Tire has all-steel belts and deep, rugged tread with a 14-ply rating. 4,400-lb Max load at 110 psi. 16" x 6" steel dual trailer wheel with 5.35" offset features an 8 on 6-1/2 bolt pattern. Black powder coat is rust resistant.
Features:
Specs:
This tire has a 1-year worry-free guarantee. If within the first 12 months the tire is damaged in any way, it will be replaced at no charge.
Radial ply tires are designed for trailers that are towed on the highway. The cords on a radial tire are positioned at a 90-degree angle to the direction of travel so that they lay across the width of the tire from wheel lip to wheel lip. This construction prevents the cords from rubbing against one another when the tire flexes, unlike the cords on a bias ply tire. As a result, radial tires have less rolling resistance and heat buildup, which leads to a longer tread life and improved steering at higher speeds.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com. Let's take a look together at this Triangle ST 235 85R 16 load range G, heavy duty radial tire with 16 inch black steel dual wheel. This special trailer tire or ST Tire has sturdy sidewalls so that it can handle heavy loads. It is created specifically for trailers and not intended for use on other vehicles. As you know, radial ply tires are designed for trailers that are towed on the highway.
This radial tire is constructed with all steel belts to enhance durability and extend tread life. The computer generated tread design and premium rubber compound materials, gonna give you superior traction in wet or dry conditions. So as I stated just a moment ago, and as we have stamped in our tire, this is an ST 235 85 R16. The section width of this tire is 9.25 inches and the outer diameter is 30 and 7/8 inches. This is a load range G, meaning it has a 14 ply rating.
The maximum load single is 4,400 pounds at 110 PSI. The maximum load dual is 3,860 pounds at 110 PSI. And this has a speed rating of L, indicating a maximum speed of 75 miles per hour. Now this heavy duty black steel wheel with 1, 2, 3, 4 hand holes is designed to be used in dual wheel setups. Now this wheel does have a high offset, so it allows for the wheel to be used as either an inner wheel as we have in this orientation or an outer wheel.
In this orientation, on your dual wheel setup, the offset is either a positive or negative 5.35 inches. And this steel wheel is sturdy, it's corrosion resistant. It features a black powder coat finish over an e-coat primer. And this is a hub piloted wheel, which means it will center on the hub of the axle, not on the lugs. The pilot hole diameter is 4.77 inches.
It does require the use of flange nuts for installation, we do sell them separately here at etrailer.com. And this does use a wheel lug, a wheel lug size of 5/8 of an inch by 18 flange nut. This does include a metal valve stem that's already installed in the wheel and the diameter of this wheel measuring bead seat to bead seat is 16 inches and the width of the wheel, again, measuring bead seat to bead seat is six inches. The wheel has a capacity of 3,860 pounds. The bolt pattern is eight on six and a half inches. And in case you don't know, the first number in the bolt pattern is the number of bolt holes, and the second number is the diameter in inches of the circle on which the bolt holes sit. So to determine the bolt circle diameter on wheels with an even number of bolt holes as we have here, you're simply going to measure from the center of one bolt hole to the center of the bolt hole directly across from it. This assembly does meet the Department of Transportation specifications, and I think that's gonna wrap up our look today. I do hope that our time together was helpful for you. Again, my name is Andy. Thank you for joining me.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.