To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Perfect for light-duty towing, this custom, Oldsmobile Aurora trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Additional installation time needed for vehicles with heat shield or Load Leveling Control. Drilling required for installation , Exhaust must be temporarily lowered for installation
Average Customer Rating: 4.8 out of 5 stars (73 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.Shipping was fast. Product quality was impressive. Installation was "tricky" when it came to using the fishwire, but I finally got the hang of it. Pleased with my purchase.
The hitch itself is an excellent product. Solid, well built and finished very nice. However, if you do not have a lift, it is NOT a one hour job for the do it yourselfer. I have years of mechanic experience and I got frustrated installing it. I did get it done and it looks great but it took me three hours.
Crazy quick shipping, well packaged for a heavy item. I followed some other customers' advice and dropped the exhaust from the mid-car hanger as well as the rear, it made drilling the passenger side mounting hole much easier. But, I did not get the system back in place the first try- the oxygen sensor was bound up by it's heat shield. Very noticeable noise on test drive. Another look made it clear what needed to be dropped down and re-installed properly. The instruction sheet wasn't quite clear on what the orientation of the replacement rear pipe hanger should be, but it was easy to figure out. The wiring adapter went in just as easily, I even used the 3M-style quick connectors rather than stripping and soldering like I expected to, nice to only have to run the wire to under the back seat to hook to the battery! Overall, about two hours of work, if I had not been sidetracked, and under $200. A little tough seeing the boy driving off for his summer adventure, but nice knowing he has a good, safe hitch to pull his cargo along.
Tom
5/15/2019
still pleased with my purchases and dealings with your company. etrailer.com will be my go to source for all things towing related in the future. Thanks for good products at good prices, easily purchased and quickly delivered.
This was my 2nd Curt hitch purchased through etrailer. On the 1st one, for an '04 Saturn Vue, everything went smoothly; ordering, merchandise quality, delivery, installation - a total 5 Star experience.
My most recent order - A Curt hitch for an '02 Buick LeSabre, started out just as promising; ordering, merch quality, delivery, all great. Then came a small problem with installation. My parts list included the fishwire tool and two 3/8 flange nuts. Problem was, they weren't there. Luckily, I had some 3/8 locknuts, and some Ni-chrome wire that I fashioned into a fishwire tool, so I didn't have to call etrailer, then wait for parts to arrive. (I know they would've sent them next-day express - they take their customer service seriously). For me, this was only a minor irritation, but for someone else in the middle of an install, it may have been a significant problem.
Hence, this time only 4 stars. But in my opinion, they are a really good company.
John G.
6/5/2017
A year after install, all is good. The hitch has performed as promised. Thumbs up for etrailer.
Great product, super fast shipping and the price was right. I’m very happy with my purchase and the service received from etrailer. I turned around and ordered the wiring kit also. Didn’t think about it until I installed the hitch. That was also a great deal and super easy to hook up!
I was able to get this email installed on Saturday, and put it to use on Sunday to tow a motorcycle. Worked without any hiccups on the 6 hr round trip to the track. Only issues with install were due to the condition of the undercarriage of the Bonneville (rusted bolts/brackets). I highly recommend you spray some pb blaster on the bolts and nuts the day before install to help break them loose. Also may need to improvise if you only have one muffler. The weld nut on the side without the exhaust was rusted out because it was completely exposed to the elements (no bolt in hole) so I had to tap the hole. Again this is because of the condition of the 14 year old Bonneville. Product quality is great, the best I can tell so far!
It was an easy install. I can say this due to the fact I had never installed a hitch before. Directions spot on. My time invested was maybe 2 hours max 1/2 that was reading and prepping. Great product but the fish I am catching might disagree. I recommend this hitch to all my friends along with etrailer as a seller.
Great product, easy install, and I'm super happy with my hitch and how fast your service and delivery was.
Thank you, and I don't often respond to these review type questioners .
Reagan G.
6/28/2018
Its working out great. Pulled a trailer about 10,000 miles with that hitch and no troubles! Thanks.
The Curt trailer hitch for my 2006 Buick is the third hitch I've purchased from etrailer.com. Like the other two purchases, this one was perfect, as well! Great prices, fast shipment, professional on-line tutorials make purchase and installation a snap! While the tutorial suggested installation would take one hour, it took me 2 hours. One hour to install and another hour to get up off the ground. At 65 I'm not a flexible as I used to be............... ;) Would highly recommend the American made Curt hitch over other brands. Fit and finish were top know and it provides jobs for American workers. Worth a couple bucks extra, for sure! Thanks etrailer!
I installed my 12044 hitch on my 2005 Buick LeSabre. I have a couple comments. First the video suggests using long drill bits to help clear the muffler. I could not get long bits locally and besides after looking at it, even with a long bit you still have a nasty angle to drill the holes. Plus the cost of these bits for one hole. I was able to get to it by using a right angle drill motor after removing the rubber hanger halfway up the exhaust system. Was not too difficult to do, the rubber mount just slides out. This worked pretty well plus I was able to drill a straight hole. My point is that I would have appreciated it if this option was suggested in the video. Would have saved me some time. Please add this suggestion, it would have helped me and could help the next guy.
Installed on a 2004 Buick LeSabre Custom (1 Exhaust)
Took 2 days to get tracking info, 6 days to arrive at my door. Packaging was perfect, nothing was loose or damaged. Attaching the hitch proved easy if you are familiar with a wrench. After having watched the install video, I have a couple notes:
1) I HIGHLY recommend an electric/pneumatic impact wrench, it just saves so much time
2) Do not go easy on the WD-40
3) Save yourself from frustration by removing the exhaust from both the middle and the rear mounts to clear it out of the way (use a jack stand to support it) It wont be completely out of the way, but enough to drill without too many problems
4) Get some decent metal drill bits. The video says long drill bits will help you drill behind exhaust but as someone else said, they don't. If you follow tip 3, long bits are helpful but not necessary
5) Find a buddy to help you hold the hitch up when you initially put the bolts in, it gets heavy quick if you do it yourself.
Oh and the bolt fish wire was amazingly handy.
Overall it looks/feels great and etrailer couldn't be any more helpful with instructions on how to install! It's quality and I highly recommend it.
Unit is well made and the online how to video for my was very helpful. I am
planning to use this hitch with a cargo carrier to carry my gas cans to station
for fueling, we loose power at times during hurricanes and power may
be off several days.
I have bought a few hitches from etrailer in my life and they have always fit perfectly, without any problems. If I ever replace my vehicle and need a another hitch for it I would definitely buy from etrailer.
The trailer hitch that I purchased and installed myself for my 2007 Saturn Outlook has performed GREAT!! The install went extremely well.
Thanks!
I recieved the product in less time than I had anticipated and was very satisfied with the product. Based on my somewhat limited search this was an excellent value for the product and the quality was very good. The instructions for installation were accurate and all in all I am very pleased that I purchased this trailer hitch through etrailer. I will definitely `check etrailer for similar products if I have future need for products you handle.
This is a nice hitch. There were a couple things, not a big deal. I had to bend a lip on my car (2000 Buick Lesabre) right behind the back of the receiver tube because the tube sticks out a little bit. The muffler hanger bracket, they want you to hang your rubber hanger off the bolt. The holes in the hanger are a little bigger than 1/2" and the bolt is 3/8". What I did was went down to my local Ace and bought a spacer that the bolt would fit through and cut it to length, worked great. The nut for the muffler hanger bolt should be a nylon locking nut, I used some locktight and tightened it up against the spacer I put in. Besides those two things (and the rust in that unused bolt hole) it went smooth.
Installed hitch on a 2001 Buick Lesabre, single exhaust. Biggest problem was cleaning out the driver's side bolt hole as it was not used previously. Fishing worked great. Also purched the Curt Cargo Carrier. Fit was tight against the plastic bumper cover but not to intererence.
We were actually having a humorous discussion last night about how etrailer.com manages to ship so fast. The long, involved story involved Steve McQueen and total disregard for traffic laws. And special US delivery trucks with race engines.
Perhaps not.
Regardless, you guys always manage to ship the hitch MUCH sooner than I am prepared to install it. My question is: If YOU guys can do this, why can't everyone ELSE???
I did the job in the dark, on gravel, with my daughters helping me. It was a snap. Videos are amazingly helpful.
You guys rock.
Just wanted to say that im extremely pleased with my made in America Curt Receiver, you can feel the quality in the heft of the item, the welds are flawless and the powder coating looks perfect, there is no pitting or raised bumps from welding slag not being cleaned off before it was sent to be coated. and that's just the item itself, the price was very reasonable and the shipping was surprising at how fast it arrived, i almost didn't know what it was because i wasent expecting it for a few more days still. Also the communication between myself and etrailer was very personable, wasent a form letter (and if it was one its a great one because i couldn't tell if it was one)
We are very satisfied with our hitch. My husband will be using it to haul his handicap scooter. We had to return the first one because the installer had ordered the wrong one. The return was easily handled . We will be a return customer
Arrived very promptly, packaged well, and all “parts” firmly packed within box. Very sturdy hitch, US made! There was a “ASN” hitch sold on Amazon that went for $122(?), approx. $25 less. I inquired as to its “country of origin”, and was told China. Not a good gamble when your are towing something in my book.
Very happy with quality, cost, and this hitch’s “country of origin!”
I had the hitch installed by my mechanic and it has performed up to my expectations ever since.
Julian
12/18/2021
I. The interim I hauled a boat back from Florida and delivered it to upstate New York, with no problems. A very satisfactory product,
Arrived quickly, hitch had tore through the box, finish was scuffed up in one spot. Installation wasn't bad, video tip on cleaning out threads on car was a life saver.
Hitch InstallThis is my third hitch from Etrailer and as allways the install was as advertised. I have recomended your product to several others and have never heard a complaint. Thanks for a quality product with fast shipping at a fair price. Larry
Took about 45 minutes to install. Instructions should state that the rubber exhaust hangers in the MIDDLE of the car need to be disconnected to get the muffler down far enough to drill the front hole on the passenger side. Other than that, great fit, nice quality.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kevin
5/5/2019
I remain happy with my trailer hitch purchase.