The LED Adjustable Reading Light for RVs come in silver part # CE46FR and black part # CE66FR but these are the only color options. view full answer...
Minus packaging, the Draw-Tite # 75673 Class III trailer hitch weighs about 32 lbs, and is a confirmed fit for your 2013 Subaru Outback Wagon. You might consider the less expensive Curt # C13410 Class IIl as well. The Curt hitch features a concealed design that hides the hitch crossbar behind the bumper for a cleaner appearance. I've linked to install video for both hitches, so you can compare what both hitches look like once they're installed. The Curt hitch weighs about 5 lbs less than... view full answer...
The # FM-003-W NightMinder LED Night Light powered by household A/C current, which is usually 120V. Although we don't have a 12V version, we do have a battery powered motion detector lamp, part # NM-Motion-011 that could serve that purpose by providing illumination if you need to mover around in the middle of the night. view full answer...
In regards to the bearings, trailer bearings nowadays are generally made overseas; there may be some exceptions here and there, but they generally aren't standard trailer bearings. The bearings and seals that come with the HydraStar Disc Brake Kit with Actuator for Tandem Axle Trailers # HSE7K-T1 are of the highest quality and you won't have any issues.
As far as changing from grease to oil bath, that is not recommended for trailer hubs. Oil bath hubs can be problematic because they are... view full answer...
The mower-specific bracket is included with the # RCMMS4-EXS1 catcher. This particular catcher fits Toro lawn mowers with a regular deck, Exmark lawn mowers with 4" discharge opening and Bobcat lawn mowers with a regular deck. I've linked to a product demonstration and a description video. view full answer...
Our usual source for flat towing procedures for a given vehicle did not have any information about dolly towing a first generation RAV4, due to the age of the vehicle. However, Roadmaster was able to provide me with some general information. If the vehicle is front wheel drive (FWD), it can be dolly towed. If it is rear wheel (RWD) or all-wheel drive, (AWD) it cannot be dolly towed.
I would recommend checking with your Toyota dealer to see if they have any recommendations. view full answer...
A vehicle base plate for a tow bar is a vehicle-specific item that is designed and engineered to fit on a particular vehicle. Although it might be theoretically possible to modify a base plate so that it fits a vehicle other than the one it was designed for, I cannot in any way recommend doing so. The geometry of the front of the Terrain and the F150 are different enough that I highly doubt it would even be possible. Keep in mind that altering a base plate assembly in any way will void... view full answer...
In a nutshell, the height of your trailer is what will determine your need for clearance lights. The length of the trailer is what determines whether or not marker lights are needed, and the trailer width will determine if an extra set of tail lights are necessary.
These regulations can vary from state to state, so you will need to check with your state Department of Transportation for what your particular state requires. view full answer...
The Hopkins Rear View Camera, part # HM60195VA is a wired camera. The range of the camera would be limited by the length of the cable that connects the camera and the monitor, which is 19.7 inches long.
A better option is the Swift Hitch camera, # 04928, becuase it does transmit wirlessly up to 300 fee. view full answer...
The Secure-Fill RV Fresh Water Tank Filler w/ Shutoff part # A01-0035VP is not lead free as most brass fittings are not but it is below the minimum requirement needed to pass the Safe Drinking Water Act (SDWA) so it is safe to use for drinking water. view full answer...
I reached out to the manufacturer who told me the K-Source Replacement Side Mirror - Electric/Heat w Signal - Black - Driver Side # KS65028Y and Passenger Side # KS65027Y that fit your 2017 Hyundai Santa Fe Sport "do not have a puddle lamp. They are heated power with turn signal only." view full answer...
I spoke with Hopkins and they told me the Hopkins Endurance Easy-Pull Harness part # HM38136 has a 16 gauge wire for the ground and then 18 gauge for the stop/turn and running light. The correct matching side for the vehicle is the Hopkins Endurance Easy-Pull Harness part # HM48058. view full answer...
The Electric Jack w/ Footplate part # EJ-3520-BBX has a max amp draw rating of 30 but it could vary based on how much tongue weight it is lifting at any given time. view full answer...
The cable and hitch lock that's compatible with the RockyMounts # RKY10223 WestSlope bike rack are available separately as part # RKY10224.
The WestSlope bike rack is one of my favorite designs, primarily because the U-shaped rack allows you to step in closer to the rear of the vehicle which makes in easy to load the bikes that are closest to the vehicle.
I've linked to description videos for both the bike rack and the lock kit I recommended. view full answer...
The Thinline Opti-Brite LED Interior Strip Light, part # ILL71CB has an effective output of 342.
This lights features 18 diodes and measures 15-3/4 inches long x 1 inch wide x 5/8 inches thick. view full answer...
The typical installation of the Erickson Horizontal E-Track, part # E19148 is by installing bolts or screws through the mounting holes on the track system.
It can be welded, but specific precautions should be used when doing so as this is a zinc-coated steel and welding produces dangerous fumes. It should always be done in a ventilated area.
In my research I found that the zinc coating has a lower melting point at 1,600 degrees F versus steel at 2,800 degrees F, and if not removed before... view full answer...
The Roadmaster tow dolly # RM-2050-1 does have a license plate bracket but the rules for what needs to be licensed and registered is going to depend on the state you are in. You will need to call your local DMV to inquire. Most likely it will NOT have to be licensed and registered like a trailer. view full answer...
The design of the Airaid Throttle Body Spacer, part # AR200-630-1 is to increase engine torque and horsepower while improving fuel efficiency.
The design of the bore causes air to tumble and spin which increases the velocity which leads to more power.
We have received reviews from folks after installing the spacer and they said they have seen positive results. I recommend checking with your GM dealership to see if they have had any issues or comments from people using this on an SUV... view full answer...
The Tekonsha ZCI # 119250KIT is a passive device, that only reads the signal going through the vehicle's taillight wiring harness. It won't actually affect or interfere with those signals.
I've linked to an installation video showing the wiring harness being installed on a similar vehicle. The wire colors on your GL550 might be different than those shown in the video, but you'll get a good idea of how to identify which circuit serves which lighting function. view full answer...