DeeZee Red Label Truck Bed Tool Box - Utility Chest Style - Aluminum - 8 Cu Ft - Black

See what our Experts say about this DeeZee Truck Tool Box

• How To Secure Truck Bed Chest, # DZ8546B To the Bed of a 2008 Ford Ranger
  To secure the Truck Bed Chest, # DZ8546B, to the bed of your 2008 Ford Ranger, you would need to drill through the bottom of the box and through the bed. You would then need to use bolts and nuts of your choosing to secure the box to the bed. I recommend grade 5 or higher hardware. I also recommend using a sealant like # 0160297. With the box bolted to the bed, no one will be able to come along and take it out of the truck.
  view full answer...
• DeeZee Truck Bed Toolbox For 2000 Chevrolet Silverado With Stepside
  I spoke with my contact at DeeZee about your 2000 Chevrolet Silverado Truck With the stepside. We do not have a crossover toolbox that would fit your truck but we do have other options. I recommend the DeeZee Toolbox, part # DZ8546. this is a chest style toolbox made of rustproof Brite-Tread aluminum that measures 46-1/2 in long x 19 in wide x 15-9/10 in tall. Add 1 inch to the height to determine the clearance for the lid. this toolbox has handles on the sides to make it easier to remove...
  view full answer...
• Toolbox Recommendation for a 1994 Toyota 4x4 DLX Model
  For a 1994 Toyota pickup truck, excluding the T100, toolbox # DZ8546B is one of the recommended models. This tool box measures 46-1/2 inches across, 19 inches front to back, and 15-15/16 inches tall.
  view full answer...
• Dimensions of the DeeZee Red Label Black Aluminum Truck Bed Toolbox Utility Chest Style
  I can help you with the outer dimension of this toolbox. The exact overall dimensions are 46-1/2 inches long x 19 inches wide x 15-15/16 inches tall.
  view full answer...
• What is the Best Way to Install a Chest Style Toolbox in a 2009 Ford F-250
  For chest style toolboxes like # DZ8546B you will need to drill through the bottom of the box and the truck bed and then use the hardware of your choice to bolt the box to the truck bed. Then you would use silicone to seal up the holes. You need to be careful when drilling through the truck bed not to drill through any components on the other side of the bed.
  view full answer...
• How to Mount a Chest Style Toolbox in the Bed of a 2011 Ford Ranger
  On the chest style toolboxes like # DZ8546B you will need to use hardware of your choosing and drill through the bottom of the box and the truck bed to secure the box. Careful not to drill through anything important on the other side of the bed. Use a silicone sealant around the drilled holes to keep out moisture.
  view full answer...
• Will DeeZee Chest Style Truck Bed Toolbox-Black # DZ8546B Fit a 2004 Nissan Frontier With 6 Foot Bed
  The overall dimensions on the DeeZee Chest Style Truck Bed Toolbox-Black, part # DZ8546B, are 46-1/2 inches long x 19 inches wide x 15-9/10 inches tall. It shows as fitting two different bed sizes, the 4 foot 8 inch bed and the 6 foot 3 inch bed, on the 2004 Nissan Frontier. I would recommend to measure the width of your truck bed where you will want it to sit up against the cab and determine if there is enough room for the dimensions of the toolbox listed above. This toolbox is a utility...
  view full answer...
• Chest Style Truck Bed Tool Box Recommendations for a 2001 Toyota Tundra
  Adding the 1 inch measurement will apply to the outside dimensions of the Truck Bed Chest, # DZ8546B. But since the lid overlaps the box, that 1 inch measurement will not be added to the bottom of the box, just where the lid is. It will add some height to the top of the box with the lid factored in. I would say that the 1 inch measurement is the maximum which would make it 17 inches tall.
  view full answer...
• Can the Powerbuilt Unijack Be Stored On Its Side
  The Powerbuilt Unijack part # ALL620470 will need to be stored in an upright position like most bottle jacks so that it does not leak and so that air pockets cannot form inside. That said, the above only offers 18-3/8" of lift so you might need to use the Powerbuilt Unijack Bottle Jack with Built-In Jack Stand part # ALL620471 instead as this offers up to 21" of lift. The best way to store either of these would be in a truck bed toolbox like the DeeZee Red Label Truck Bed Toolbox part # DZ8546B.
  view full answer...
• Will the DeeZee Red Label Truck Bed Toolbox # DZ8546B fit a 1998 Chevy C1500
  Yes, I checked with DeeZee and the DeeZee Red Label Truck Bed Toolbox # DZ8546B that you referenced has been confirmed to fit all bed lengths and styles of the 1998 Chevy C1500 so it would work well for you.
  view full answer...
• Toolbox Recommendation for a 1999 Ford Ranger XLT
  The recommended tool box from Deezee for your 1999 Ford Ranger would be the DeeZee Red Label Truck Tool Box part # DZ8546B. The dimensions of this box are 46-1/2" Long x 19" wide x 15-9/10" tall which should work well with what you said you need.
  view full answer...
• Availability of Truck Bed Toolbox for 1990 Chevy Stepside Pick-Up
  DeeZee offers two chest-type toolboxes that would be a fit for your 1990 Chevy stepside. A 6.4 cubic foot model is available in silver diamond-plate as part # DZ8537 or in powder coated black diamond-plate as part # DZ8537B. An 8 cubic foot model is also available, # DZ8546 in silver diamond-plate or # DZ8546B for powder coated black diamond-plate. DeeZee does not offer a crossover type box for a stepside bed truck.
  view full answer...
• Does the DeeZee Red Label Chest Toolbox # DZ8546B Come with Mounting Hardware
  The DeeZee Red Label Truck Bed Toolbox, # DZ8546B, comes will all of the hardware required to install the tool box. DeeZee includes 4 sheet metal screws that hold the bottom of the toolbox to the bottom of the truck bed. If you would like to substitute hardware or use additional hardware, that would be acceptable as long as you have at least 4 screws or bolts holding the toolbox to the bed no smaller than 1/4 inch in diameter. My personal recommendation would be to use bolts, washers...
  view full answer...
• Tool Box Recommendation for a 2006 Mitsubishi Raider That Fits Below the Rails
  I have found several toolboxes that will fit your 2006 Mitsubishi Raider, however, the DeeZee Toolbox # DZ8748HDS is not one of them that will sit below your rails. The 3 series of toolboxes that should fit below your rails are DeeZee # DZ8537, # DZ8546, and # DZ9560, however, you will need to measure the bed of your truck to pick the right toolbox for you. The DZ8537 series is 37-1/8 inches long, 19 inches wide and 15-9/10 inches high. There is also a black version, # DZ8537B. I have...
  view full answer...
• Does UWS Truck Bed Toolbox Have Removable Tray
  We do carry a truck bed toolbox similar to the UWS 42" Standard Chest Toolbox - 8.4 cu ft # UWS01060 that has a toolbox tray, but the UWS model does not. Instead, I recommend an option from DeeZee: - DeeZee Red Label Truck Bed Toolbox - Utility Chest Style - Aluminum - 8 Cu Ft - Black # DZ8546B - DeeZee Red Label Truck Bed Toolbox - Utility Chest Style - Aluminum - 8 Cu Ft - Silver # DZ8546 Like the UWS toolboxes, the DeeZee are aluminum construction, are locking to protect your tools,...
  view full answer...
• How Much Does Lid Open on DeeZee Red Label Utility Chest Style Truck Bed Toolbox # DZ8546B
  I checked with my technical contact at DeeZee for the information you requested. The lid on the DeeZee Red Label Utility Chest Style Truck Bed Toolbox # DZ8546B will open up to approximately 80-degrees from its closed horizontal position. This 8-cubic-foot aluminum utility chest style toolbox features gas shocks for smooth lifting and lowering of the lid and two locking paddle-style handles (with 2 keys included). This item carries a limited lifetime warranty from DeeZee and is USA-made.
  view full answer...
• Will a Toolbox Work with a Ladder Rack on a 2010 Ford F-150
  The Erickson Over-The-Cab Truck Bed Ladder Rack part # EM07707 is designed to work with chest style toolboxes such as the DeeZee Red Label Truck Bed Toolbox part # DZ8546B. In order to use this ladder rack with a crossover style toolbox like the DeeZee Specialty Series Truck Bed Toolbox part # DZ6170NB the toolbox will need to be moved toward the tailgate about 12-16" to allow for the ladder racks mounting feet to mount.
  view full answer...
  
• Recommended Cargo Carrier With Tool Box for Lockable Storage
  The 20x60 etrailer Cargo Carrier for 2" Hitches # e98874 has the capacity to handle many tool box options. The internal dimensions are 59-3/4 by 20 inches, so a chest style utility chest will be best. I recommend the DeeZee Hardware Series Truck Bed Toolbox - Steel # DZ8546SB which is 60 lbs or the Aluminum # DZ8546B which is 52 lbs. If you want to go with a poly plastic option for weight and size preference, you can use the DeeZee Specialty Series Storage Box # DZ6535P. This is much...
  view full answer...
• Tool Box Recommendation for 1969 Chevrolet C/K Series Pickup
  I have a solution for you, but I didn't find a toolbox for your 1969 Chevrolet C/K Series that matched the dimensions you gave me. The closest dimensions for a toolbox I was able to find are 46-1/2 inches long x 19 inches wide x 15-15/16 inches tall. With these dimensions, we have 4 toolbox options that may work for you. One option is the DeeZee Red Label Truck Bed Toolbox, Black # DZ8546B. This utility-chest-style toolbox has a capacity of 8 cu ft. The paddle handles lock to secure...
  view full answer...

Do you have a question about this Truck Tool Box?