bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Toyota Sienna


  • Is The DeeZee Red Label Truck Bed Tool Box Rated For Standing On
  • I spoke with the manufacturer of the DeeZee Red Label Truck Bed Tool Box # DZ8537B and they stated the this tool box is not rated to be stood on or have heavy objects placed on top of it. Doing so could bend the aluminum and damaged the box.
    view full answer...

  • How to Attach a Wiring Harness to a Hitch on a 2021 Toyota Sienna
  • We do have the Tow Ready No-Drill Mount for Electrical Mounting Bracket # 18140 and Mounting Bracket 4-Pole Flat # 18144 that can be used together and then attached to any hitch. This will keep a 4 Flat plug, like the Tekonsha # TK69FR from hanging down, but neither the Draw-Tite or Curt hitches have a pre-welded bracket for this. With that being said, I recommend going with the Curt # C22UR. This assembled in America and is rated to 3,500 pounds towing and 350 pounds of tongue weight....
    view full answer...

  • Bike Rack Compatible With A Kids Bike With Training Wheels
  • The training wheels may interfere with the SuperClamp EX 4 # SA4026F cradles. If you're not wanting to take the training wheels off every time, you could go with this rack # S64400 which is a hanging style. This will give you 6 inches between each cradle so it should leave enough room for the training wheels.
    view full answer...

  • Recommended Tire Chains For 2012 Toyota Sienna SE With 235/50-19 Tires
  • For snow chains on tires sized 235/50-19 I recommend the Konig # TH01594247chains that are self tightening and "Class-S" low profile sized for tight wheel well clearances. The other choice is Pewag # PWRSV79, also self-tightening and Class-S. I would probably pick the Pewag as they have square links that offer more traction. Before purchasing or installing tire chains, consult your owner's manual or the vehicle manufacturer for any advice or prohibitions they might have regarding the...
    view full answer...

  • Fit of Weather Tech Cargo Area Mat in 2012 Toyota Sienna
  • The # WT41446 you mentioned is designed to fit in the bottom of the floor well where the 3rd row of seats store when not being used. It sounds as if you are speaking of a covered storage area that goes into this space. My WeatherTech representative was unaware of this sort of storage option being an option of the 2012 Sienna, so they could not tell me if the mat would lay flat on the area you describe. The mat measures 47.9 x 17 inches. If the covers on the storage area you are speaking...
    view full answer...

  • Will Anderson Alumistinger Ball Mount # AM3507 Fit CURT Hitch on 2013 Toyota Sienna
  • We have 2 CURT hitch receivers that fit your 2013 Toyota Sienna. The CURT Trailer Hitch Receiver # C13105, a Class III, 2 inch receiver that uses the # 2753 ball mount and provides a 4 inch drop or 2-3/4 inch rise. I have provided a link to instructions on the proper installation of this item and a link to a video showing the installation of this product on a 2012 Toyota Sienna. We also carry the CURT Trailer Hitch Receiver # C12065, a Class II 1-1/4 inch receiver that comes with the CURT...
    view full answer...

  • What Type of Trailer Wiring Does Saris Door County Bike Rack Need for 2019 Toyota Sienna SE
  • The lighting of the Saris Door County Bike Rack for E-Bikes part # SAR42RR does require a 7-way connector installed on the tow vehicle. Now there is a 7-way kit that fits your 2019 Toyota Sienna with the part # TK87FR but since you only need the taillight wiring and not a brake controller (for trailer brakes), it would be most cost effective to go with the 4-way kit part # 118648 and then use the 7-way adapter part # 37185 instead. There wouldn't be any ground clearance issues with this...
    view full answer...

  • Will 2 Sets of Malone DownLoader Kayak Carrier Fit OEM Crossbars on a 2012 Toyota Sienna
  • Installing 2 of the Malone DownLoader Kayak Carrier # MPG114MD on your 2012 Toyota Sienna is definitely possible. When in the upright position these measure 17" long but you'll be taking a bit of that length away because you will be able to put the end with the loading ramp over the ends of your crossbar system. Even though you can fit 2 sets of the DownLoader on your Sienna it would still be worth mapping out the distance and try holding your kayaks at an angle inside that length. If...
    view full answer...

  • 7-Way Wiring and Wireless Brake Controller Recommendation for a 2021 Toyota Sienna
  • Since your 2021 Toyota Sienna already has a 4-Way flat connector you need to install the 7-Way Upgrade Kit # ETBC7L and so you can use the Curt Echo Wireless Brake Controller # C51180. This plugs into the 7-Way and you change the settings via an app on your phone. If you don't want to add another step to your towing setup then you can install the Universal Installation Kit # ETBC7 instead which comes with everything you need for a fully-functioning 7-Way connector. Then for a brake controller...
    view full answer...

  • Is There etrailer Hitch that Fits 2016 Toyota Sienna that is Mostly Hidden
  • I watched all of the install videos we have for the etrailer hitch part # e98837 that fits your 2016 Toyota Sienna and they all have the crosstube behind the hitch opening so I am not totally sure what you may have watched. If you wanted a similar hitch that does only have the hitch opening below the rear bumper we do have the # e98853 which may have been what you watched a video of.
    view full answer...

  • Trailer Hitch Receiver Fit on 2021 Toyota Sienna
  • We do offer a trailer hitch receiver that I confirmed with the manufacturer is a direct fit for your 2021 Toyota Sienna, which is from Curt: - Curt Trailer Hitch Receiver # C22UR This is an easy bolt-on installation and will give your 2021 Sienna a Class III hitch with a 2 inch receiver. It has a 3,500 lb towing capacity and 350 lb tongue weight capacity; I have added some photos of this hitch installed on a 2021 Toyota Sienna so you can see how it will look when installed on yours.
    view full answer...

  • Why Is The RV Per Bike Weight Capacity Lower For The Yakima OnRamp Bike Rack
  • The suspension of an RV is much less sophisticated than a standard vehicle so it places more stress on the Yakima OnRamp # Y36FR. Because of the additional wear and tear on the bike rack testing has shown that adding more than 40lbs can damage the rack, leading to damage of the e-bikes. The Yakima StageTwo Bike Rack for 2 Bikes # Y47VR is rated for RV use and has a 60lb per bike capacity when used on an RV. It mounts via the wheels using a strap and ratcheting arm so if you have front...
    view full answer...

  • Hitch Adapter to Tow Trailer and use Bike Rack
  • There is an option for you, though the part you asked about is not for use with trailers. Instead, I recommend the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers # D210. This will give you a ball mount for use when towing your trailer, and a receiver above it which you can use for your bike rack. You can secure it to your Sienna's hitch with the etrailer Trailer Hitch Receiver Lock # e98880 or Pin and Clip # PC3. For a hitch ball, depending on the size...
    view full answer...

  • Will the Rhino-Rack Ski and Snowboard Carrier Fit on 2021 Toyota Sienna Factory Crossbars
  • If your 2021 Toyota Sienna has factory crossbars that are no wider than 3-3/4" and not taller than 7/8" then yes, the Rhino Rack # RR576 will fit; these carriers are designed to fit on most aftermarket and factory crossbars, so this shouldn't be an issue.
    view full answer...

  • Mostly Hidden Trailer Hitch for 2017 Toyota Sienna
  • The most hidden trailer hitch we offer for your 2017 Toyota Sienna SE is the etrailer part # e98853 which only has the hitch opening hanging below the rear bumper of the vehicle. Most other options have the crosstube that hangs below it as well.
    view full answer...

  • Does Installation of the Curt Hitch for 2021 Toyota Sienna Affect Hands Free Liftgate Use
  • We haven't received any definitive feedback on the installation of the Curt # C22UR on the 2021 Toyota Sienna and it limiting the functionality of the hands free liftgate. While it's possible, the large majority of the time when trailer hitch receivers are installed on a vehicle with this feature you simply need to kick your foot to one side of the receiver instead of the middle to activate the lift gate. This isn't an uncommon problem but we haven't seen anything that would lead us to...
    view full answer...

  • Can Swagman Quad 2+2 Bike Rack Be Used On Stromberg Carlson Bike Bunk Bike Rack Carrier?
  • I have a solution for you, but the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier # CC-275 still requires an RV-compatible bike rack to be mounted to it, so the Swagman Quad 2+2 # S64FR would not work for this. I recommend looking into the Swagman Original - 4 Bike Rack for 2" Trailer Hitches # S64400. This is a 4-bike carrier that fits into the 2" opening on your bike bunk carrier. This is compatible with RV / travel trailers and is your best solution for your application....
    view full answer...

  • Recommended Roof Rack for a Vehicle w/ out Side Rails
  • Since you don't have the side rails there's only one option to add a roof rack to your 2017 Sienna. You will want the SeaSucker Monkey Bars Roof Rack item # 298-SX6000B. This roof rack attaches to your roof with suction cups and does not require drilling. It will give you a set of 48" round bars with a 150 lbs capacity. I have linked an installation video below that will show you the functions of this roof rack.
    view full answer...

  • Does Air Lift 1000 Air Bag Kit Fit 2020 Toyota Sienna
  • Yes, the Air Lift 1000 kit part # AL60732 that you referenced is a confirmed fit for your 2020 Toyota Sienna AWD so it would work great for you.
    view full answer...

  • Can CargoSmart Square Hook Fit With Single Anchors
  • Yes, you can use the CargoSmart Small Square Hook # CS47FR with the single E-Track anchors: - Black # SLSB - Stainless Steel # SLSS - Matte Zinc # SLSZ - Unfinished # SLSU Since the anchors are rated for 1,000 lbs you'll be able to load the square hook up to the full 200 lb weight capacity.
    view full answer...