Yes, if you add the Pop & Lock Custom Tailgate Lock # PL54FR and you have a tonneau cover that can only be opened if the tailgate is down, then when you use your key fob to lock your 2019 Toyota Tacoma someone will literally need to break into your vehicle to get at any cargo whether it is in the cab or in the bed. view full answer...
The RetraxONE XR Hard Tonneau Cover w/ Trax Rails - Retractable - Lexan - Matte # RTT-60851 is the fit for a 5 foot bed on a 2020 Toyota Tacoma you are seeking.
The # RTT-60852 is only a fit for the 6 foot bed model as you referenced. view full answer...
The Inno Tire Hold 2 Bike Platform Rack part # INH120 is a wheel mount bike rack and wheel mount bike racks cannot be used on bikes with fenders. Therefore, you will need to use a different bike rack. I recommend the Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting # C18085 which is a frame mount bike rack therefore there won't be any issues with bikes that have fenders. view full answer...
The Thule Canyon XT Roof Cargo Basket - Steel - 49" x 40" x 6" - 150 lbs, Item # TH859XT will fit most crossbars, so that is not a concern. You will need to measure the crossbar spread which is the distance between the crossbars when measured from the center of one to the center of the other. The Thule # TH859XT will work with crossbars that are spread between 20 inches and 37 inches apart when measured from center of front crossbar to center or rear crossbar.
Check out the attached... view full answer...
The Yakima OverHaul HD # Y01151-58 clamps to the inner lip of the bedrails so you would only be able to use a tonneau cover like the RetraxPRO XR Hard Tonneau Cover # RTT-80851 you were looking at since it has accessory T-Slots to accept the ladder rack when using the adapters # Y01155.
The only other compatible option we currently offer would be the Pace Edwards UltraGroove Retractable Hard Tonneau Cover # 311-KRTA10A38, which also has rails with T-Slots that can accept the adapters. view full answer...
Yes it is. The Replacement Control Knob item # RED78FR is the replacement knob for the Redarc Tow-Pro Elite brake controller EBRH-ACCV3 or item # RED44FR. view full answer...
Thank you for the purchase of the etrailer Trailer Hitch # e98844!
I recommend using this Tekonsha wiring harness for your 2018 Toyota Highlander:
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - # 118449
The T-One is the most reliable style of wiring harnesses we carry so you can be confident this will last you a while. You'll want to secure this to your trailer hitch using the mounting brackets # 18144 and # 18140. view full answer...
It looks like you have the older HullRaiser J-Style kayak carrier 8004029 that mounts directly to round bars.
You can upgrade them to fit aero-style crossbars by using the MightyMounts and the Yakima Bolt Upgrade Kit 8860007. Unfortunately this bolt upgrade kit was discontinued a number of years back and Yakima doesn't list the specs. This means you can either get the MightyMounts and find some hardware locally to make it work, or you can upgrade to a newer carrier set. Here are the MightyMounts... view full answer...
So long as your 2023 Toyota Corolla hybrid is a sedan, there is a trailer hitch that will fit, from Curt:
- Curt Trailer Hitch Receiver # C34UR view full answer...
Yes, the Clazzio Custom Seat Covers part # AL-EATOB2104BK which are a fit for your 2007 Toyota Tacoma Double Cab so long as you have the fold flat passenger seat (see photo) will still allow for access to the rear storage compartment under and behind your rear seats. view full answer...
The best option to replace your round 5-1/2 inch tail lights are surface-mounted LEDs because they are going to be the brightest, last the longest, and be the easiest lights to mount.
There are two options that are similar except for the lenses, though both give you stop, turn, tail and back-up functions. The LED Trailer Tail Light # 328-003-6019R only has a red lens, but uses white LEDs for the back-up while the Fusion LED Combination Tail Light # STL201XRFHXB also has white LEDs but... view full answer...
When you are getting a snow tire chain for your 2012 Toyota Sienna, you should use the fit guide for your vehicle. Unless your tire size is not listed as an available tire size in the snow tire chain fit guide, the fit guide takes precedence. For example, your tire size, 235/50 19, is compatible with the Konig Self-Tensioning, Low-Pro Snow Tire Chains - Diamond Pattern - D Link - Easy Fit SUV - Size 247, part # TH04115247, but not when they are on a 2012 Toyota Sienna. You can go with the... view full answer...
For your 2022 Toyota RAV4 we have the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13416.
If you need a wire harness use the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
# C56434. view full answer...
The RockyMounts LoBall Bike Rack for Truck Bed Factory Track Systems part # RKY1097 is designed to be used with bikes under 35 lbs that use a 9mm quick skewer. If your bikes meet these two criteria then it will work. In regards to the tonneau cover, so long as it does not mount where you wish to mount the fork block there won't be an issue. view full answer...
The only option for a 1994 Toyota Townace van that is imported is going to be a universal SeaSucker roof rack:
- SeaSucker Monkey Bars Roof Rack # 298-SX6000B
Since there isn't a custom-fit roof rack for your van, this would be the only option we know will work for you. It is a vacuum-cup roof rack that will attach directly to the top of your van, giving you a rack system with round bars that will allow you to mount accessories.
I have added a link below to a video review for you to... view full answer...
I spoke with a representative from Rocky Mounts. He told me the RockyMounts BrassKnuckles Roof Mounted Bike Rack - Wheel Mount - Black, part # RKY1201, can carry bikes with wheelbases up to 48" in length. So this bike rack will not be compatible with your bike with a 49" wheelbase.
I have included a video review link below. view full answer...
Yes, the Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48" Long x 38" Wide. part # RR42114BF, will fit the factory roof rack of your 2022 Toyota 4Runner. Your factory roof rack will have a weight limit of 109 lbs. That includes the weight of the platform, 32 lbs, and the items that you will be carrying.
I have included a video review link below. view full answer...
After reading your question, it appears that you would like your front crossbar to be further forward on the roof of your vehicle. The Yakima system you are referencing, the old Q-tower system or its replacement the BaseLine system, are for naked roof applications. That does not apply to your vehicle. Your 2018 Toyota 4Runner has raised rails with fixed points, so a rack that attaches to the frame of your vehicle will not work. Your roof rack will attach via the Yakima Landing Pads which... view full answer...