The Custom Installation Kit for DeeZee 6" Oval Tube Steps part # DZ16318 are brackets designed specifically to attach DeeZee tube steps. I cannot guarantee the DeeZee installation kit will work to install the Ford's OEM running boards without modification. I was not able to find any information on which manufacturer produced the OEM boards on the truck.
I recommend to replace the boards as well with Westin Sure-Grip Running Boards w/ Custom Installation Kit part # 27-6125-1265 to ensure... view full answer...
We have a couple Westin bumpers that fit your 1998 Ford F-150 but part # 31016 fits certain model years of the Dodge Dakota and not your truck.
Instead we have part # 31002 which is chrome plated bumper that will fit your F-150 but we don't currently have a black powder coat bumper that does. view full answer...
I'm not quite sure what you mean but I'm assuming since you were looking at a tailgate assist that that's what you're looking for. If that's the case then the DeeZee Tailgate Assist Custom Tailgate-Lowering System # DZ43203 would be a confirmed fit as long as your 1998 Ford F-150 isn't a stepside or flareside model. view full answer...
The Roadmaster XL Base Plate Kit, # 492-1, will have two brackets that will attach to the vehicle frame. One on the drivers side and the other on the passenger side. It gives two attachment points for a tow bar to connect to.
When towing, the towed vehicles weight should not exceed 40 percent of the towing vehicles weight. The towed vehicle will be in neutral and the steering wheel must be unlocked.
Check the vehicle manufacturers instructions for the proper procedures to prepare the... view full answer...
The Hopkins Universal Mounting Bracket # HM48625 will allow you to mount the Hopkins Endurance Quick-Install 7-Way Trailer Connector # HM47210.
Be sure to use Dielectric Grease # 11755 on the connector to prevent shorts in the connectors. view full answer...
Unfortunately we do not carry the OEM replacement pigtail for the 1998 Ford F-150. You would have to try a Ford dealership, auto part store, or salvage yard. If they do not or cannot get the replacement you can always cut the plug off and hard wire the ends together. I recommend using Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 10 Item # DW05745-10 when connecting the wires. These will protect your connection from corrosion and get your 7 pole plug working... view full answer...
The correct replacement for the Westin E-Series Round Nerf Bars that fit a 1997 Ford F-150 will depend on what cab size you have on your truck.
- Regular Cab: Replacement Installation Hardware Kit for Westin E-Series Round Nerf Bars # 23-110PK
This kit fits the Westin E-Series Round Nerf Bars # 23-1100 (Chrome) and # 23-1105 (Black)
- SuperCab: Replacement Mounting Hardware Kit for Westin E-Series Round Nerf Bars # 23-111PK
This kit fits the Westin E-Series Round Nerf Bars # 23-1110... view full answer...
The recommended thermostat switch for the Flex-a-lite 16" Flex-Wave Electric Fan part # FLX236 in the 1999 Ford F-250 4x4 is Flex-a-lite Adjustable Temperature Controller for Electric Fan part # FLX31149 which will actually read the engine coolant temperature to activate the fan when needed. It will also turn the fan on when you have the AC running in the truck.
I have attached the wiring diagram for the thermostatic controller for your reference. view full answer...
On the back of your factory 7-Way trailer connector on your 1997 Ford F-150 the wiring harness should plug into the back of it meaning it can be removed. If that is indeed the case with yours then you can install 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End Item # HM40975 in its place. I have linked a video that shows installation for you.
I do not anticipate a problem because all of the replacement 7-Ways listed for your truck install in the same way. view full answer...
For your 1999 Ford F-150 the Curt front hitch part # 31038 has been confirmed as a fit and would work well. The fit info we have for this hitch is that it is for trucks with front tow hooks like yours so it will fit. view full answer...
The Curt # C57WR Universal Truck Bed Exender will fit nearly all full size pickup trucks including Chevrolet, GMC, Ford, Dodge, Ram, and Nissan, with standard 60" wide tail gates. (6.5 foot and longer beds) and provide 36-1/2 inches of additional bed length for storage and hauling. May not work with flare-style tailgates. Compatible with most tonneau covers.
You will need to measure your tail gate width to be for sure. view full answer...
Thanks for your recent brake controller and wiring adapter purchase!
Yes, the Tekonsha Primus IQ brake controller # TK90160 should work with the Curt adapter 4 pole to 7 pole and 4 pole # C57674 with the integrated test lights. In the past, there were some situations where the test lights illuminated with the small signal that the brake controller sends to detect a trailer. Our representative at Cequent Performance hasn't had any customer issues regarding the Primus IQ with test lights.
I... view full answer...
The correct snow tire chains for a 1999 Ford F-250 will be based on tire size. If you have 235/85-16 tires then the Titan Chain Snow Tire Chains part # TC2821 will fit. If you have 215/85-16 tires then you'll need the part # TC2819 instead. If you have a different size please let me know what that is. view full answer...
We do not have a fit for an F-100 but the Hopkins EasyLift, # 74211, will fit the 1998 Ford F-150 as long as it does not have a stepside bed. I have included a link to a video review of the EasyLift for you. view full answer...
For your 1998 Ford F-150 I recommend checking out the CIPA Wedge-Shaped, Stick-On HotSpot Mirror # CM49002
These 1-1/2" tall x 2" long mirrors have a convex design so you can prevent blind spots and are a stick-on fit for easy installation. If you do not want to use stick-on mirrors then the CIPA Top Mounted Blind Spot Mirror # CM49805 is your best option; it is an oval mirrors which clamps onto the top or bottom of your F-150's mirror and measures 4-3/8" wide x 1-3/4" tall.
I have included... view full answer...
Tonneau covers and ladder racks can be compatible with each other when they do not use the same mounting points on the truck bed rails. Both tonneau covers and ladder racks can mount either inside the bed rails or on top of them.
As an example, the TracRac SR sliding ladder racks like # TH43002XT-501 mount on top of the bed rails so they will work with tonneau covers like Tonno Pro soft roll-up cover # TPLR-3080 which installs inside the bed rails.
Please feel free to email me back with... view full answer...
If you have a factory 4-flat connection on your 1999 Ford F-150 4x4 then the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # HM40145 will be a confirmed fit. This custom-fit T-connector plugs into your Ford F-150 wiring harness, which is located behind the rear bumper, near the driver's-side frame rail.
If you do not have the factory 4-way flat, then you will want the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56031.... view full answer...
If your 1997 Ford F-150 came with a factory 7-Way or 4-Way then you can use the brake controller wiring adapter # 3035-P for Tekonsha brake controllers, or # HM47715 for a Hopkins brake controller. I have included a link to the installation details for the Hopkins and Tekonsha harnesses for you to view. view full answer...
Your RBW 15,000 pound hitch should fit in the Reese rails unless they are installed improperly. When the hitch was installed on the F-550 it may have been tightened down with the gooseneck adapter installed and the rails are just out of position for your fifth-wheel hitch. If the hitch you have is not fitting by a small amount I would try to loosen the mounting bolts on the rails and then install the fifth-wheel hitch. After you have the hitch installed you can then re-tighten the mounting... view full answer...
Go To Results