The trailer wiring harness option for a 2022 Hyundai Palisade utilized a tow package port under the vehicle. The trailer wiring harness option for a 2023 Hyundai Palisade dos not utilize a tow package port under the vehicle therefore must plug in behind the tail lights. I recommend the Curt T-Connector Vehicle Wiring Harness # C43FV for this. In regards to the power wire, this needed to prevent drain on the vehicle's factory tail light circuits which can't handle the extra load from the... view full answer...
For a trailer hitch I recommend going with the etrailer Trailer Hitch Receiver # e95ZR because it will have a hidden crosstube and the matte black finish will hide scratches from road debris while matching any black trim you might have on your 2022 Hyundai Palisade.
Then for a 4-bike rack I really like the Thule Apex XT # TH9025XT. This has upgraded easy-to-use features and includes locks for both the rack and your bikes to give you some peace of mind. Please note that if any of your bikes... view full answer...
The Curt Echo Mobile Brake Controller # C51180 does not have to be level to function. If your application would put it at an angle it would work just fine. view full answer...
I would be happy to recommend a trailer hitch receiver and 4 bike rack for your 2020 Hyundai Palisade!
Starting with the trailer hitch receiver I recommend Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13427 due to it having the highest tongue weight rating at 750lbs. While your Palisade may not be rated for this much tongue weight, it is nice to know that the receiver on your vehicle can handle anything you can throw at it with ease.
Moving on to the bike rack I recommend... view full answer...
In regards to the wiring for your 2023 Hyundai Palisade, you'll need to go with a hardwire harness like the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part # C59236. Then, you'll need an adapter, the 4 to 7-Way with 4-Wat part # ETBC7L which is designed specifically for the Curt Echo Wireless Brake Controller part # C51180.
Unfortunately, there are no plug-in options for your vehicle currently as there is still an on-going issue on the manufacturing side of things... view full answer...
Since you need a 5-way trailer wiring connector for your 2021 Hyundai Palisade you'd want the Stealth hitch part # 391HYUNPALIS19T which comes with the ball mount attachment as well as a 4-way connector.
Then to convert it to a 5-way you'd need the part # C57187. This plugs into the 4-way and then you'd run the extra wire to the reverse light circuit and you'd be set.
The converter box of the Stealth kit does need to run to the vehicle battery to complete the circuit protection and... view full answer...
Currently (Oct 2021) there is not a custom 7-way RV harness available for the 2022 Hyundai Palisade, therefore you will need to use the Universal Installation Kit for Trailer Brake Controller, # ETBC7. This kit includes everything you need to install an electric trailer brake controller and 7-way connector by upgrading the already present 4-way flat connector. If you do not currently have a 4-pole flat connector in place, I suggest the Curt T-Connector Vehicle Wiring Harness, # CU94FR.... view full answer...
Your 2023 Hyundai Palisade can use the Curt trailer wiring connector part # CU94FR which is a simple plug in install. To convert to a 7-way you would want the part # 37185 though as we do not have a direct plug 7-way kit. The Curt does not require a 12 volt power wire to run up to the battery either. view full answer...
For using a bike rack on your 2021 Hyundai Palisade the wiring harness is not a requirement. I do encourage the installation of the Wiring Harness # CU94FR so that if you need to add some Curt Auxiliary Lights # C53201 due to the bikes blocking your taillights you do have the option.
When installing the Curt Trailer Hitch Receiver # C13427 if you choose to also install the Wiring Harness # CU94FR, you can use the Mounting Brackets # 18144 and # C57202 to secure the plug to your hitch. view full answer...
We had the chance to install the Curt hitch part # C13427 on a 2022 Hyundai Palisade like yours and we were able to keep the spare underneath it like you can see in the attached picture and install video. view full answer...
I would be happy to help!
There are a multitude of different weight distribution hitches that will work with the etrailer Trailer Hitch Receiver # e95ZR you ordered for your 2021 Hyundai Palisade, but to find the correct option you will need to determine the total tongue weight of your setup.
Total tongue weight is the tongue weight of your fully loaded and ready to tow trailer plus the weight of any cargo behind the rear axle of your Palisade. Using a tongue weight scale like the etrailer... view full answer...
For a 4-way to 7-way adapter that has a built in circuit tester you'd want the Curt # C57674 which would only need to plug into the 4-way you have on your 2022 Hyundai Palisade. view full answer...
I have another option, but at this time there is not an OEM or aftermarket harness offered to add a 7-way connector to your 2021 Hyundai Palisade.
Instead, you will need to install a 4-way connector like the Curt T-Connector Vehicle Wiring Harness # CU94R, and then use the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation # ETBC7L which was designed for the Curt Echo Wireless Trailer Brake Controller # C51180 you were looking at.
I included videos for each of the products... view full answer...
For your 2020 Hyundai Palisade Limited edition you will need a wiring kit to transfer the light signals to your trailer, the pre-wiring provides a plug for the trailer wiring to hook up. I recommend Curt T-Connector Vehicle Wiring Harness # CU94FR. It provides a 4 way flat trailer connector and hooks directly into the tow package plug on the underside of your Palisade. It is a 1 piece, or 1 end connector, however there are adapters that will allow you to have both a 7 and 4 way like your... view full answer...
The best option we have right now (August 2019) is for you to install the 4-way on your 2020 Hyundai Palisade from Hyundai as we don't have an option yet, and then convert it to a 7-way with the part # ETBC7 which comes with everything needed to install a brake controller and convert the 4-way to a 7-way.
For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup.... view full answer...
For your 2022 Hyundai Palisade, I recommend going with the etrailer.com Class III Hitch # e95ZR. This American made hitch is a direct bolt on application that requires no drilling for the install and will have a mostly hidden look once completed (picture included). This will also be rated up to 5,000 pounds towing and 750 pounds of tongue weight, though you will need to check your owner's manual for the max capacities of your vehicle. With that said, you will have absolutely no problem... view full answer...
The only custom fit trailer wiring kit we have for your 2023 Hyundai Palisade is the Curt kit part # C43FV which plugs inline with the taillight connectors of the vehicle. We do not have anything that installs to a connector found in the trunk pan area like you mentioned. view full answer...
Yes, you are correct that the etrailer Trailer Hitch Receiver, # e95ZR will fit your 2022 Hyundai Palisade. This is a great choice and one that I recommend. This is a Class III hitch with a maximum gross trailer weight of 5,000 lbs. and a max GTW when used with weight distribution: 6,000 lbs. The max tongue weight is 750 lbs. with or without a WDS.
As for a weight distribution system, the correct choice is determined by the total tongue weight of your setup. Total tongue weight being... view full answer...
I spoke with Stealth about the Stealth Hitches Hidden Trailer Hitch Receiver part # 391HYUNPALIS19T for a 2020 Hyundai Palisade and they informed me that due to the extended ball mount that this vehicle uses, there are no options to lower the hitch ball height. That said, we may be able to help you raise the trailer if that is something you're interested in. If so, simply provide the axle style (torsion/leaf spring) and details such as make and leaf spring orientation if applicable. view full answer...
Although we don't offer a roof rack option that would provide the side rails, we do offer roof rack options that would work for your 2020 Hyundai Palisade.
For a Yakima round bar roof rack, you'd need the following parts:
• Yakima 58 inch round crossbars, part # Y00409
• Yakima BaseLine Towers, part # Y28TR
• Yakima SL Adapters, part # Y03536
• Yakima Base Clips # Y06145
• Yakima Base Clips # Y06138
You might want to consider going with an aero-style crossbar, however. The round bars... view full answer...
Go To Results