Replace one of the high-beam headlights in your Opti-Brite conversion kit (HLL79HB-2) with this DOT compliant light. Rear-facing LEDs and metallic parabolic reflector create a broad, smooth beam. Powder coated die-cast aluminum housing is rustproof.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna take a look at the replacement 4-inch by 6-inch high beam headlamp for the Opti-bright seal beam to LED kit. This is for a quantity of one light. Now this light will replace one damaged high beam headlamp from your Optronics Opti-bright headlight conversion kit, which is part number HLL79HB-2. We do sell that kit separately on our website. Now these use LEDs which are super efficient, ultra-bright, long-lasting. They have about 30,000 hours of life. They do use rear-facing LEDs and a metallic parabolic reflector to create a broad smooth beam.
This is a high beam light, makes it easier to see at a distance. It does use the durable SMT which is surface mount technology construction of the LED circuit board. That'll help better withstand shock and vibration and allows for improved heat distribution. It does use a clear polycarbonate lens. The case it's in is a powder-coated die cast aluminum housing which is rust-proof.
This light is IP67 rated for industry standard protection against dust and moisture. If you notice the plug here, it does accept the H4 three blade wiring connector. We do sell that separately. This is compatible with 12-volt DC and 24-volt DC systems. It is Department of Transportation compliant, meets the Federal Motor Vehicle Safety Standards 108 and the Canadian Motor Vehicle Safety Standards 108 requirement for automotive lighting. The specs on this again is one LED high beam headlamp.
The dimension is four inches tall, six inches wide and it uses 11 LEDs. So what I'm gonna do now is we're gonna go ahead and attach this to a 12-volt power source just to show you how bright the light is. So what I'm gonna do is we'll go ahead and hook up the ground and then what I'm gonna do is go ahead and turn off the overhead lights and hook up the power. So we got the overhead lights off. We'll go ahead and hook up the power and you can see how bright it is.
I am gonna back off a little bit just to give you an idea of how bright the light is. It gives off a very bright . And that's using the 11 LEDs. Go ahead and turn on the overhead lights again. But that should do it for the review on the replacement 4-inch by 6-inch high beam headlamp for the Opti-bright seal beamed LED kit, quantity of one.
Average Customer Rating: 4.1 out of 5 stars (11 Customer Reviews)
Replace one of the high-beam headlights in your Opti-Brite conversion kit (HLL79HB-2) with this DOT compliant light. Rear-facing LEDs and metallic parabolic reflector create a broad, smooth beam. Powder coated die-cast aluminum housing is rustproof.
Does not hold up well. Lifetime warranty but takes forever to get replacements. I have chosen to go to other brands with better warranty service.
My fire department is purchase a new Pierce fire truck. LED headlights from Pierce are over $1500, our salesmen recommended I buy some online instead. I did some research and found these headlights to be the best bang/buck for quality and price. I first installed them on our 1994 Pierce fire engine and have installed another set of Low and Hi beams on our 2014 Pierce fire engine, a third set will be ordered when we take delivery of our 107' Pierce ladder truck. The lights look great and throw off a nice bright white compared to the yellow of the old sealed beams. The only reason I cannot give these 5 stars is that they are not plug and play. I had to re-pin the wire plugs in order for these to work on both fire engines. After installing the first pair I thought maybe in was a fluke but when I had to switch the same wires on another fire engine that is 20 years newer I knew it was not a fluke. Not a big deal, if you have a test light and are only moderately handy its an easy fix. But for someone just looking to swap a bulb it is more involved then that.
These headlights were a great upgrade for our fire engine. We have to engines, both with LED high and low beams. Zero issues and nice bright white lights. We even ordered a 3rd set for our brand new fire truck. Pierce wanted over $1000 to upgrade to LED headlights so we did the upgrade ourselves for less than half the cost!
The headlights were nice, the shipping was excellent, the electrical connections were plug and play as well. The only downside is that the lights are not that great. The light is super bright and has a nice white color, but the light beam itself is very streaky. It looks good in the garage, but on the road it is incredibly hard to see the pavement when driving.
Help from Lori was great. I called Optronic's to see if head lights would fit my Jeep. Person on phone told me they didn't know and offered no additional help. Discovered etrailer carried these so called them. Lori didn't know, so she called Optronics tech support, found out they did, called me back, and placed the order. All was completed within 20 minutes. Lights arrived in 3 days. Good price as well. A COMPANY AND PERSON THAT UNDERSTANDS CUSTOMER SERVICE. Thanks Lori, great job!!
Also worked with etrailer last summer to replace all lights on my enclosed trailer. Upgraded to LED. Had the same excellent service. Thanks etrailer.
The fit and connections were perfect. Delivery was quicker than expected. Installation went quickly. I would use Etrailer again and also recommend.
Not worth the money or wait to get them. Not much brighter than sealed beams and no dimming for the DRL's. Very disappointed.
Works great
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.