The Extang Tuff Tonno soft tonneau cover that fits your 2008 Nissan Frontier with 6-foot bed is cover # EX14995 and the replacement tarp part is # EX13995. You'll notice that the whole cover and tarp parts share a few common digits.
The leading digit "8" is left off the Extang part number here at etrailer when we add the Extang brand prefix "EX". This is the right part and Extang informed you correctly. view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75282 has 6 Hex Bolts size M12 x 1.25 x 35mm according to the instructions along with 6 flat washers and 6 lock washers to fit in the existing weld nuts. I've attached the installation details so you can torque to specs. If you don't have a torque wrench, I recommend # ALL944001. view full answer...
The T-Rac TracRac ladder rack you have was made by TracRac before they were aquired by Thule in 2010. Currently Thule does not have any replacement parts which will allow you to attach this ladder rack to your truck. Their current version of the TracRac # TH43001XT-600 uses a bolt on style rail the uprights can slide forward and back on. You may be able to find some of the older rails and have them modified to fit your truck, otherwise you will need to have some custom fabricated rails... view full answer...
Finding a replacement cover only for a Tonneau cover is actually easier than you'd think on our site. Basically, if there is a replacement available, it will appear as a replacement part on the product page for that Tonneau cover.
For TruXedo TruXport Tonneau cover # TX284101 the correct replacement cover only is # TX2841-CVR. view full answer...
You can trim your current Breakaway Cable # HM20012 and fasten a new loop as long as you ensure it is long enough to not activate the brakes when you are turning your trailer. You will need to ensure that the repair is strong enough and that the remaining portion of the cable is still in good condition.
I recommend replacing the cable with either the Fastway Zip Coiled Trailer Breakaway Cable # FA80-01-2140 or replacing the entire switch with the Fastway Zip Trailer Breakaway Switch with... view full answer...
The replacement Extang Tonneau Cover for your 2005 Nissan Frontier King Cab with the 6 ft bed is part # EX13995.
This cover fits 2005 through 2015 Nissan Frontier and replaces the cover for the Extang Tuff Tonno Soft Tonneau Cover, part # EX14995. view full answer...
Yes, the adapter clamps that are used to secure the Extang Trifecta 2.0 Tonneau Cover # EX92985 to the Utili Track on your 2018 Nissan Frontier can be found with part # EX2244-0204. This includes all 4 clamps needed for installation.
If you can tell me what model tonneau cover you have I will be happy to verify if these will work. view full answer...
We do have Curt hitches that fit your 2004 Nissan Frontier but the 13900 is not one of them. Instead you'd want the # 13841 for if you have a short bed or the # 13842 for if you have a long bed. I confirmed with Curt these fit your truck and do not require any drilling. view full answer...
Appreciate that info, and the correct replacement tarp for your 2005 Nissan Frontier with a 6 foot bed and the TruXedo TruXport Soft, Roll-Up Tonneau Cover # TX284101 is the following part number:
- Replacement Tarp for TruXedo TruXport Soft, Roll-up Tonneau Cover # TX2841-CVR view full answer...
I'm fairly certain Nissan would offer a replacement, but I'm not aware of the OEM part number. We do offer an aftermarket replacement that would work great for you.
The Tow Ready # 118267 is the correct replacement 7-way trailer connector for your 2016 Nissan Frontier. If the 7-way connector was broken, I'm guessing you'll need another mounting bracket as well. We offer a replacement bracket as part # PK12711U.
If you click the provided link, you'll see a video where my buddy Randy will... view full answer...
We do have just the replacement air spring of the Ride Control # AL59561 with the part number # AL50254 although we can't guarantee this would fit your 1999 Nissan Frontier. view full answer...
I do not know of a way to check a relay and see if it is good other than to use a new relay in the wiring.
For your 2008 Frontier, a wiring harness like part # C56225 uses three relays, so it could be any one of the three has possibly gone bad.
We do offer the Curt Relay kit # C57000. This kit includes the two smaller Blue relays and the larger Brown relay. view full answer...
Unfortunately, I don't have any reference material that would show me what grease seal your Coleman Bayside pop-up camper uses.
From my research, it appears your camper uses a 3500 lb axle. If you can provide me more information, I can determine which grease seal you'll need. I'll need to know:
Inner bearing reference number stamped on bearing cage
Diameter of inner hub bore
Diameter of spindle journal surface where grease seal rides
The measurements need to be highly accurate, you'll... view full answer...
The part # 118267 wiring harness is designed to replace a damaged or broken 7-way wiring harness part # 118266.
This harness does not include the relays that are needed to activate the tow package on your Frontier. If this is not being used as a replacement, you will need part # 118266 harness that includes the relays. view full answer...
The correct replacement tarp for the Extang BlackMax Soft Tonneau Cover part # EX2995 you have on your 2007 Nissan Frontier with the 6' bed is the Replacement Tarp for Extang BlackMax Soft Tonneau Cover part # EX1995. view full answer...
The correct replacement strip for your Access Vanish Soft, Roll-Up Tonneau Cover # 834532007950 on your 2017 Nissan Frontier can be found as part # A60270. This measures 1" wide and 17' long so it should be more than enough for your 6' bed. view full answer...
The best way to determine which tarp fits on which model bed is by finding the model cover you have on your truck and then checking the "Related Parts" tab; usually the replacement tarps will be listed in that section. The Replacement Tarp # EX1915 you were looking at is designed to fit on the Extang BlackMax model 2915 for a Toyota Tacoma with a 6 foot bed and based off the information provided it looks like you're looking for a replacement tarp on a 2010 Nissan Frontier.
I've listed... view full answer...
The Thule One-Key System Lock Cylinders # TH450400 will work to replace the lock cylinders on your Thule Truck Bed Ladder Rack. The One-Key System will work with any lock cylinder that starts with a "E" or "N". So your N112 cylinders can be replaced with the One-Key System. A Universal Control Key that is used to remove and install lock cylinders is included with the kit.
You could also purchase replacement keys since you know your lock. You would want Replacement Key for Thule Racks and... view full answer...