Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13322
Our Price: $184.94
Confirmed to Fit
2007 Chevrolet Silverado New Body
1500
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (830)
- Q & A (0)
- Photos
2007 Chevrolet Silverado New Body - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- 2 Inch Hitch
- Class III
- 6000
- Visible Cross Tube
- CURT
- 600
- 10000 lbs WD GTW
- 1000 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Chevrolet Silverado New Body's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 6,000 lbs
- Maximum GTW when used with weight distribution: 10,000 lbs
- Maximum tongue weight: 600 lbs
- Maximum TW when used with weight distribution: 1,000 lbs
- Maximum gross trailer weight: 6,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13322 Curt Class 3 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Tech Tip
Product not intended for vehicles with roll pan bumper, Tommy Gate lift, or 10" drop bumper. No drilling required for installation , Trimming of the fascia may be required for hitch installation. Check fit first, per instructions, to see if necessary
Complete Towing Package for 2007 Chevrolet Silverado New Body
Package Price:$250.30
2007 Chevrolet Silverado New Body Owners Who Purchased This Trailer Hitch Also Bought...
Popular Silverado New Body Trailer Hitch Accessories
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13322
Average Customer Rating: 4.9 out of 5 stars (830 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Scott B.08/31/2017
2012 Chevrolet Silverado
I opted to purchase a Curt trailer hitch for my truck. Sheila took my order over the phone and made sure I had the right product for my 2012 Chevy Silverado. Great service. I received the hitch in perfect condition. Watched the installation video and it went on just as easy as I expected it would. Great product and a great price with free shipping. I highly recommend etrailer.com for anyone who needs a great reliable product supplier. Thanks again!
by: Sean07/13/2022
I ordered this hitch in May. It took a couple of weeks to ship. I contacted etrailer and like most companies in this day and age, help is tough to come by. Once the item shipped, I received it very quickly. Installation wasn't difficult. My truck is 10 years old, so I really thought the old bolts would give me a hard time. They weren't too bad to remove. The new hitch went on quite easily. My truck is a 2012 Silverado 1500
Sean
7/14/2023
A year later hitch is great!
by: Kennie05/09/2023
2001 Chevrolet Silverado
hitch looks great, it was easy to install on my 2001 Chevrolet Silverado, no drilling required.
by: Justin07/29/2018
2000 Chevrolet Silverado
Seems like a good hitch . If my bumper wasnt a bit out of wack it would have mounted right up after some banging on the bumper it went right on even around my dual exhaust, So Happy. Shipping was fast and as described and a great price. Can't wait to tow my new travel trailer.
Justin K.
7/29/2019
Works great, towing my travel trailer
by: John R06/21/2013
2011 Chevrolet Silverado
Received the hitch wednesday and installed it thursday. The install went great, I took my time and installed it in about a little over an hour. Everything aligned properly, and fit like a glove on my 2011 Chevy silverado. Glad I got the curt hitch, it looks beefy and heavy duty, like a factory install. Glad I installed it myself, the dealers around here want about $500 to install the whole deal. Watched your install vids, they were very helpful. Googled trailer hitches on the internet and you guys came up, so I thought I'd give you a try. Completely satisfied doing business with etrailer.com. Shipping was fast, price was right. Here's a few pictures. Thanks Guys, John
by: Eric 04/25/2024
2008 Chevrolet Silverado
Really pleased with product. Arrived timely, bolted right up to my truck with little effort. I have used it a couple times a week for a year and it has held up very good. Would buy again.
by: Ed08/23/2020
2007 GMC Sierra New Body
Just installed the Curt Trailer Hitch Receiver to my 2007 GMC Sierra New Body Style and it went smooth. This replaced an old rusted out OEM hitch receiver and the Curt fit like a glove. I was able to install it on my own with the help of a floor jack raising it up in the middle and finger tightened the two bolts under the bumper then bolted up the rail bolts. I then removed the floor jack and torqued down all the bolts slid in the Curt ball mount and secured it with the included pin and cotter pin and I was back to towing my Waverunners to the harbor for some fun.
by: Edd T.06/16/2018
2007 Chevrolet Silverado
My 2007 Classic Silverado Crew Cab 4x4 did not have a factory hitch receiver, so I selected the 13322 Curt Hitch Receiver because it closely resembles the OEM hitch receiver and attaches to the bottom of the bumper. Installation was easy, as shown in the videos and described by other reviewers. All holes aligned perfectly. I did not remove the spare tire as it is not necessary. I used two jack stands to raise/support the receiver frame in place while I started the first bolts. I had the 22mm and 19mm sockets needed to tighten and torque the bolts/nuts. It looks great and I now am able to tow.
For the wiring I installed the 30955 Hopkins 7-Way and 4-Way Trailer Connectors to the bumper adjacent to the license plate. This required drilling a 2-1/8" hole in the bumper, which was time consuming, but it now resembles a factory installation. I was able to remove the license plate and connect to the factory plug.
I ordered these parts from etrailer for a number of reasons: 1) The website is intuitive and contains a tremendous amount of information for the person who is trying to research product information; 2) the selection and inventory is amazing; 3) the prices are very competitive – free shipping for orders over $99; and 4) the dedicated customer service is outstanding – the email communication is prompt. I ordered on a weekend and it was delivered by the following Friday.
A very positive first experience.
by: FOPMAN12/04/2015
Lexus
The customer service Rep: Lexus G. was extremely helpful in directing me to exactly what I needed! Upon receiving the package, I was impressed with the way that the items where protected for shipping. The overall quality of the Hitch and Trailer Connector Socket where impeccable. The entire removal and installation of both units took no more than 35 Minutes. Thanks to to instructional Video!
I am Very impressed with the Company, Service and most of all the Hitch and Light Connector. Thank You so very much eTrailer for everything.
Frank "D"
by: Scott04/19/2018
2008 Chevrolet Silverado
I recently was getting ready another season of towing my boat and landscaping equipment. I inspected my trailers and all the lights. While installing the receiver into the hitch I noticed a small hole in the hitch frame. After further investigation I noticed the hitch was in bad shape. I looked around at different hitch suppliers and found etrailer. Great price great service. All hardware included installed myself.
Thank you
by: Terry 05/19/2024
2012 Chevrolet Silverado
Delivery was slightly earlier than indicated. Packaging was separated from the stapled section, then taped up (most likely a shipping company issue).
by: Gary10/01/2021
Perfect fit, easy install, nothing else to say! My original hitch rusted out great replacement.
Gary
10/2/2022
The hitch is a perfect replacement would recommend to anyone needing a hitch
by: Pete06/09/2017
2003 Chevrolet Silverado
Ok so I received it in 3 days which is great for free shipping and the next day the wife and I got off work at 2 where she went to get grand kids from day care and I went home to put on hitch. Got home and took out tools, got myself a talk glass of ice water because it's 107 here in AZ and dropped tire, took ball off bumper, and bolts off frame and installed new hitch. I put tire back under truck and was rolling with trailer on just before 3 and even before wife got home. Very easy and fit great. Can not beat the cost for this being so easy.
by: Bill G.04/10/2020
Excellent replacement for a factory hitch or for a truck that didnt come with one originally equipped. All hardware included and of nice quality. Instructions easy to follow and clearly printed. No drilling required. Bolts into existing threaded holes in bumper support and bumper brackets where attached to frame of truck. Third set of holes use a carriage bolt, large washer and nut through and existing hole in frame near the leaf spring mount. Threads in bumper support may need rust cleaned out with a tap (14mm x 2.0 thread pitch) if a factory hitch was not installed and truck has lived in the rust belt states. Some minor trimming was required of the bumper plactic covers on my particular application. A sawzall or a hacksaw with a fine tooth blade works great and leaves a clean cut. Otherwise installation time was about 20 to 30 mins using air tools and a lift. Product price and shipping was great, recieved hitch packaged nicely and undamaged within a few days of placing order.
by: Tyler M.10/13/2017
2006 Chevrolet Silverado
Super fast shipping especially with it being free shipping! Hitch Arrived on the day it was scheduled and I had it installed in about forty-five minutes along with the trailer wiring kit. I plan on using it this weekend to tow my camper to the beach. Everthing looks great. Thank you guys for your promt service!
by: Charles C.04/01/2016
I called in my order as I still like to talk to a sales person rather than online, it was quick and professional. My hitch shipped for free and arrived within 4 days. I went to mount it and it didn't line up and I was mad, then I remembered backing into a post years ago pushing in the bumper a half an inch. I grabbed my sledge hammer and resolved the issue. My hitch then was simple to mount and friends perfectly! Thank you!
by: Charlie11/16/2016
2002 Chevrolet Silverado
Recently bought the curt pn 13322 for 02 ecsb silverado. Packaged well, exxtremely good quality, was a pain to install due to bent bumper and one bolt broken off from previous owner but not etrailer.com fault. Pulled a 20 ft car hauler today and checked it afterwards, no issues whatsoever. Would definitely recommend. Check your bumper alignment prior to install.
by: Douglas01/13/2018
2004 Chevrolet Silverado
I ordered this hitch late in the day on Jan 10th. I received it on Jan 12th just after noon. I was told it would likely take 4 business days. It took less than 48 hours and was shipped for free. I am not a mechanic but the installation took only about 20 minutes. Total cost for the hitch and electrical connector was much less than the quote I received from a local company to install the same hitch. Awesome hitch, awesome deal, awesome company. I am now a huge etrailer.com fan now!
by: Mike 04/15/2024
great company
by: Jeffrey 04/19/2024
2013 Chevrolet Silverado
Good job!!. Fast work on getting order out.UPS was a little slow but in all very satisfied.
by: Cm04/18/2024
Great fit for Chevy Silverado and shipped immediately
by: Chris08/03/2018
2003 Chevrolet Silverado
Trailer hitch and wiring kit showed up on time great product ,great price ,easy to install. Trailer hitch and wiring only took 20 minutes to install. My beer didn't even get hot before I was done.
by: Denny R.08/03/2011
2001 Chevrolet Silverado
The trailer hitch for my 2001 Chevy Silverado was exactly as indicated on etrailer.com web site. Very fast delivery service, I was quite pleased. Installed myself in about a hour. Hardest part of the installation was getting the existing two frame bolts loosened and out, after that tne installation went very well. I would definitely recommend etrailer.
by: Mark06/27/2021
2008 Chevrolet Silverado
Quick easy install, once hitch came into stock, I had it very quickly! Customer was happy!
Mark
6/28/2022
Installed this hitch about a year ago, still working good, good finish, and holding up great.
by: Brad12/16/2017
2009 Chevrolet Silverado
Put it on a 2009 Silverado 1500 LT. I had been concerned when looking other places for something compatible with my custom dual exhaust.
The webpage took me RIGHT to where i needed to be. Now it's ALL as it should be, tucked in right above my exhaust! One stop shopping took care of me! Thanks etrailer!
25
830
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- What Prevents Trailer Hitch Install Hardware from Threading into Weldnuts of VehicleI don't know what hitch you have so I can't determine what bolt size you have and therefore the correct thread tap but what you need to do is use a thread tap to clean out the threads so that you can install your hitch hardware. This is a very common problem unfortunately. You could start with the Tap Wrench Kit for Standard Pipe Sizes - Metric - 6 Pieces # PT22FR to determine your bolt size.
view full answer... - New Body or Classic Body on 2007 Chevy Silverado with No Bowtie on Tailgate and No Amber Turn SignalFrom the picture that you sent in I would venture to say that your 2007 Chevrolet Silverado is the Classic with upgraded tail lights. Although the tail lights and tailgate style are good indicators of the type whether you have the New Body or Classic, you can also check the front. The New Body styles tend to have headlight assemblies that are one whole section while the Classic style has them separated (see attached photos). If all else fails you can always call or take it to a Chevy...
view full answer...
- Weight Distribution or Higher Capacity Hitch for 2006 Chevy Silverado 1500 and 5300lb TrailerCurt trailer hitch # 13322 is rated for 600 pounds tongue weight without weight distribution and 1,000 pounds tongue weight with weight distribution. Gross trailer weight is 6,000 pounds weight carrying but 10,000 pounds with weight distribution. If the trailer weighs 5,300 pounds, and tongue weight is typically 10 to 15 percent of the gross trailer weight, that should make the tongue weight between 530 and 795 pounds. This is not including the weight of anything loaded in the truck behind...
view full answer... - Front hitch for 2004 Silverado SSThe Chevy Silverado SS is built on the 1500 LD frame, as you've found, the Draw-Tite # 65028 is a fit for the 1500HD, and isn't compatible with the LD frame. For the 1500LD, you'd need the Curt # 31302.
view full answer... - Do you carry Curt Class 3 Hitches for my 2001 GMC Sierra 1500We carry both of the Curt Hitches for your 2001 GMC Sierra the Curt Trailer Hitch Receiver part # 13332 which is square tube and the Curt Trailer Hitch Receiver part # 13322 which is the round tube. Of the two I like the square because like you said it is a little more concealed. The installation process will be the same on both of the hitches. The instruction are linked for you to check out. As well as a video my buddy Shane did on a 1999 Silverado which will be identical.
view full answer... - Swing Away Bike Rack Recommendation for 2015 Nissan Rogue and 2006 Chevy SilveradoAs long as you have a 2 inch hitch installed on your 2015 Nissan Rogue like the part # 75902 and on your 2006 Chevy Silverado like the part # 13322 for if you have a 1500 model then yes, the Yakima Full Swing part # Y02465 would fit and work well for you. This rack is great because it can swing away with bikes loaded to give full access to the rear cargo area of your vehicle WITH bikes loaded. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes...
view full answer... - Bolt Hole Spacing for Curt Class III 13322 Trailer Hitch The bolt holes of the Curt # 13322 Class III hitch are 39.37 inches apart center to center for the set of holes closest to the rear bumper and 39.44 inches apart for the set closest to the front of the vehicle as shown in the provided photo. The hitch is a confirmed fit for a 2003 Chevy Silverado 1500. I've linked to an install video showing the hitch being installed on a 2003 Chevy Silverado 1500.
view full answer...
- Is The Curt Trailer Hitch Receiver 13301 A Fit For A 2006 Chevrolet SilveradoWhile we do have a solution for you, the Curt Trailer Hitch Receiver # 13301 is designed for new generation models starting in 2007. My recommendation is the etrailer.com Trailer Hitch Receiver Class III - 2" # e98849 for your 2006 Silverado because the matte black finish tends to be more scratch resistant than the glossy finishes like that of the Curt. Included are video resources for both.
view full answer... - Does Curt Trailer Hitch # 13322 Fit 2005 Chevy Silverado 1500 StepsideFor your 2005 Chevy Silverado 1500 stepside the Curt hitch part # 13322 is a confirmed fit that will work well. I attached an install video for this hitch for you to check out as well.
view full answer... - Availability Of Replacement Hardware For Curt 13322 For A 2003 Chevy SilveradoHello Renee. It sounds like you are looking for a replacement hardware kit for the Curt Class 3 Hitch # 13322 for a 2003 Chevy Silverado. We can provide a hardware kit with part # RHK. Once you go to the page for the # RHK there will be a box where you enter the part number for your hitch. In this case you will enter the part number 13322 in this box before adding to your cart. This will get you a complete hardware kit for installing your hitch.
view full answer... - Does Curt Hitch # 13322 Fit 2003 Chevy Siverado 4x4 Short BedYes the Curt hitch part # 13322 that you referenced does fit the 2003 Chevy Silverado 1500 short bed trucks. The install video I attached shows this hitch installed on a 2003 Silverado short bed just like yours.
view full answer... - What Size Bolts Are Used To Secure a Trailer Hitch To the Bumper On a 2006 GMC Sierra 1500In regards to the Curt Trailer Hitch Receiver part # 13322 which is a fit for your 2006 GMC Sierra 1500, the bolts that are used to secure the trailer hitch to the bumper are M14-2 x 40mm hex bolts. Therefore, the weld nuts inside the bumper are M14-2. If you are just looking for a hardware kit for a trailer hitch that you already own then you can use the Replacement Hardware Kit for Trailer Hitches part # RHK to obtain these bolts and the rest of the hardware that you need.
view full answer... - Will Curt Trailer Hitch Fit 2004 GMC SierraI went and took a measurement and found that Curt trailer hitch # 13322 measures 41" all the way across where it mounts to the frame. This hitch will fit a 2004 GMC Sierra 1500 or 2500LD. If you have a different model Sierra let me know and I can find the correct fit for you.
view full answer...
- Identifying Hardware Included with Curt 13322 Class III Trailer HitchThe Curt # 13322 Class III hitch uses a total of 6 bolts, two 1/2 inch carriage bolts and four M14 bolts. The 1/2 carriage bolts have a smooth round head on them, while the M14 bolts have a hex head on them so they can be tightened with a wrench. I've provided a diagram showing the difference between the two types of bolts that shows precisely where they're installed. I've also linked to an installation video that you may find helpful.
view full answer...
- What is the Towing Capacity of a 2004 Chevy Silverado 1500 with 4.8 LiterThe towing capacity of your 2004 Chevy Silverado 1500 with 4.8 liter motor will depend on several factors including the bed length, cab style, rear end ratio, transmission type, and whether it is 2-wheel or 4-wheel drive: 2-Wheel drive models: Regular cab, short box, automatic, with 3.42 rear end = 6,500 pounds; long box = 6,300 pounds Regular cab, short box, automatic, with 3.73 rear end = 7,500 pounds; long box 7,300 pounds Regular cab, short box, manual, with 3.42 rear end = 4,500 pounds;...
view full answer... - Comparing Curt Trailer Hitches 13322 and 13332 For 2006 Chevy Silverado 1500That's a really good question, and there are a couple of differences between the two Curt hitches that fit your 2006 Chevy Silverado 1500, the round tube Curt Trailer Hitch Receiver # 13322 and the square tube Curt Trailer Hitch Receiver # 13332. The first difference is that the square tube hitch is going to be more concealed, as the tube is straight and going to be hidden behind the bumper more, while the round tube will stick out and the tube will be far more noticeable under your truck....
view full answer...
- Replacement Hardware for Curt Hitch on a 2002 Chevy SilveradoYes! To replace the installation hardware for the Curt Trailer Hitch Receiver # 13322 on your 2022 Chevy Silverado you'll need the part # RHK on our site. Just fill out the information about what hitch you have and we'll send you the hardware! Attached is an installation video of this hitch on a 2002 Chevy Silverado for you to check out.
view full answer... - Trailer Hitch Receiver Fit For 2003 Chevy Silverado 1500 HDWe don't specify between the 1500 and 1500 HD in terms of fit in our guide, but I did check with our manufacturers for you to verify the fits for a trailer hitch receiver on your 2003 Chevy Silverado 1500 HD. The correct fit is going to depend on your bumper, so you'll want to keep that in mind. I'll go ahead and list out the options for you, and each hitch has a 2" receiver: - Standard Bumper: Curt Trailer Hitch Receiver - Class III - 6,000 lbs Towing/600 lbs Tongue Weight # 13322 -...
view full answer... - Trailer Hitch Rated for at Least 8,000 Pounds for a 2000 Chevy Silverado or C/K Series 1500For the 2000 model year Chevy trucks there was both an actual Silverado model and C/K series models with a Silverado trim option. For an actual Silverado model, 1500, I recommend Curt hitch # C14332 rated for 1,000 pounds tongue weight and 10,000 pounds gross trailer weight when NOT using weight distribution. When using weight distribution it is rated for 1,200 pounds tongue weight and 12,000 pounds gross trailer weight. If your truck is a C/K series 1500 then I recommend Curt hitch...
view full answer... - Will Curt Trailer Hitch Receiver # 13322 Fit with Spare Tire on 2011 Chevy Silverado 1500The Curt Class III Trailer Hitch Receiver # 13322 referenced in your question is confirmed to fit your 2011 Chevy Silverado 1500 and will fit with the spare tire as long as it is the stock/factory size. If you have changed out the original spare tire with a larger size, it's possible that it will not fit with the hitch installed. I confirmed this with my contact at Curt. The stock spare tire will need to be removed temporarily during installation but can then be reinstalled once the hitch...
view full answer... - Trailer Hitch that Fits Tight Against Bumper on a 2011 Chevy Silverado 1500The B&W hitch # BWHDRH25217 receiver would sit a few inches below the bumper on your 2011 Chevy Silverado. The Class V hitches for the 2011 Silverado 1500 are like that with the other option being Curt hitch # C15323, see video. Curt has a Class III hitch, # 13322, that fits up tight against the bumper. I have linked a video showing installation for you. Draw-Tite also has an option, # 75521, and I have linked a video for this hitch as well.
view full answer... - Trailer Hitch that Fits Right Under the Bumper on a 2009 GMC Sierra 1500Yes. The "C" in front of the part number, # C15323, is just how we designate it as a Curt part. The Class IV and V trailer hitches available for your 2009 GMC Sierra 1500 all set at approximately the same location. That is to say with a minimal, if any, gap between the receiver and the bumper. The Class III hitch # 13322 sits up tighter against the bumper, see the linked video, but as a Class III it isn't rated as high as a IV or V. The higher Class hitches are beefier so they may need...
view full answer... - Dimensions of Curt Trailer Hitch part # 13322The distance from left to right on the Curt hitch part # 13322 between the mounting holes on center is 35-5/8 inches and the distance from the mounting surface down to the top of the hitch opening is 5-1/2 inches.
view full answer...
- How Much Can a 2005 Chevrolet Silverado 1500 Z71 with the 4.8L Engine and 3.42 Gears TowYes, the 2005 Chevrolet Silverado 1500 that you are looking at has a 6,700 lb towing capacity so long as it has an automatic transmission but if it has a manual transmission then it will only have a 4,700 lb towing capacity. If you look at page 4-76 in the owner's manual for a 2005 Chevrolet Silverado you will see the figures that I referenced.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Robert C
Test Fit:
Ryan G
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Scott B.
9/4/2018
Still in great shape. Cant say enough about etrailer.com. Great product. Great people.