Expert Answers about Nissan Versa fit

Expert Answers about Nissan Versa

Will the Roadmaster Bulb and SOcket Tow Bar Wiring Kit Fit a 2011 Nissan Versa Hatchback
We have not had anyone come to us with specific problems related to a 2011 Nissan Versa hatchback and tow bar wiring kit # RM-155. There are some things about the bulb and socket kit that you need to be aware of. There is drilling involved with the installation of this kit. You have to drill into the back of the tail light housing to mount the bulbs. There needs to be enough space inside the housing for the bulbs to fit without melting the tail light lens. There needs to be 1/4 inch of...
view full answer...

Lightweight, Economical Trunk Mount Bike Rack for a 2016 Nissan Versa with Factory Spoiler
For a trunk mount bike rack confirmed to work with the factory spoiler on your 2016 Nissan Versa, I recommend taking a look at the Thule Passage 2 Bike Carrier part # TH910XT. As you can see in the attached video on a similar 2016 Nissan Versa, the bike rack is extremely easy to use and holds up well on the road. The Thule Passage 2 also only weighs about 12 lbs making it extremely lightweight and easy to install. All you need to do to install the bike on the rack is loosen two cradle...
view full answer...

Is the Kuat Sherpa 2.0 a good fit for 2019 Versa Note?
For your 2019 Nissan Versa Note, I recommend starting with the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11378 you referenced. This hitch has a 4 inch measurement from the hitch pin hole to the outermost part of the bumper. The Kuat Sherpa 2.0 2-Bike Platform Rack - 1-1/4" Hitches - Tilting - Black # SH12B will be compatible. I personally like the Kuat Sherpa because of the wheel mounted hooks for no frame contact and a little more clearance from your bumper.
view full answer...

Are Trunk Mounted Bike Racks Available to Fit my 2013 Nissan Versa Sedan
I have attached a link to all of the truck mounted bike racks that have been confirmed to fit a 2013 Nissan Versa. You will just need to select the vehicle style to see the options that are available for your sedan. As for the book at the local dealer, we do not have, make, or print any type of book that is sent to dealers. You may have been looking at an outdated book from a specific bike rack manufacturer. Regarding the information on our site, it has been directly obtained from the...
view full answer...

Recommended Trailer Hitch for a 2012 Nissan Versa Hatchback
Yes, the Draw-Tite hitch item # 24798 will fit your 2012 Nissan Versa if you have the 5-door hatch back model. This hitch is custom fit and bolts directly to your Nissan with included hardware. You will also need a wiring harness to control your boat trailer's lights. The Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118545 fits the hatchback model. For a ball mount you'd need the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for...
view full answer...

Why Does 2011 Nissan Versa Sedan Have Exhaust on the Right Side and Hitches Are Made for Left Side
My technical contact at Draw-Tite informed me that Nissan had a design change for the 2012 model year that entailed moving the exhaust from the left to the right on the sedan models such as yours. If you check your VIN, your 2011 Versa 4 Door Sedan was probably built on the cusp and they built it as a 2012 instead of the 2011. The hitches that fit the 2012 sedans actually go over the exhaust and the exhaust needs to be temporarily lowered for trailer hitch installation. The Curt Trailer...
view full answer...

Do all of the Hitches for the 2009 Nissan Versa Fit Both the Hatchback and Sedan
All of the hitches listed for the 2009 Nissan Versa (see link) will fit both the sedan and hatchback. Some items you may need to complete your towing setup with a Class I hitch are listed below. Drawbar # 3593 Pin and Clip # PC2 Wiring # C59496 Hitch Ball # 19256 or # 19258 Hitch Lock # e98879
view full answer...

Will Curt T-Connector Trailer Wiring Harness Fit a 2008 Nissan Versa Hatchback
Yes the Curt trailer wiring harness # C56021 is listed as a fit for all models of the 2008 Nissan Versa including the hatchback. I have included a link to the installation instructions for you.
view full answer...

Roof Rack for Nissan Versa 2007 Hatchback
I recommend looking into a CUSTOM fit roof rack like the Rhino Rack 2500 Series roof rack with Vortex Aero Crossbars. This rack consists of parts # RRVA118B-2, # RRRLKVA, and # DK047. If price is your main concern the SportRack Semi-Custom Roof Rack for Naked Roofs # SR1002 will be your best option. This is the most economical roof rack offered for your 2007 Versa hatchback. Keep in mind, this is a semi-custom roof rack, so it was designed to fit your Versa, along with several other vehicles....
view full answer...

Cargo Carrier That Will Fit a 42" Long by 31" Wide Trike
Given the dimensions you mentioned I think you are referring to a cargo carrier rather than an actual trailer. We do have a couple options for you. The 32x48 Reese Solo Cargo Carrier # PS1040100 or the 32x48 Reese Steel Solo Cargo Carrier # PS10401-10402 if you want a ramp to make loading your trike easier. Both of these are 32" wide and 48" long.
view full answer...

Compatibility of Curt Class I Hitch on 2010 Nissan Versa with Mobility Scooter Carrier
A Class I hitch, including the Curt # C11348 that would fit on your 2010 Nissan Versa has a relatively low tongue weight capacity of 200 lbs. The tongue weight capacity represents the maximum amount of weight that can be safely hung from the hitch. This means that your Harmar AL 160 Profile Scooter Lift plus the weight of the scooter itself could weigh no more than 200 lbs. Exceeding that weight limit could cause the hitch to bend or the hitch attachments to the vehicle to fail, which...
view full answer...

Floor Mat Recommendation For 2013 Nissan Versa Hatchback With Automatic Transmission
You are correct. The WeatherTech Front Auto Floor Mats, part # WT461681, are indeed a fit for your 2013 Nissan Versa Hatchback, as long as it does not have a manual transmission. This includes both the driver and passenger contoured mats designed to be a perfect fit for your Versa.
view full answer...

Roof Rack Recommendation For 2014 Nissan Versa Note
There are some Rhino-Rack roof racks that fit your 2014 Nissan Versa. The nicest are part # RR98GR in black. I like these racks because the bars don't stick out the sides of Versa for a nice, clean, factory look. The kit comes with everything you need to install except a measuring tape.
view full answer...

Will Hollywood Racks Express Trunk Rack fit a 2008 Nissan Versa Hatchback
Yes, the Hollywood Rack trunk rack part # HRE3 that you referenced has been confirmed as a fit for your hatchback 2008 Nissan Versa. We haven't had the chance to install it on your specific vehicle and that is why we don't have a picture or a video that shows it on your vehicle. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Kuat Bike Frame Adapter Bar # UB01 to provide a horizontal top tube on your...
view full answer...

Fit of Rhino Rack 2500 Series Roof Rack on 2007 Nissan Versa 5-Door Hatchback
The Rhino Rack 2500 Series roof rack with Aero Crossbars, which consists of parts # RRVA118B-2, # RRRLKVA, and # DK047 is indeed a fit for your 2007 Nissan Versa. If you don't already have a carrier, Yakima offers their JayLow, part # Y04073, which would allow you to carry up to two kayaks. The JayLow includes straps for securing one kayak to the carrier, as well as bow and stern tie-downs. For a second set use part # Y04031. Thule offers the Hood Loops, part # TH529 which can be closed...
view full answer...

Recommended Hitch for a 2008 Nissan Versa Hatchback and Where to Get it Installed
The best hitch for your 2008 Nissan Versa Hatchback is going to be the Curt Trailer Hitch item # C11348 you were looking at. To get it installed you will want to scroll down the left side of the hitches product page and go below the pictures and videos. You will see a blue link that says Locate installers near me. Go ahead and click on this and put in your zip code and you will find a list of reputable installers near you. This is the highest capacity hitch available for your car. There...
view full answer...

Recommended Parts to Flat Tow a 2021 Nissan Versa
There's two different options to tow your 2021 Versa. If you have an automatic transmission it can't be flat towed and the only way to haul it behind an RV is to use a trailer or a dolly like the Roadmaster Tow Dolly with Electric Brakes item # RM-2050-1. If your 2021 Versa has a manual transmission you will need the parts listed below: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable...
view full answer...

Will Draw-Tite Trailer Hitch # 24798 Fit a 2012 Nissan Versa Hatchback
Yes, the Draw-Tite trailer hitch # 24798 will fit the 2012 Nissan Versa Hatchback. I have included a link to the installation details for you to view. If your daughter plans on doing some towing, the correct ball mount is # 3593 and you can use pin and clip # PC2. For a 1-7/8 inch diameter ball, use # 19256, and for a 2 inch diameter ball use # 19258. For trailer wiring use # 118545.
view full answer...

Fit of Curt Class I C11256 Trailer Hitch on 2012 Nissan Tiida
According to Curt, their Class I trailer hitch, part # C11256 is designed to fit the North American market 2012 Nissan Versa. The fit of the hitch hasn't been tested on a Nissan Tiida. According to my research, it's the same vehicle but it's not clear if the rear structure of the vehicles are identical. Look under the rear bumper, and find the holes in the frame mebers that serve as the hitch attachment holes. If these holes are 37-1/4 inches apart, center hole to center hole, then the...
view full answer...

Will Upgraded Circuit Protected Converter Part Work With Trailers with LED Lights
The portion of the product description you are referring to states that the trailer converter and wiring, part # 119178, should not be used with vehicles that are equipped with LED lights. Trailers equipped with LED lights are fine. Part # 119178 is fine for both your Altima and Versa as long as they are not equipped with LED tail lights and blinkers. The reason why it should not used with LED vehicle lights is because LEDs use much less current than incandescent bulbs. LEDs are new to...
view full answer...