Ultra Bright LED Flood Light - 3,120 Lumens - Black Aluminum - Clear Lens - 12V/24V

Video Transcript for Review of Buyers Products Lights - Utility/Work Lights - 3371492128

Today we're going to take a look at the Buyers Products LED work light. Now this is going to be a very bright light to illuminate any area that you need. The nice thing about this being an LED light is that's it's going to be a much more efficient light than your typical incandescent bulb. Since we don't have any bulbs to replace, there's no filaments that can burst. There's pretty much no maintenance required with this light. It's also going to be much more efficient and last a longer time with less power output.

Our housing is going to be made of a durable aluminum. And then as you can see there's these fins on the back that helps to dissipate any heat that builds up from our lights when they're on for a long time. There can maybe be a little bit of heat buildup. This is going to allow air to get in and keep that light cool so again, it's going to keep our LEDs working for a long time.Now this is going to have a flood beam design so it's going to illuminate a wide area and reach up to 187 feet. It's going to be great for any application on a vehicle if your have an agricultural or industrial use for it.

If you need to put it on your work truck, maybe your salt spreader, snow plow or any kind of other utility vehicle. Really anywhere that you need this inaudible 00:01:11 mounted up it can go since it's a pretty low profile for as bright a light as it is. And this is compatible with 12 volt DC and 24 volt DC systems. As far as installing it, there's going to be this welded on bracket at the bottom. It's part of the light housing itself.

Has some little teeth on it to grip onto our included bracket and we'll also get the hardware to attach this bracket to our light and then to attach the bracket to wherever we chose to mount this up.So basically you'll want to thread the first bolt on because once you have this bracket in place, there's not enough room to get that bolt on and then you'll have your split lock washer and a nut. So you can put that in place and then mount that to your light with that longer, skinnier bolt flying through the end there, lock washer and nut again. So you might need to drill a hole out to accommodate out for that larger bolt to get that mounted up. But once you have a place where that harbor can go, it's pretty easy to install as you can see. Now as far as how our light looks when it's illuminate, I'll go ahead and turn it on.

It's going to be very bright.So as you can see that's going to be a really powerful bright light. Even pulling it back away by about three or four feet, still lighting up my hand pretty well. Go ahead and turn the lights out in the studio so you can get a better idea of just how bright that's going to be. As you can see, lights up my hand really well. I've got it pulled back about as far as my arm will reach here and it's still really bright. So a nice wide beam, very bright, white light. So it'll do a great job of illuminating any work area that you have, even if you're working at night or in any other low light situation.Now on the back we will have our 18 inch long power lead. It's going to have two wires, one for power, one for ground. Black wire is going to be our ground, red wire will be for power. And as far as our dimensions on the light itself, it's going to be about four and a quarter inches wide, and going from the top of our light out to where it would meet our bracket, it's going to be about five and seven sixteenths tall. And then going from front to back it'll be one and fifteen sixteenths inches thick. We'll have 16 diodes in all and this is going to have a light output of 3,120 lumens. So all in al, nice well built light. It's going to give you plenty of illumination for any job that you might have for it. The wattage is going to be 46 watts, our power draw at 12 volts is going to be 2.0 amps, or 2.08 amps. And this has a five year warranty from Buyer's. And that's going to do it for our look at the Buyers Products LED work light.