Counteract Stud Cleaning Tool for 7/8" Wheel Studs

Video Transcript for Review of Counteract Wheel and Tire Cleaner - Stud Brush - CA47FR

Hello everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this Counteract stud cleaning tool for the 7/8 inch or 22 millimeter size wheel studs. Now, when you're installing your wheels to your vehicle or trailer studs and hubs, it's always necessary to clean all the threaded surfaces of a wheel assembly to ensure proper clamping force is achieved, and that you're adhering to the Tire Industry Association's RIST procedures. This part here will include the stud cleaning tool. It includes the 7/8 inch or 22 millimeter stainless steel brush cartridge.

That cartridge installs right in the very end just like that. Take the included hex key, tighten down the three set screws to hold that cartridge in place. And then it includes this half inch drive adapter that you can pop into the very back here. And this will allow you to insert it into either a handheld drill or an air driver. Now, this stud cleaning tool allows you to quickly clean rusted and corroded 7/8 inch or 22 millimeters size wheel studs on your vehicle or trailer to allow for proper wheel mounting.

As we've mentioned, you would insert this end here into a handheld drill, or even the Counteract air driver would work. We sell that separately on our website. It's part number CA39FR. And it's listed on this product page as a related product. But basically, this tool inserts into that drill or air driver, and it'll allow you to clean the wheel studs with the stainless steel brush cartridge on this end.

Once it's in there, you just pull the trigger, and it'll rotate, and then clean this corrosion off your studs. But that should do it for the review on this Counteract stud cleaning tool for 7/8 inch or 22 millimeter wheel studs..