Expert Answers about Toyota Tundra
- Bracket Hole Size and Cable Hole Size For Installing Quick Connect Rear View Safety Kit
- I checked with Rear View and the Rear View Safety Trailer Tow Quick Connect Kit part # RVS-213-613 requires a bracket hole size of 0.17". The cable hole for the cable coming from the camera needs to be 0.8" and it is drilled into the vehicle body near the camera and bracket.
view full answer... - How to Determine if Trailer Hitch Will Fit 2019 Forest River Surveyor
- The Adjustable Width Trailer Hitch Receiver for RVs # 13703 is very likely to fit your 2019 Forest River Surveyor but these are not custom-fit hitches for trailers. I attempted to find out the type of frame your trailer has and the width of it but was unable to locate those specs.
A quick call to your Forest River dealer should provide you with the specs you need to determine if this hitch will fit. All you need to do is ask if this trailer has a box frame, C-channel frame, or I-beam...
view full answer... - Option for 3,500 lb Axle-Less Suspension System & Hubs With 6 on 5-1/2" Bolt Pattern
- While there is not a traditional thru-axle in that size, we do have an option for you with the Timbren Axle-Less Trailer Suspension System which are simply bolted or welded so you do not have to worry about finding an axle that meets any specific measurements.
They also offer you an improved ride compared to a traditional through-axle because the Timbrens work independently so if there is a bump on one side of the road it won't rattle your entire trailer. The Timbren system also gives...
view full answer... - Will CIPA Custom Towing Mirrors CM11300 Fit 2021 Toyota Tundra CM SR5
- The CIPA Custom Towing Mirrors # CM11300 are confirmed to fit all models of the 2021 Toyota Tundra, including your CM SR5. You can definitely order them separately, that is a great idea and there is no difference in the mirrors. You will need the Driver Side # CM11301 and Passenger Side # CM11302.
I have attached an installation video for your reference.
view full answer... - Wiring Harness to Install Curt Discovery Brake Controller on 2010 Toyota Tundra
- In order to install the Curt Discovery Trailer Brake Controller part # C84VV on a 2010 Toyota Tundra you'll need the Curt Custom Wiring Adapter for Trailer Brake Controllers part # C51362.
view full answer... - 2002 Toyota Tundra Does Not Have Correct Plug to Match Recommended Custom Wiring, What Can I Use?
- It looks like the 2002 Toyota Tundra should have an 8-pin square connector on the rear of the vehicle for the trailer wiring, and from the photo you're showing that is definitely not an 8-pin square connector; it's a 6 pin square. One of two things could have happened here.
I would first make sure that you've pulled the correct plug, since there are two very similar plugs placed right next to eachother on the 2002 Toyota Tundra. I've taken a screenshot of our installation video as a reference...
view full answer... - Bearing Buddy Bearing Protectors For a Hub With 1.97" Bore
- Here is a list of the Bearing Buddy bearing protectors which fit a 1.98" hub bore. This is the common size and most likely the size you need. Your hub may be reading slightly smaller due to some surface corrosion or a temperature difference.
Stainless Steel w/ Auto Check # BB1980A-SS
Chrome w/ Auto Check # BB1980A
Stainless Steel # BB84SR
Chrome # BB24SR
Personally I feel the Stainless Steel w/ Auto Check # BB1980A-SS is the best route to go as it will last longer and allows you to monitor...
view full answer... - Can the Carr LD Custom Fit Side Steps # CARR114501 be Added to Existing Running Boards?
- The Carr LD Custom Fit Side Steps # CARR114501 are a great option for adding steps to your 2008 Toyota Tundra, but these are meant to be installed onto the rocker panels underneath your vehicle. They cannot be added to your existing running boards, so you would have to remove the running boards to install these.
Check out the video linked below for more details.
view full answer... - 5th Wheel Hitch And Base Rail Compatibility With 2019 Toyota Tundra
- Yes the B&W Patriot 5th Wheel Trailer Hitch - Dual Jaw - 16,000lbs Item # BWRVK3200 and the Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches Item # RP50084-58 are a compatible together for your truck.
The Firestone Airbags Item # F2445 should not cause any issues for you while installing the base rails.
view full answer... - Recommended Tire Chains For A 2020 Toyota Tundra
- The Konig Tire Chains # KON94FR would be a compatible fit for your 275/65R18 tires and have a diamond pattern, which will give you a better grip since a diamond pattern chains will always have a part of the chain touching the ground. This will also help with the thumping you'd experience if you used a ladder pattern chain instead. These chains are the only diamond option that are rated for use on or off road so they'll be the best option for you on the unmaintained muddy roads.
Toyota...
view full answer... - Are There Larger Frame Brackets for Curt TruTrack Weight Distribution Systems
- Yes, there are longer frame brackets for the Curt TruTrack Weight Distribution Systems like part # C17501 which accommodate taller frames, the Frame Brackets for Curt TruTrack Weight Distribution Systems part # C17515 for 8" tall frames or part # C17516 for 10" tall frames. These like the original brackets feature a bolt-on install and come with everything you need to secure the spring bars to the trailer frame.
view full answer... - Compatibility of Oversized Weight Distribution Hitch for Temporary Use on 2400 lb Cargo Trailer
- That system is rated far too high as you know for that cargo trailer. The system will cause more issues than it will solve when used with your empty 2400 lb cargo trailer because it can cause to firm a ride for your suspension causing bounce and sway issues.
My recommendation is to get the Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 10,000 lbs GTW, 600 lbs TW # RP66082 which is rated for total tongue weights between 200 and 600 lbs which will work well for...
view full answer... - What Vehicles Do Tow Mirrors for 2008 Toyota Tundra Fit
- If you had the CIPA Towing Mirrors part # CM11300 that you referenced that fit a 2008 Toyota Tundra the mirrors would fit the following:
2008 - 2018 Toyota Sequoia
2007 - 2018 Toyota Tundra
view full answer... - Towing Mirrors for a 2016 Toyota Tundra that Retain the Factory Blind Spot Detection System
- I do have towing mirror options that will allow you to retain the factory blind spot detection system on your 2016 Toyota Tundra but the K-Source Custom Extendable Towing Mirrors part # KS70103-04T will not.
Unfortunately, none of our replacement towing mirror options retain the factory blind spot detection system. Therefore, the only option I have for you is a clip-on towing mirror like the K-Source Universal Towing Mirrors part # KS3891-2. These are one of the only towing mirror options...
view full answer... - Recommended Westin Running Boards for 2011 Toyota Tundra Double Cab
- I do have a solution for you, however the Westin Molded Running Boards # 27-0020-1725 referenced in your question are not designed to fit your 2011 Toyota Tundra Double Cab. As you mentioned, these particular running boards are compatible with the CrewMax model.
For your double cab, I instead recommend the Westin Molded Running Boards # 27-0010-1725. These are essentially the same style and design as the running boards you were looking at but they include hardware that is custom designed...
view full answer... - Brake Controller Plug Adapter # HM47815 for 2013 Toyota Tundra SR5 Double Cab V8
- The Hopkins Agility Trailer Brake Controller, part # HM47294 is a fit for your 2013 Toyota Tundra SR5 Double Cab V8 with the factory 7-way connector.The Plug-in Simple Brake Wiring Adapter, part # HM47815, is the mating plug-in adapter for the # HM47294 brake controller.
view full answer... - Is The Erickson Ladder Rack Compatible With A 2023 Toyota Tundra With Deck Rail System
- The Erickson Truck Bed Ladder Rack w/ Load Stops # EM07705 you're referring to isn't designed to work with the Deck Rail system installed in your 2023 Toyota Tundra and wouldn't be able to clamp onto the bedrail lip because of the rails so you would have to choose another model that's designed to mount into the rails like the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799.
This rack has a wider and flatter crossbar with a rubber strip in the center for better contact with items...
view full answer... - Can Thule Roof Rack Install in Yakima Roof Rack Tracks
- Thule roof racks can be installed in Yakima tracks like what you have. You'd need the fit kit part # THKIT3101 and the Podium feet like part # TH460R and the crossbars # TH711120 and you'd be set.
view full answer... - Which Fifth Wheel Custom Fit Kit Do I Need for My 2010 Toyota Tundra
- I have a solution for you, but the brackets and hardware for the RBW Lil Rocker are no longer available. The manufacturer, RBW no longer exists. You may be able to find some used parts for it but new parts are no longer available and I wouldn't recommend using used parts to install your fifth wheel hitch.
I recommend using a new installation kit with new rails and brackets. Using a universal kit with rails that it wasn't intended to be used with, like the rails from your Lil Rocker,...
view full answer... - Best Fifth Wheel Trailer Hitch with a Sidewinder on a Toyota Tundra Crewmax 5-1/2 foot Bed
- No you do not need a sliding fifth wheel hitch. Actually it is not recommended to use a Sidewinder with a slider hitch. It is also not recommended to use a gooseneck to fifth wheel trailer adapter with a Sidewinder either.
The Sidewinder is intended to give you the ability to tow a fifth wheel trailer with a shorter bed and is going to give you the most clearance possible. A great fifth wheel hitch to go with a Sidewinder is the Reese - Dual Jaw - 16,000 lbs. # RP30047 with the Reese...
view full answer...
Go To Results