Cold Air Intakes Specs:
Go confidently though deep water crossings by moving your air intake above your vehicle's hood. Snorkel improves overall engine performance by preventing water and dust from getting into your engine, giving you better air flow.
More Information >Videos
for Cold Air Intakes
Help Articles
for Cold Air Intakes
Expert Answers
for Cold Air Intakes
The PR4 leaf spring which we sell as #e28SR is not interchangeable with the PR4B which we sell as part #e54SR. The springs are different lengths and capacities, with the #e54SR being 25-1/8 of an inch long for a 3500 lb axle and the #e28SR being…
view full answer...The inner stainless steel ring included with the Spindle Grease Seal Set #BB60005 has an inside diameter of 1.0645 inches (and an outside diameter of 1.375 inches). This ring is designed to install on the spindle for the grease seal to ride on once…
view full answer...The Adarac Pro Series truck bed ladder rack part #A38ZR is a confirmed fit for your 2020 Jeep Gladiator, is black, has a 500 lb weight capacity, and is compatible with tonneau covers like the BAK X4 part #BAK88ZR that fits your 2020 Jeep Gladiator.…
view full answer...The #168233 Double Lip Grease Seal has an outside diameter of 2.332 inches and an inside diameter of 1.688 inches. This seal is not compatible with a AF2527E seal with a O.D 2.312, because, even though the O.D. id very close, the inner diameter of…
view full answer...Pulling the wheels and hubs off of your 5th wheel trailer is the best option when trying to identify what wheel bearings and seals are installed. On the back of the wheel bearings there usually is printed a part number like #L44643. With these…
view full answer...Old springs tend to stretch out as they wear out so in your situation you would want to go with a slightly shorter spring like the 25-1/4 inch length which we have in a 4k capacity part #e57SR, 5k with part #e28SR, or 6k part #e78SR.
view full answer...The OEM location for the gooseneck ball hole in the bed of your 2020 Ford F-350 will be 45-1/2 inches forward from the rear edge of the truck bed. There would be a flat spot in the bed where the ball will install as well. I attached a picture that…
view full answer...The issue you are having with the gooseneck hitch ball getting stuck in the trailer hitch after sitting is pretty common, especially with the factory pop-in hitch balls that have the latch in the top like the Curt Ball and Safety Chain Loop Kit part…
view full answer...In regards to the Linxup GPS Tracking Device part #300-AT3, once you install the GPS device, you'll be ready to choose and set up the Linxup service plan that works for you. When you purchase a service plan, you can download the Linxup mobile app…
view full answer...No worries, we are happy to help! Yes, the Curt Ball and Safety Chain Loop Kit #C60692 listed as a fit for your 2019 Ford F-250 replaced the C60609 so they are essentially the same and they both fit your F-250. Sometimes the changes made to kits that…
view full answer...The Galeo Pro GPS Tracking Device #GA94FR will update the location when you press the "Locate" button in the app. Otherwise you will get push notifications when it detects movement so you know when your trailer is being moved around - which…
view full answer...The Linxup GPS Tracking Device #300-AT3 is for the unit itself while the Linxup GPS Tracking Device #300-AT3-S includes a 1-year subscription to the tracking service. If you are only looking for one unit it is best to get the unit with the tracking…
view full answer...Filter Products (2)
Contact and Help
What our customers are saying:
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD