer...
For the simplest and most straight forward 13.5K btu replacement of your current Dometic air conditioner we have several options. Each of these AC's plug directly into your Dometic setup to work with your existing air distribution box. The Advent Air RV Air Conditioner, # ACM135 is a 13,500 Btu unit that comes in white cover. The # ACM135B is the same unit with a black cover.
We also have these same units configured with a start capacitor, # ACDOM135 in white and # ACDOM135B for black.
All... view full answer...