DeeZee Truck Bed Toolbox For 2000 Chevrolet Silverado With Stepside

Question

Question:

2000 chevy stepside the DZ8170 over all length is 69.75 ins. inside measurement of bed is 48 ins. that leaves 10 in overhang on each side seems like a lot to me just want to be sure no one shows the measurement of the bottom of the box.

asked by: Rob L

0

Expert Reply:

I spoke with my contact at DeeZee about your 2000 Chevrolet Silverado Truck With the stepside. We do not have a crossover toolbox that would fit your truck but we do have other options.

I recommend the DeeZee Toolbox, part # DZ8546. this is a chest style toolbox made of rustproof Brite-Tread aluminum that measures 46-1/2 in long x 19 in wide x 15-9/10 in tall. Add 1 inch to the height to determine the clearance for the lid. this toolbox has handles on the sides to make it easier to remove form the bed of your truck or you can secure the toolbox to the bed of the truck with the included sheet metal screws.

If you prefer this box in black, then I recommend part # DZ8546B.

expert reply by: Jeffrey L

0

Answer 1

The air bags that come in the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL88204 has a 5" - 7" standard operating distance and the difference is just dependent on how much room you have available. So…

view full answer...

Answer 2

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL88204 will fit with your lifted 2018 GMC Sierra 1500 but you might need to add a spacer kit if you had to lift the back of your truck. Since you didn't have…

view full answer...

Answer 3

The Yakima EXO SwingBase Swing Away Hitch Extender #Y34VR measures 33" from the center of the receiver out to the arm. While this should be enough room for you to open up the rear doors on your 2005 Ford Econoline, we haven't test fit this…

view full answer...

Answer 4

I have two options that will allow for you to securely attach a cooler to your Curt Cargo Carrier part #C18151. You can choose from either a cargo net or a set of cambuckle ratchet straps. A cargo net such as the Curt Stretchable Cargo Net part…

view full answer...

Answer 5

The 2-inch hitches offered for your 2000 Jeep Grand Cherokee are all Class III rated, with a maximum tongue weight capacity of 500-lbs. All can be seen using the link provided. The issue that arises with use of fixed hitch adapter/steps like the…

view full answer...

Answer 6

At the rear of a motorhome is much rougher than at the rear of a vehicle. This is due to the much larger distance between the rear axle of the vehicle and the rear of the vehicle that exaggerates the bumps similar to how the seats at the back of a…

view full answer...

Answer 7

The distance from the hitch pin hole of the Saris Swing Away Hitch Extender part #SAR36VR to the other hitch pin hole is 13-1/2 inches.

view full answer...

Answer 8

The Yakima EXO SwingBase Swing Away Hitch Extender item #Y34VR you were looking at does not reduce your tongue weight capacity by 50%. The only reduction it would cause to your 350 lbs capacity would be the 65 lbs weight of the EXO SwingBase itself.…

view full answer...

Answer 9

That's a good question, and I can confirm for you that the Timbrens which fit your 2021 Ford F-450 Super Duty 4WD, the Timbren Suspension Enhancement System #TFRSDJ are 100 percent compatible with a 5th wheel hitch. They install between the frame…

view full answer...

DeeZee Truck Bed Toolbox For 2000 Chevrolet Silverado With Stepside

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching