I spoke with TruXedo and they were able to determine that you have a TruXedo Original Tonneau Cover on your 2005 Dodge Dakota with the 5' bed and the correct replacement cover for this is the Replacement Tarp for TruXedo Original Tonneau Cover part # TX390101-CVR. view full answer...
On either of the landing gear legs there should be an identifier/part number, this may be on a white sticker or stamped into the metal depending on the specific landing gear. With this part number we can then identify your landing gear and ensure have the correct kit. The repair kit that you linked to, # LC146059 for the lead leg and # LC146060 for the follow leg, are for the Lippert Venture 5th Wheel RV Landing Gear. If you have this type of landing gear, then yes these are the correct... view full answer...
What you really only will need is an actuator kit like the HydraStar part # HS381-9067 which comes with the actuator you need and all of the electronics needed to install the kit. You'd just connect the line that runs to your current surge actuator to the back of the Hydrastar and it would tie right in to the system you have now. You can then lock out your surge actuator by welding the two moving sections together or running a bolt through both pieces.
Your 2010 Dodge Ram would not have... view full answer...
You will need the Replacement Tarp for Extang Tuff Tonno Soft Roll-Up Tonneau Cover, part # EX13430. This replacement tarp will work with your Extang Tuff Tonno cover. view full answer...
Based on the Curt 1" High-Rise Ball for Curt Double Lock, Flip and Store Gooseneck Trailer Hitch # C60603 you asked from, I'm assuming you have a gooseneck hitch and need a replacement hitch ball. Obviously you don't have a B&W hitch because you asked for a round ball option versus the square shank so we can at least slightly narrow it down for your 2004 Dodge Ram.
We have both Curt and Draw-Tite hitch options for you Ram, so I'll give you the part numbers for the hitch and then the... view full answer...
The Replacement Mounting Hardware Kit # BAKBK-200KIT referenced in your question is the correct hardware bag for many (but not all) of the BAKFlip Tonneau Covers models. I spoke with my contact at BAK Industries and she did say that this is the correct kit for your 2007 Dodge Dakota, whether you have the BAKFlip G2 # BAK26206 for the 5 foot bed or # BAK26205 for the 6-1/2 foot bed.
The kit includes everything needed to actually install the cover - essentially everything but the rails... view full answer...
I recommend replacing all of the hardware for your Pro Series 2000 5th Wheel Hitch with the Replacement Hardware for Pro Series 20,000-lb 5th Wheel Trailer Hitch item # PS58475. The 5th Wheel Hitch and rails are reusable and transferable to different vehicles but the hardware isn't which is why the dealer cut the bolts off. The hardware is not meant to be torqued down more than once and the pins wear out. The kit comes with the correct grade and length of bolts as well. Bolts bought at... view full answer...
You can click on the linked page to see all our brands of tube steps for your 2006 Dodge Ram Pickup. You will want to try to visually match your nerf bars to those shown to narrow down the many options to the specific style and brand you have. First, at the top of the page you can use the drop-down menu bar to select your truck's cab style; this will help narrow down the results. One of your existing step pads may have a logo or branding somewhere on it.
Based on your dimensions and 5-post... view full answer...
You're having a hard time finding a replacement gooseneck ball for that gooseneck hitch on your 1996 Dodge Ram Pickup because it looks like you have a pretty old system and gooseneck hitch balls are hitch-specific - they aren't all the same like what we see with a bumper pull ball mount.
It doesn't look like we have anything that is compatible with the 2" receiver you have so my recommendation is to replace the whole thing with the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch... view full answer...
The correct replacement tarp for your 2006 Dodge Ram with 6-1/2' Bed using the Extang FullTilt SL Vinyl Tonneau Cover is part # EX37770. view full answer...
We have the Custom Base Rails and Installation Kit for Demco Hijacker SL Series 5th Wheel Trailer Hitches # DM8553004-12 confirmed to fit your 2005 Ram 2500 short bed. The brackets and hardware are available separately as part # DM8553004 if you have the rails. view full answer...
It sounds like you need pin set # 6014 and 2 of pin # 6020PIN or 90 degree pin set # RP58240 to install your # RP30051. It also sounds like you will need bolt kit # 58296 to attach the head and cross member to the base. view full answer...
We currently have a 1-1/4" Wide # TX1115173 and 1" Wide # TX1117877 Velcro strip for tonneau covers. These are the closest we have to the 1-1/8" measurement you have. These are both 8' long as they can be trimmed down to fit your 5-1/2' bed length. These are both designed to slide into a rail and are held in place with screws at the ends. view full answer...
The correct replacement step pads for the Westin Signature Series 3 inch diameter tube steps is part
# 25-0001. The replacement pad includes the barrel clips used to attach the pad. I've provided a photo showing the dimensions of the replacement pad. view full answer...
In order to replace the lock cylinder, it must be in the unlocked position. You may be able to have a locksmith remove the broken key in the lock. We do sell replacement lock cylinders If you have a roof rack and accessories that are all keyed the same, you would need to find the lock cylinder number on the exterior of the lock cylinder face. Once you have the lock cylinder number, you can order the replacement Thule lock cylinder. Its part number is THKEYN, then the key number you are... view full answer...
We do have a large selection of replacement parts available for Curt weight distribution systems, which I have linked for you below.
It sounds like you might be needing the Spring Bar Retainers # 17109, which are designed for the Curt Round Bar systems. This kit includes two clips, two locking pins, and two rivets.
I am not sure what you mean by the L shaped keeper, but we do also have the Replacement Lift Bracket # C17008, which is what mounts to the trailer frame and provides an attachment... view full answer...
I reached out to my tech contact at Firestone and they cannot confirm a fit between that bracket kit and that air bag.
I did a little further research and the Ride-Rite # F2299 is the complete kit that is a confirmed fit for your 2009 Ram 3500 4x4. It uses the # F6401 air spring, but bracket # F5757, # F5370, and # F5758.
The f2479 bracket kit you mentioned has been discontinued and most likely why my tech contact couldn't confirm a fit, but consists of those same three brackets.... view full answer...
To get replacement hardware for the Draw-Tite Max-E-Loader 41533 you need to order part # RHK on our site and input the hitch part number. Once you place your order we'll get all of the hardware put together in a replacement kit and send it out to you! view full answer...
You will need the Firestone Rear Air Spring # F9002 to replace the air spring on your 2003 Dodge Dakota 4wd. These were the springs used on the Firestone Ride-Rite Kit F2162, which has been discontinued. view full answer...
Yes, to replace the end caps for the Westin Sure-Grip Running Boards w/ Custom Installation Kit # 27-6135-1975 on your 2017 Dodge Durango you need part # 80-0221 for the front driver (or rear passenger) side and part # 80-0220 for the front passenger (or rear driver) side. view full answer...