To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Average Customer Rating: 5.0 out of 5 stars (6 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.Hitch arrived on-time and was packaged fairly well. You will need a full 100pc socket wrench set or specifically purchase the socket for these larger bolts as well as a 6 - 8" extension. I held the hitch in place and used a floor jack to take the weight of it. Made installation not too painful and I finished in under an hour by myself.
I ordered a Draw Tight but received a Reece, don't know what's up with that but the hitch was well made and fit as it should.
This part fit my 2000 Rodeo perfectly. However, my particular install was a p.i.t.a with this car. The exhaust is blocking the right side of the hitch from aligning easily with the mounting holes. So, you have to come in at a weird angle to clear the exhaust. But, you will scrape the exhaust mounting hook. It's just cosmetics so I didn't care. But, if you care, make sure to remove your exhaust before the install. The hitch felt like it weighed 80-100lbs. So, imagine laying on the ground and bench pressing that hitch trying to get your first bolt in. I had a chair underneath the car so one side of the hitch can rest on it while I lifted the other side to put in the first bolt. The bolts fit in perfectly if the hitch is properly aligned. I love it when bolts just push into place. Now, I've never torqued a bolt to 150ft-lbs before. Three of the six included bolts have to be torqued to that spec. I did it myself but it was a struggle and few resting moments. You may need an extra arm to help you. My arms are still sore as I am typing this review. On the passenger side of the car, three of the lower spec torque rated bolts needed to be installed. Remember I didn't remove the exhaust? The exhaust pipe just so happens to block the second mounting hole. I had a partner pull the exhaust away while I was under the car tightening that bolt. It was only a 58ft-lb torque spec but I had no leverage being under that car laid down. It was a p.i.t.a! But, at least it wasn't one of the 150's haha. As for the last bolt that needed to run thru the frame to the last hole, the kit don't come with a wire. I used a metal hanger and 10lb fishing line to pull that bolt thru the frame. So far, I'm happy with the product. Again, this is for a 2000 Rodeo. My experience may not be the same for you and your particular car.
I've been under my car a few times before but I was still a bit nervous about being able to this hitch on my car. It took some time but I'm really happy with how the hitch fits, looks, and functions. The directions are really straight forward, but with my 1999 Isuzu Rodeo (with the spare on the back, not underneath the car), I had to pull the rear bumper up to access the inside of the frame which was a bit tricky. Once we got that figured out, putting the hitch in took some banging with a hammer to get it fitted to the towing hook and some creative work of a hanger and double sided tape. Overall I'm happy with the product and would definitely recommend someone to this site and to this hitch again.
Trailer hitch arrived in timely manner. Really only took 30 - 45 minutes to install. Fit perfectly.... very good instructions. If ever need hitch for other vehicle will certainly be a return customer. I would recommend to friends and family !
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gary M.
11/25/2019
I have nothing but good things to say about this hitch, its great!