The Demco Hijacker Autoslide 18K 5th Wheel Trailer Hitch part # DM8550034 weighs about 275 lbs and the Demco Hijacker Autoslide 21K 5th Wheel Trailer Hitch part # DM8550035 weighs about 300 lbs. view full answer...
I spoke with Lippert but they were not able to provide much information on the color of the under side of the last step on the Alumi-Tread Manual Pull-Out Step part # LC432698. That said, I searched our reviews and the most recent ones show the underside of the last step being black.
There would not appear to have been any notable design changes. view full answer...
Jameson's wording could've been better but what he meant was that there isn't any way to adjust the connection point of the Curt CrossWing Lightweight # C92DR since it only allows for you to raise of lower the hitch head. In the question he was asked the neighbor referred to the Andersen hitch and talked about moving it a specific way to allow for more turning clearance. The # C92DR can only be mounted one way and doesn't offer adjustability.
Per Curt's website, the CrossWing has 8.4"... view full answer...
I have a great ladder rack option for your 2022 GMC Sierra 2500 with standard bed and no cover. The Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501150 is a great option for a work truck. This ladder rack is an over-the-cab ladder rack with removable rear crossbar that lets you carry ladders and lumber on the rack while hauling appliances and furniture in your truck bed. It also features raised side rails that provide load support for your cargo and multiple cutouts that can... view full answer...
No, installing the MagnaFlow 4" Exhaust Tip # MF35181 would not void the warranty on your 2016 GMC Sierra 2500. If you are concerned because it is a weld-on then you could use # MF35187 if your existing exhaust pipe is a 4 inch. This one is a clamp-on. view full answer...
To get extra clearance towing your fifth wheel trailer with a gooseneck hitch in your truck is to use an adapter like part # CAB-C5GX1216. This adapter bolts to your fifth wheel king pin and connects to the gooseneck ball.
Another option is to swap out your pin box and use a Goose Box. You just need to know what the make and model of your king pin is. Then check out the attached link for the Goose Boxes we offer. Or you can let me know what pin box you have and I will make a recommendation... view full answer...
Great question!
Ford, GM and Ram use a similar nomenclature for their full-size trucks.
• For GM and Ram, 1500 is a 1/2 ton, 2500 is a 3/4 ton and 3500 is a 1 ton.
• For Ford trucks, the F-150 is a 1/2 ton, the F-250 is a 3/4 ton and the F-350 is a 1 ton truck.
You have a 3/4 ton truck. view full answer...
Yes, it does sound correct; you can use the pin weight calculation for the psi of the Air Lift LoadLifter 7500 XL Air Helper Springs # AL57541 on your 2020 GMC Sierra 2500.
That said, it doesn't have to be that exact, and you can use your calculations more as a baseline if you like. You can test it out using that air pressure as sort of a starting point, and adjust from there. If you go to 31 psi and your truck is level with the full pin weight then awesome, you're set. But if you're... view full answer...
The TracRac Sr ladder rack that is designed to fit your Sierra 2500 if it has a 6-1/2 ft bed is part #TH43002XT-781. If you have an 8-ft bed on your truck then part # TH43002XT-780 is what you need.
We do not offer shorter uprights that will fit in the base rails of the ladder rack. The height of the crossbars with the base rails is 27-5/16 inches.
Another possibility is the Thule Xsporter Ladder Rack, part # TH500XT. This does not have the sliding feature but it is height adjustable... view full answer...
While I can give you the height of the Thule roof rack above the roof of your 2023 GMC Sierra 2500, I don't know how much height the cantilever of the ladder rack adds, so you'll need to measure how high above your roof it is and compare that with the Thule roof rack.
For the rack, from the roof of your '23 GMC Sierra 2500 to the top of the crossbar you'll be adding 5-1/2 inches when it is installed, so that should tell you if the height is approximately the same or not. The parts that... view full answer...
You are correct that when you install the HydraStar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness # HS381-9067 your 2015 GMC Sierra 2500HD Diesel will need the HydraStar Electric Over Hydraulic Actuator Adapter Module # HBA-CAM.
The HydraStar Electric Over Hydraulic Actuator Adapter Module # HBA-CAM takes the brake signal from your Sierra and uses it to apply the brakes properly on the trailer. It also tells the truck that everything is braking as it should... view full answer...
The B&W # BWRVK2505 base rails are a medium gray, the same color as their fifth wheel and Turnover Ball gooseneck hitches. If you click the provided video link, you can get a better idea of the color which doesn't show up too prominently in the product description photos. view full answer...
The Curt Front Mount Trailer Hitch Receiver # C52NR does have a gloss black powder coat finish. This is confirmed to fit your 2024 GMC Sierra 2500. view full answer...
The best option for you to gain clearance is not technically a lift kit, but what is called an over/under conversion kit, which moves your trailer's leaf springs to the top of your axle and lifts your trailer approximately the same amount as your axle's diameter plus the height of the leaf spring pack (please keep in mind this conversion kit is for use with double-eye springs only).
- 2-3/8" Round Axle: Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00
- 3" Round Axle: Dexter... view full answer...
Adding Air Lift LoadLifter 7500 XL Air Helper Springs # AL57541 to your 2022 GMC Sierra 2500 will improve your ride quality by reducing sag and adding stability. It will not increase your payload or towing capabilities. You should never exceed any limitations put out by the manufacturer unless they are the ones modifying your truck to gain additional capacity.
The Air Lift WirelessAIR Compressor System # AL74000EZ will allow you to control the air pressure in each air spring individually.... view full answer...
A larger controller with an overage buffer is not something that is available for the Go Power Solar Extreme Charging System - 570 Watt Solar Panels - 3,000 Watt Inverter Charger # 34282185.
It is also not needed because the controller on this system is actually rated for "a maximum continuous DC input current of 37.5A" as you can see by the cut out of the linked instructions of the controller.
So the safety values you were referencing are already included in the 30 amp rating, as per... view full answer...
The step pad you are referring to is indeed a Westin pad, and is a replacement for 3" round nerf bars; I have added the photo you were referring to, and the part number for the step pad is the following:
- Replacement Step Pad for Westin Platinum Series Nerf Bars # 26-0001 view full answer...
Yes, so long as your 6,000 lb Dexter axle has a 5-bolt brake mounting flange (which it should), then you can use the Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs # 23-465.
If you also need the left hand side the correct part number is the Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Left Hand - 7,000 lbs # 23-464. view full answer...
The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package part # BWRVK3775 weighs 250 lbs but it's easily broken down into two parts consisting of the head which weighs 70 lbs and the base which weighs 180 lbs. There are two pins on the head which allow you to remove it from the base easily. view full answer...