Recommended Trailer Hitch & 7-Way Wiring For 2017 Subaru Outback

Question

Question:

I’m thinking of upgrading my suburu to a 2017 outback. Was recommended Type 3 hitch, equallizer setup for 6000 lb and 400 lb tongue weight, electric brakes and a wiring harness. Do you have what it need and how much? Who would you recommend i have install this. Thank you

asked by: Micki P

0

Expert Reply:

Okay, there's a lot to go over here, so let's get right to it with the best option for a hitch and 7-way for a 2017 Subaru Outback for you to tow your trailer. We'll start with the hitch:

- Curt Trailer Hitch Receiver # C13410

The reason I really like this hitch is because unlike other options, it does not require any drilling into the frame of your '17 Outback, and because it has a completely hidden design with only the hitch receiver showing. This hitch has 6,000 lb towing/400 lb tongue weight capacity (though please be sure to check the towing capacity of the Outback), but is not rated for use with a weight distribution system, which is the case for all hitches that fit a 2017 Outback.

For the trailer wiring, in order to add a 7-way so you can use a brake controller to control your trailer's electric brakes you'll need a 4-way and then a 7-way; the 4-way will plug into the 7-way and will control the lighting functions and the 7-way will be used for the brakes. Here is what you'll need:

- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467

- Universal Installation Kit for Trailer Brake Controller - 7-Way RV # ETBC7

- Brake Controller: Tekonsha Prodigy P3 # 90195

The P3 is great because it gives you the most consistently smooth braking, has a bright LCD screen that is very easy to read, and has continual diagnostic checks with safeguards to prevent battery drain or shorts. In regards to install, any local mechanic will be able to perform the install of the hitch and wiring without issue. You may just want to make a few calls to see who in your area has experience. The prices of each part can be found on their respective product pages.

expert reply by: Kyle S

0

Answer 1

The foam panel is in the bumper to help support the bumper panel as well as provide a cushion for the cover if there is a minor collision. Without the cushion the cover will tend to break or crack easier as it does not have the support needed. I…

view full answer...

Answer 2

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13410 and the Draw-Tite Max-Frame Trailer Hitch Receiver part #76227 is the manufacturer. They install the same way and offer the same weight capacities. Between the two there is no…

view full answer...

Answer 4

Both the Draw-Tite Max-Frame Trailer Hitch Receiver #75673 and the Curt Trailer Hitch Receiver #C13206 will require drilling to install on your 2017 Subaru Outback Wagon. It is only a 1-1/8" access hole though so it is pretty minimal. The reason…

view full answer...

Answer 5

We have had some other people have a bit of trouble with the re-installation of the bumper fascia when installing the Draw-Tite Trailer Hitch #76227 or Curt Trailer Hitch #C13410 on your 2017 Subaru Outback. What has been recommended to help resolve…

view full answer...

Answer 6

For your 2017 Subaru Outback Wagon I would recommend the mostly hidden Curt #C13410 which has great towing capacities and best ground clearance. Then for trailer wiring the Tekonsha kit part #118467 would be your best option as its the easiest to…

view full answer...

Answer 7

The Curt Trailer Hitch Receiver part #C13410 is an excellent option for a 2017 Subaru Outback Wagon. It will pair perfectly with the T-One Vehicle Wiring Harness part #118467 which is what I recommend. The trailer wiring harness options all do the…

view full answer...

Answer 8

The best trailer hitch we have available for your 2019 Subaru Outback Wagon is the Curt Class III #C13410 because of its hidden crosstube design and superior black powder coat finish. The hidden design means only the 2" receiver is visible from…

view full answer...

Answer 9

Since any towing system will be limited by the capacity of the lowest rated component, you'll be limited to the 200 lb tongue weight capacity of the vehicle, even though the Curt #C13410 hitch itself has a 600 lb capacity. I couldn't speak to…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Recommended Trailer Hitch & 7-Way Wiring For 2017 Subaru Outback

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching