bing tracking image
  1. Vehicle Suspension
  2. SuperSprings Intl
  3. Jounce-Style Springs
  4. Rear Axle Suspension Enhancement
  5. Light Duty
SumoSprings Solo Custom Helper Springs - Rear Axle

SumoSprings Solo Custom Helper Springs - Rear Axle

Item # SSR-329-47
Retail:$339.49
Our Price: $294.99
You Save: $44.50
Vehicle Suspension

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 4 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
900-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation. Great Prices for the best vehicle suspension from SuperSprings Intl. SumoSprings Solo Custom Helper Springs - Rear Axle part number SSR-329-47 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2272)
  • Q & A (0)
  • Photos

SuperSprings Intl Vehicle Suspension - SSR-329-47

  • Jounce-Style Springs
  • Rear Axle Suspension Enhancement
  • Light Duty
  • SuperSprings Intl

900-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.


Features:

  • Helper springs upgrade your vehicle's rear suspension for improved driver control and comfort
    • Support heavy rear loads to keep your vehicle level
    • Help to absorb bumps and shocks
    • Minimize sway
  • Progressive load control - springs compress according to the weight of your cargo
    • Lighter loads - springs compress easily at first for soft engagement and a less bumpy ride
    • Heavier loads - springs compress by as much as 80 percent for support
  • Springs work independently from each other to compensate for off-center loads and reduce body roll during sharp turns
  • Durable microcellular urethane
    • Works in temperatures from -25 F to 200 F
    • Resists damage caused by oils, road salts, and UV rays
  • Minimal lateral expansion - springs compress vertically instead of to the sides so they aren't easily damaged when operating in tight spaces
  • Maintenance-free - no tubing to run or air pressure to monitor like with air springs
  • Simple, no-drill installation
  • 2 Jounce-style springs included
  • Made in the USA


Specs:

  • Weight capacity (at 50-percent compression): 900 lbs
    • SumoSprings will not increase your vehicle's weight-carrying capacity
  • Limited lifetime warranty
  • 30-Day satisfaction guarantee


Rear Suspension Support

A heavy rear load can cause sag as your factory suspension compresses under the weight of the load. This means that the rear axle is trying to support not only the extra load but also the weight of your vehicle. And because there is less weight on your front axle, your front tires make less contact with the road, which causes problems with traction, steering, and braking. SumoSprings upgrade your vehicle's factory suspension to level your vehicle, improve driving performance, and keep your ride comfortable.


Installed spring when it is not compressed

SumoSprings provide progressive load control - the more you load them, the stiffer they become. With a lighter load, the springs will compress easily for soft engagement and a less bumpy ride. The closed-cell urethane material allows for smooth contact between the springs and your vehicle. And the springs act like a shock absorber to dampen road vibration.


Installed spring when it is compressed

The springs can also compress by as much as 80 percent to support a heavy rear load and to help your factory suspension bear up under the load. This evens out the weight, which levels your vehicle and ensures that your front tires are making better contact with the road. A level ride means that you have improved driving control, ensures safe headlight aim, and helps to minimize sway. The springs also support your factory suspension, which helps prevent sagging and reduces bottoming out.


The springs work independently from one another to support each side of your vehicle. This action helps to reduce body roll when you make a sharp turn. This also helps compensate for an off-center load.


Durable, Custom-Fit Springs

These microcellular urethane springs are tough. They resist abrasion, oil, salt, and UV rays that can more quickly wear out other springs, and they perform well in temperatures ranging from -25 F to 200 F (-33 C to 93 C).


SumoSprings compress vertically with minimum expansion to the sides, so they won't be damaged by nearby mechanical parts and they fit safely into tighter spots. And unlike air springs, SumoSprings require no maintenance or adjustment.


The helper springs are custom designed to fit your vehicle, and they install easily - no drilling required.



SSR-329-47 SuperSprings Sumo Springs Solo Rear Vehicle Suspension Kit

Replaces SSR-325-47

Installation Details SSR-329-47 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

SumoSprings Solo Custom Helper Springs - Rear Axle - SSR-329-47

Average Customer Rating:  4.7 out of 5 stars   (2271 Customer Reviews)

900-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.

by:
Mercedes-Benz Sprinter

I was a bit skeptical about these springs, but they do seem to help with the sway and rocking in my Sprinter camper van. I added SumoSprings to the back as well. They were a bit more challenging to install (especially in the front), so I had the dealer install them. It took them more time and effort - more than anticipated. Overall though I am happy with this modification.



by:
2008 Dodge Sprinter

Hard to install for 2008 Dodge Sprinter. Had to bend some metal on the van and use some grease along with tire removal. Purchased with matching front sumo springs. The front were easy install. I can tell a ride difference in the front but not the rear. The front spring stay in constant contact with the lower tire arm. The rear springs are not in contact with the rear axel. I attribute no rear ride difference due to this. The van has the original rear leaf strings with no other modification. Possibly when more weight is in the van a difference in ride could be felt.

Etrailer Expert

Jenny N.

4/2/2022

I would like to reach out to the manufacturer about the issues that you are having with the rear springs. I wanted to ask if you have the 2500 or 3500 Dodge Sprinter van?



by:
2006 Dodge Sprinter

I'm happy with the order, arrived on ti me



by:

Straight forward, just a real pain to get them into the slot.



by:
Mercedes-Benz Sprinter

This helped a lot ( Front and Back) in conjunction with a larger sway bar for my Sprinter Van.



by:
Mercedes-Benz Sprinter

Rebecca knows her stuff. I gave a request on a Mercedes Sprinter van for our son AND on my Mercedes Winnebago camper and she got both of them correct. The order arrived almost overnight. I trust her.



by:
Mercedes-Benz Sprinter

Helpful to control sway and wallow on my sprinter.



by:

What a great alternative to having to worry about the air bags all of the time!!



by:

Graeme product easy to install

Thomas

10/15/2020

Love them installed both front and rear. Took about an hour maybe two. No regrets



by:

Great product no issues still going gre at.



by:

Service was good. Product was good. A little pricey but overall good experience.



by:



by:



by:



by:
2017 Kia Sorento



by:
2015 Mercedes-Benz Sprinter



by:

I believe it’s going to be a great addition to my truck when pulling our RV. Looking forward to a smoother, more even ride. I left the 2x4 blocks in overnig8ht and drove around to ensure a good seat for the springs.



by:

I installed Sumo Springs on our 06 Xterra right after we bought our Casita 17' trailer. The back of the X squatted a bit more than I liked. I had also noticed before some tendency to bottom out if the car was full of people and stuff. These ingenious devices are a perfect solution for me! They are about 3/4" clear of being engaged with the axle when unloaded, so the ride is not overly affected, but progressively take up some of the weight when the back end starts coming down with load. It now sits very nicely with the trailer connected, no weight distributing hitch and stuff in the back, and no more bottoming. We've put a good number of miles on the X in the last year, towing and not towing, and they are still doing the job.

I should note, the back of my Xterra is lifted about an inch with AAL springs. If that were not the case, the Sumo Springs would be engaged all the time. That will vary with vehicle.

I will also note that they are non-adjustable, unlike airbags. I kinda like that, I didn't want to mess with adjusting air pressure and such. But once they do start kicking in as one or both wheels travel, they do stiffen it up quite a bit. I mean, there's no way around that; you can't take load without stiffening the suspension. As such I think they inhibit upward axle articulation a bit when 4-wheeling, but for us that's not a big deal. Since they do not connect to the axle, they don't affect downward articulation at all.

The pics are shortly after installation, one with the car unloaded, and two with trailer and gear loaded up.



by:

Very easy installation in about 20 minutes. Very ingenious concept as opposed to bolt on leaf style helper springs



by:

These Sumo Springs were easy to install, even for a 70 year old guy. I tow a 7,000lb camper and even tho I have a nice WDH I still had som sag on my Tundra. These helped level it out when towing and got rid of “some” of the bounce. They were really a godsend when I overloaded the bed with about 2,000lbs of pavers. That weight squished the Sumos significantly but the truck drove and rode great. Better and less expensive than air bags.



by:

Gave it 5 because of ease of install - note they use SAE threads 9/16, truck frame and oem is metric 15mm wrench. Makes no difference but don't use oem nuts on spring. I installed all shims supplied and this left about 3/4" gap so hoing its the best for my needs. Easy to reduce if needed.



by:

The SumoSprings Solo came to the RV Resort today. I installed them on my Titan SV today in less than an hour. Only drove 10 miles with them and they are what I was looking for. In my opinion it was a needed upgrade and thumbs up!



by:

While these worked great for the first few months and helped level the load, they have now become deformed and squished out of shape permanently. We have a slide in camper that is on the truck for only for trips otherwise the truck is unloaded and off the bumps. I did not expect them to deform so much, and so easily after only a year of use.



by:

I have had these on my Jeep Gladiator for over a year now and I still like them. Sumo Springs really help with sag when towing my Scamp camper trailer and when the truck bed is loaded with stuff. When it is cold outside they are stiffer and I can feel when they hit the stops on hard bumps. Sumo Springs are a very easy overload spring option with factory lift.



by:

Fairly simple to put on but need to work around the brake lines and bed cross beams. I haven’t tried it yet with weight. I have enclose pic of drivers side. Maybe can’t tell from the pic but there is space and flexibility around the lines around bolt.


25
2180
Show More Reviews

See what our Experts say about this SuperSprings Intl Vehicle Suspension

  • Recommended Jounce Springs To Fight Sway of 2013 Itasca Navion 24V Built On Sprinter Chassis
    Since you already installed a rear anti-sway bar on your 2013 Itasca Navion 24V I recommend adding SumoSprings Jounce Bumper Springs to the front and rear of your vehicle. These will do a great job of further reducing the sway you are feeling when driving your motorhome. For the front I recommend the # SSF-106-47, and for the rear I recommend the # SSR-329-47 if your 24V is built on a 2500 chassis, or # SSR-338-54 if it is built on the 3500 chassis. I included videos for each of the products...
    view full answer...
  • SumoSprings Solo that Fits 2005 Dodge Sprinter 2500
    SumoSprings does have a Solo setup that fits your 2005 Dodge Sprinter 2500 with the part # SSR-329-47 but the # SSR-338-54 does not fit your van so it would not work for you.
    view full answer...
  • SumoSpring Recommendation for a 2014 Mercedes-Benz Sprinter 2500
    The kit I recommend installing on your 2014 Mercedes-Benz Sprinter 2500 is this one: SumoSprings Solo Custom Helper Springs - # SSR-329-47 The other kit # SSR-330-47 you referenced does look to install the same way but it hasn't been confirmed to fit your vehicle. I believe I saw the comment you were talking about with the fitment and it looks like that was on a 2008 Dodge Ram Sprinter. Your newer Sprinter is a little different and if you look at the linked installation video of the correct...
    view full answer...
  • Are SumoSprings Required To Be Added To Both the Front and Rear on a 2016 Mercedes Sprinter 2500?
    Adding the Rear SumoSprings Solo Custom Helper Springs # SSR-329-47 is not going to be required on your 2016 Mercedes-Benz Sprinter 2500 but it will help if you are getting a lot of sag or road shock through your suspension. These will simply replace the hard rubber springs that came on your Sprinter to give you better suspension characteristics. These progressive springs have a capacity up to 900lbs at 50% compression. Often times the Front SumoSprings Solo Custom Helper Springs # SSF-106-40...
    view full answer...
  • 2007 Gulfstream Vista Cruiser Freightliner Sprinter Chassis Sway Bar and Suspension Enhancement
    For your 2006 Freightliner Sprinter Chassis I recommend the Roadmaster Rear Anti-Sway Bar Item # RM-1209-132 which will minimize side-to-side movement to improve overall stability of your vehicle and diminish effects of crosswinds, passing motorists and shifting cargo. I also recommend adding Sumo Springs Solo Custom Helper Springs - Rear Axle Item # SSR-329-47 to help with the stability in the rear of your vehicle and help prevent you from bottoming out. I've attached some videos that...
    view full answer...
  • SuperSprings Rear Helper Springs on 2016 Mercedes Sprinter 2500 are Not Engaging
    Having that slight gap between the new SuperSprings # SSR-329-47 and the platform they make contact with is common not just with this brand but with others as well. It allows your suspension to compress some so as not to have too much of an effect on the unloaded ride quality. Since the springs are not engaging at the rear of your 2016 Mercedes Sprinter 2500 that means that the factory suspension is not compressed enough. And that means that the amount of weight you have in the van is...
    view full answer...
  • Correct SumoSprings for a 2006 Roadtrek SS Agile on a Dodge Sprinter 2500 Chassis
    The correct SumoSprings Solo Custom Helper Springs for your 2006 Roadtrek SS Agile on a Dodge Sprinter 2500 Chassis is part # SSR-329-47 for the rear and part # SSF-401-54 for the front. These are both easy to install and will work well to provide additional support and help reduce body roll. They are a very popular upgrades for these Class B motorhome conversions.
    view full answer...

Do you have a question about this Vehicle Suspension?


Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Andrew K
Video by:
Andrew K
Employee Dustin K
Video by:
Dustin K
Employee John S
Video by:
John S
Employee Michael H
Expert Research:
Michael H
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Robert C
Installed by:
Robert C
Employee Michael B
Installed by:
Michael B
Employee Aidan B
Installed by:
Aidan B
Employee Mary K
Written by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Noah M
Updated by:
Noah M
Employee David F
Test Fit:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.