Replacement Hardware for Pro Series 2000 5th Wheel Hitch
Question:
I have your Pro series 20000 5th wheel hitch purchased about 2 years ago. Im transferring the hitch to my new to me 2005 3500 ram. I have everything except the 4 mounting bolts that go from the rails to the frame. Do have the spec for them? stainless 1/2 inch by how long? The dealer cut the old bolts off and discarded them so Im unsure on the length and grade ect. Any help is greatly appreciated.
asked by: Karl F
Expert Reply:
I recommend replacing all of the hardware for your Pro Series 2000 5th Wheel Hitch with the Replacement Hardware for Pro Series 20,000-lb 5th Wheel Trailer Hitch item # PS58475. The 5th Wheel Hitch and rails are reusable and transferable to different vehicles but the hardware isn't which is why the dealer cut the bolts off. The hardware is not meant to be torqued down more than once and the pins wear out. The kit comes with the correct grade and length of bolts as well. Bolts bought at a hardware store will not be covered under any warranty your 5th Wheel Hitch may have.
Product Page this Question was Asked From
Replacement Hardware for Pro Series 20,000-lb 5th Wheel Trailer Hitch
- Accessories and Parts
- Fifth Wheel Hitch
- Hardware
- Pro Series
more information >
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Can Mopar M20 Fifth Wheel Hitch be Converted to Slider Hitch
- Q&A: How to Wire a 7-Way Trailer Connector on a 2015 Chevrolet Silverado 1500
- Q&A: Assembly Diagram for the Reese Titan 20k Fifth Wheel Hitch part # RP30869
- Q&A: How to Determine Correct Height Setting for 5th Wheel Hitch
- Q&A: Fifth Wheel Hitch Recommendation for a 2011 GMC Sierra with a 6 ft Bed
- Q&A: How to Determine the Weight Carrying Capacity of a Flatbed Gooseneck Trailer
- Q&A: Recommended Solution to Bolt on Safety Chains to Utility Trailer
- Article: Best 5th Wheel to Gooseneck Adapters (2023)
- Article: Gooseneck to 5th Wheel Adapters