The center pin of the Demco Trailer Connector Adapter - 6-Way - 7' Cord # DM9523006 is normally the circuit that carries the 12 volt circuit and it is active. If the 6-way on your tow vehicle has this circuit active it would be carried with this part number. view full answer...
Customers have used screw # TFX150 with matching bit # TX430-1 for wood. Self-tapping machine screws would work for metal surfaces in a size the same as or close to # TFX150.
There isn't a set amount you have to use. Three would be the minimum. One on each end and one in the center. Five would be better. It all depends on the application. I would start with 5 placed evenly apart and see if that is going to work and then go from there. view full answer...
The Curt T-Connector # C56191 is designed to fit the Hatchback version of 2019 Ford Fiesta, so it will not be the correct fit for your Sedan, However, the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat # 118766 is designed specifically for the Sedan versions of 2019 Fiesta and will be the harness I recommend. This will require a wire to be run up to the battery, but will be plug and play the rest of the way. view full answer...
To flat tow your 2015 Ford Fiesta SE w/o EcoBoost you need at least 5 parts. Which consists of the base plate kit, tow bar, tow bar wiring, safety chains and a supplemental braking system. With the Roadmaster Direct-Connect Base Plate Kit # RM-524438-5, Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 and the Brake Buddy Select 3 Portable Supplemental Braking System # HM39524 you have said you are getting you have already accounted for 4 of the 5 parts because the Nighthawk... view full answer...
There is one hitch available for your 2012 Fiesta Hatchback. It is the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11067. The other Curt hitch that you saw is for the Sedan version.
I have included a link to the installation instructions and an installation video for this hitch for you. If you plan on doing any towing, first consult the vehicle owner's manual to make sure it is permissible to do so. The correct ball mount is # 3593. For a 1-7/8 inch ball use # 19256... view full answer...
If the weight of the bike rack and bikes is less than 150 lbs it would be perfectly safe with the Curt hitch part # C11067. So if you're at 110 lb you'd be totally safe. There would be no need for a safety strap. view full answer...
I measured Curt trailer hitch # 14090 for you. From the top of the mounting flanges to the top of the cross tube is 2-1/16 inches. The cross tube itself is 2-1/2 inches square. This hitch was designed for 1996 to 2018 Chevy Express and GMC Savana cargo and passenger vans. view full answer...
We do have trailer a hitch that is compatible with the hatchback version of your 2014 Ford Fiesta it is the Curt # C11067.
If you let me know what you plan on using the trailer hitch for, I can make additional recommendations if necessary. view full answer...
AAMCO most likely disconnected it when they did work on your vehicle since most vehicles require disconnected the battery before doing so so my guess would be that they forgot to reconnect it at the battery upon completion of the work so you should check there. Also make sure the wiring connections at the battery are made tightly. view full answer...
I talked to Saris about the Saris SuperClamp EX 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Wheel Mount # SA4025F and confirmed that it will indeed work on Class 1 1-1/4" trailer hitch receiver. Locks are included to keep your bike and bike rack secured to the vehicle. I attached a demonstration video for you to check out. view full answer...
Yes the Roadmaster tow bar part # RM-520 will work great to flat tow your 2012 Ford Fiesta but you will need a base plate kit as this does not come with that. For that you'd want the # 524425-1.
This is something you could install yourself.
Other things you'll need:
Lighting safety cables # RM-9243-1
Supplemental braking # BLU37TR view full answer...
Absolutely! In order to flat tow your 2019 Ford Fiesta you will need a base plate kit, a tow bar, safety cables, a lighting solution, a braking system, and likely a high-low adapter. I will list my specific recommendations below and go into a bit more detail on each further down.
Base Plate Kit - Roadmaster Direct-Connect # RM-524438-5
Tow Bar - Roadmaster Nighthawk All Terrain # RM-676 (includes safety cables)
Lighting Solution - Roadmaster Hy-Power Diode Kit # RM-152
Braking System... view full answer...
I spoke with my contact at Hollywood Racks and he informed me that when you install the Over-the-Top # HRF2-3 on a 2011 Ford Fiesta Sedan you want to put the lower brace just above the rear bumper. He said not to put all of the weight on the rear bumper though. view full answer...
Trailer wiring harness # 56047 is for a 2015 Ford Fiesta sedan. But the ST is a hatchback so the harness will not fit. For a hatchback you would use # 118641.
Another issue is that you would not use this type of harness to tow the Fiesta behind the motor home. This harness is for a Fiesta to tow a trailer behind it. It does not work in reverse, so you need a different lighting solution.
Since there aren't any plug-in tow bar wiring harnesses for the 2015 Ford Fiesta ST at this time, your... view full answer...
We actually have just what you need so that your Roadmaster EZ5 Base Plate Kit # RM-524438-5 will work with your Blue Ox Acclaim Tow Bar # BX4330.
Base Plates Adapter Brackets part # BX88185 and are compatible with the EZ5 base plate kits like what you have. view full answer...
You definitely can use a pickup to tow your 2018 Ford Fiesta as long as the Fiesta doesn't exceed the weight ratings of the pickup or the trailer hitch. I am not sure what year Ford F-150 you are wanting to use but if you look in your owner's manual it will tell you the max weight rating for your pickup. A 2018 Fiesta should weigh somewhere between 2,500 lbs - 2,800 lbs though so your F-150 should have an easy time towing it.
The Roadmaster Direct-Connect Base Plate Kit # RM-524441-5 does... view full answer...
Sounds like a great solution! When using the Adapter 7-Pole to 4-Pole and 5-Pole part # 37385 both the 4 and 5 pole are active so plugging in both your dolly's 4-way and you Fiesta's 4-way will work. The only concern I would really have would be with over loading your towing vehicles trailer towing circuits. It seems like you wouldn't have issues but there is always the concern. If this happens you would blow a fuse on your towing vehicle and have to replace it. If it does happen I would... view full answer...
The only trailer hitch option we currently offer for a 2016 Ford Fiesta ST is the Curt Trailer Hitch Receiver part # C11067 which features a direct bolt-on fit. It has a class I capacity with 1-1/4" opening that is great for anything from towing to hitch mounted accessories like bike racks and cargo carriers. view full answer...
I do have an option for you, but the Hollywood Rack SportRider SE # HLY74FR is actually for Class 2 or 3 hitches. Even thought it will fit a 1-1/4 hitch, yours is a Class 1 which will make it incompatible.
Another option, especially if the bike is too heavy for you to carry, is the Kuat NV 2.0 for 1-1/4" Hitches # BA12B. You can purchase the Access Ramp # ANVBRB that you can attach to the bike rack so you can roll your bike up/down instead of lifting it. It does have a weight capacity... view full answer...
I would love to help you get absolutely everything that you need to flat tow your 2018 Ford Fiesta SE Hatchback. However, Blue Ox does not make a base plate kit for the non EcoBoost model therefore I recommend you use Roadmaster instead. I typically prefer Roadmaster anyhow as they offer more options for flat towing equipment. I have attached a list of all the parts you will need below:
Roadmaster Nighthawk All Terrain Tow Bar part # RM-676
Roadmaster Direct-Connect Base Plate Kit part... view full answer...
Go To Results