Pack'Em Trimmer Rack for Riding and Walk-Behind Lawn Mowers - Qty 1

Video Transcript for Packem Trailer Cargo Organizers - Landscaping - PK-MOWER-6S2 Review

Today we're going to be taking a look at the Pack'Em Trimmer Rack. Now this handy rack lets you carry one trimmer on your riding, zero-turn or walk behind lawnmower. What this does, once it's installed is it really eliminates the time wasting trips to and from your trailer or vehicle. It does come with a padlock, as well as keys and installation hardware to get the unit all the way installed. This is a universal system, so please keep in mind that these brackets right here can be positioned in ways that would work best for your mower and for your application. These are going to be pre-drilled brackets that bolt onto your mower. Now most mower applications will require some drilling.

You want to be sure to mount these in areas that can support the weight of the rack and the trimmer. This right here is your upper bracket. It has a multi-hole design. This upper bracket can mount to the fender on a zero-turn or a cross member by the handles on a walk behind. The lower bracket right here could mount to the deck or a lower support plate.

Really nice design. The base on these, we'll take a measurement on those. They're going to be the same on each bracket, so going across this direction, it's going to be about 3 3/4 of an inch, and going this direction it's going to be about 4 1/2 inches, so that's about how much space each bracket's going to take up on your mower. Then, you're going to get these two, removable arms. These bolt to the brackets on your mower. Again, the installation hardware to get them bolted on there is included.

I'll show you the upper arm first, so again this would mount towards where you're actually going to be on the mower, so the fender or again, a cross member support plate by the handles. This can be installed either direction, so it can be installed like this or you can flip it around, just really whatever works best for your mower. This is your top arm. This is a holder right here for the shaft of your trimmer. Again, that's going to be padlocked closed for a nice, secure closure and then, the top arm can be adjusted to three different angles for optimal spacing and to get the best angle for your set up.

That's a nice design of the unit. That way you can extend out, away from the mower. The arms do have cushions. That way, it's going to protect your trimmer as it carries it. You're going to have this one right here, it slides in, nice angle design to it as well, and then you can see there how it would hold the trimmer. It has the offset supports here, so that way it doesn't really rattle or shake. It holds it securely in place. This would be holding the lower part of the trimmer. The included padlock is going to secure the trimmer to the rack. It does come with two keys, so you place the key in there, rotate it. It comes out and then this lowers so that way you can get the trimmer in and out of the rack quickly and easily. Again, that's going to come with two keys that are keyed alike. Now when it comes to the construction, it's made from a sturdy, rust-resistant steel. It's going to have a gray, powder coated finish and it's going to have that really nice, unique hammered pattern that adds a nice, rugged look to the unit, and some style. With this part number you're going to get the two mounting brackets. You're going to get the two rack arms, padlock and two keys, and you're going to get your installation hardware. This has a capacity of one trimmer. The carrier weight is a 10 pound capacity and again, this is going to carry one trimmer on your riding, zero-turn or walk behind lawnmower. That's going to do it for today's look at the Pack'Em Trimmer Rack.