Yes the 2018 Subaru WRX Roof Rack by Yakima comes with everything needed to attach directly to roof of your 2018 Subaru WRX. This complete system is made up of Item Numbers: # Y00425, # Y00148, and # Y00248. view full answer...
Yes, the SportRack # SR7011 will fit the OEM crossbars and factory rails on your 2016 Subaru Forester, as it's designed to fit most factory crossbars.
However this box is pretty long so it's possible you'll need to position it forward to allow you to open up the rear hatch, and even then they may hit. Similar length boxes require a gap of 12" or so from the rear crossbar to the hatch/roof gap for clearance, so if you can get that much space or more you should be ok. Sportrack doesn't give... view full answer...
For two of the LockRack kayak carriers to fit next to each other you'd need crossbars with around 60 inches of usable length which I am fairly certain your 2018 Subaru Outback Wagon would not have.
I'd recommend a carrier designed for carrying two kayaks like the Thule Compass # TH890000 which fits your vehicle's bars and does a really great job carrying 2 kayaks. I attached a review video for more info on this as well. view full answer...
The SportRack Horizon Rooftop Cargo Box part # SR7011 will fit the bill for you perfectly. It has a shorter rear than most allowing you to fully open your hatch and it will not interfere with your moon roofs operation.
I have linked a video for you on the box for you to check out that Evangaline did that will give you a great idea on the size. view full answer...
The Malone Foam Block Kayak Carrier part # MPG172 that you referenced is a 24 inch long foam pad style kayak carrier from Malone like it sounds like you are looking for. view full answer...
The Yakima Megawarrior Extra Large Roof Cargo Basket part # Y07080-82 does fit on the lower bars of the Yakima EasyRider Double Decker Trailer # Y08129 that you referenced without an adapter. Check out the picture we got from Yakima that shows the two installed together. view full answer...
We had the chance to install the Draw Tite hitch part # DT24959 on a 2017 Subaru Impreza Hatchback like yours so we can guarantee this hitch would fit and work great on yours. I attached an install video for you to check out as well. view full answer...
For your application I recommend using the Replacement Shank for Gen-Y Adjustable Ball Mount # 325-GH-304 because it's one of the few options that allow you to use a bike rack and tow dolly (most of them are for a bike rack and flat towing).
The Gen-Y has stacked receivers so you can have your bike rack installed in the highest position (with the receivers stacked going up from the shank) and then you can attach a ball mount or use the Dual-Ball # 325-GH-031 for the tow dolly. view full answer...
According to the owner's manual I looked up, there are no restrictions regarding flat towing your 2021 Subaru Crosstrek with manual transmission. All you will need are the right parts in order to flat tow your Crosstrek, and I'll list out the best ones below to make it easier for you to order.
- Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-52927-5
- Tow Bar: Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522
- Safety Chains: Roadmaster 80" Coiled Safety Cables... view full answer...
The Curt Trailer Hitch Receiver part # C13410 is a great option for a 2018 Subaru Outback Wagon. It has a 4,000 lb gross trailer weight and 600 lb tongue weight rating. The trailer hitch is tested separately of the vehicle so this does not mean you can abide by these capacities, the lower of the two (vehicle/hitch) will be what you need to abide by. It could very well provide more capacity than the factory hitch but you still may not be able to utilize the full capacity due to the vehicle... view full answer...
Okay, there's a lot to go over here, so let's get right to it with the best option for a hitch and 7-way for a 2017 Subaru Outback for you to tow your trailer. We'll start with the hitch:
- Curt Trailer Hitch Receiver # C13410
The reason I really like this hitch is because unlike other options, it does not require any drilling into the frame of your '17 Outback, and because it has a completely hidden design with only the hitch receiver showing. This hitch has 6,000 lb towing/400 lb tongue... view full answer...
The Curt Class III hitch you'd looked at, part # C13206 is a great choice and will work very well as a mounting point for hitch mounted accessories like bike racks or cargo carriers, as well as providing a towing capacity of up to 4000 lbs which would be limited to the 2700 lb towing capacity of the vehicle itself.
To complete your set-up, you'll also need a trailer wiring harness, part # 118467, a ball mount like # AMSC2 and a trailer ball. For a 1-7/8 inch ball, use # 19260 or # 63845... view full answer...
I recommend using the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT to install a 4-way flat trailer plug on your 1998 Subaru Legacy. This wiring harness will use sensors that will clamp over the factory taillight wiring. These sensors mean that you will not have to splice and risk overloading the wiring in your vehicle. The kit also includes a in line fuse to protect the system from overheating.
There is not currently a plug in wiring connection available for your Legacy. view full answer...
I believe you are looking for tire chains for the 8R19.5 size tires on your 1989 Airstream Motorhome. If this is the case the Pewag All Square Snow Tire Chains # PWE2214SC will work perfectly. These heavy-duty chains feature a nickel manganese alloy steel construction that will hold up great over time and the square links will provide excellent traction in the snow or ice.
Two chains are included in the kit. All pricing information is listed on the product page. view full answer...
The Curt Trailer Hitch Receiver part # C12270 is a confirmed fit for your 2004 Subaru Outback Wagon and it will work to pull a boat trailer. That said, you will need a few other parts to complete your setup which I have listed for you below.
Curt T-Connector Vehicle Wiring Harness part # C55370
Curt Drawbar part # C45519
Curt Pin and Clip part # F-4
Curt 1-7/8" Hitch Ball part # C40001
In regards to installation of the Curt Trailer Hitch Receiver, this is very simple to do yourself as... view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver # 76253 that you referenced is made overseas.
For a similar trailer hitch with the same hidden design we do have the Eco-Hitch # 306-X7381, which is confirmed to fit your 2019 Subaru Ascent and is made right here in the USA. The 2 inch receiver on this model will sit behind the factory knockout panel on the bumper (see attached image) and it features a 5,000 pound towing weight capacity. view full answer...
Thank you for the information and photos!
For your application I recommend going with the Thule WingBar Evo roof rack which consists of the following:
47" WingBar Evo Crossbars - # TH711220
Rapid Podium Feet - # TH460R
Fit Kit - # THKIT4063
Lock Core Kit - # TH450400
You will need to put the OEM crossbars on your 2019 Subaru Outback Wagon into the stored position and then the Thule fit kit will clamp onto them for fitment. You may need to offset them some but this setup is compatible... view full answer...
You'd first need to start with a 4-way like the Tekonsha kit part # 118467 and then convert it to a 7-way since 7-way kits are not available for your vehicle. If your trailer does not have brakes all you'd need is the part # 37185 and you'd be set. If instead you do have trailer brakes you'd need a brake controller to actuate them like the Brake EVN # TK63VR. And instead of the 37185 the part # ETBC7 which comes with all of the parts needed to install a brake controller as well. view full answer...
I recommend the Thule WingBar Evo roof rack for your 2024 Subaru Outback Wilderness. For this you will need the Crossbars # TH711320 and Feet # TH710401. I prefer this system as the crossbars use a 2-piece channel seal which allows you to easily add channel mounted accessories without having to pull out or trim the single piece seals.
The Thule One-Key System Lock Cylinders # TH450800 will provide you with 8 keyed alike lock cores. Four of these will be used to secure the roof rack to... view full answer...
Go To Results