Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

See what our Experts say about this CURT Trailer Hitch

• Trailer Hitch For 2014 Chevy Cruze To Carry Power Chair
  I recommend the Curt Trailer Hitch Receiver part # C11282 because you have an extra 3/4" ground clearance compared to the other option for the Chevy Cruze. This is important when carrying a cargo carrier because they are less likely to drag the ground in low ground clearance situations. The only hitches available for your vehicle at this time are Class I hitches so they are not rated for a lot of tongue weight and the wheelchair carrier and wheelchair are both considered tongue weight...
  view full answer...
• Hidden Curt Hitch that Fits 2015 Chevy Cruze LTZ
  The Curt hitch part # C11282 does fit your 2015 Chevy Cruze LTZ and would work great. We also have the Draw Tite part # 24882 which also is a fit and made by a different company so it has a slightly different design. Either hitch would work great but if it were me I would go with the Curt as we generally have the best luck with their hitches in terms of quality and performance.
  view full answer...
• Can a 2013 Buick Verano Carry a Hoveround Scooter on a Trailer Hitch
  If by pulling it you mean towing the Hoveround on a trailer then your 2013 Buick Verano could handle that. But if you mean having the Hoveround on a hitch-mounted carrier and off the ground then it depends. Both of the trailer hitches that fit your Verano ( # 24882 and # C11282) are Class I hitches with a tongue weight capacity of 200 pounds. Tongue weight capacity is the amount of weight that can be suspended from the receiver. So the combined weight of your Hoveround and the carrier...
  view full answer...
• Difference Between Curt Hitches that Fit 2015 Chevy Cruze C11282 and C11425
  There are some subtle differences between Curt trailer hitches # C11282 and # C11425. The receiver is longer on # C11425 so it stick out further and they don't have all the same vehicle fits. Hitch # C11282 fits the 2011 to 2015 Cruze excluding diesels models, 2016 Cruze Limited models, and the 2012 to 2017 Buick Verano excluding turbo and dual exhaust models. Hitch # C11425 fits 2016 Chevrolet Cruze Limited models and 2015 Chevrolet Cruze models except for the diesel models. If it were...
  view full answer...
• Which Trailer Hitch Is Recommended For A 2013 Chevy Cruze
  The 3 trailer hitches we currently offer are Class-I rated and will fit your 2013 Chevy Cruze. Unfortunately, Class-II trailer hitches are not a fit for your 2013 Chevy Cruze. At the moment, the most popular trailer hitch is the Curt # C11282. It is custom fit for your Cruze and has a maximum gross trailer weight of 2,000 pounds and maximum tongue weight of 200 pounds. I also included a link showing all 3 custom fit trailer hitches too. If you will be doing some light duty towing with...
  view full answer...
• Does the Curt Hitch part # C112821 Come with All Necessary Installation Hardware
  The Curt Hitch part # C11282 that you referenced comes with everything needed to install the hitch on your 2013 Chevy Cruze. It comes with 4 square hole spacers, 4 carriage bolts, 4 flange nuts and a 7/16 inch pull wire. I attached installation instructions plus an install video for you to check out also. This hitch comes with a ball mount and ball plus a pin and clip, so to complete your towing setup you may also be interested in the Curt Wiring Harness part # C56214.
  view full answer...
• Can the Yakima HoldUp EVO be Used with Class I Trailer Hitch on a 2013 Chevy Cruze
  The Yakima HoldUp EVO # Y02480 is an excellent bike rack that I believe you'd be happy with but I do have to say that it is 50 lbs. When I looked up the online version of the owner's manual for your 2013 Chevy Cruze it stated that the max trailer weight for your vehicle is 1,000 lbs and that the max tongue weight is 10% of that (100 lbs). So even if you're using the Curt Trailer Hitch # C11282 which has a 200 lb tongue weight rating, you are limited to the 100 lbs. If your bikes don't weigh...
  view full answer...
  
• Recommended Hitch Mounted Cargo Carrier For 2014 Chevrolet Cruze
  We have a video of the Curt Hitch part # C11282 being installed on a 2014 Chevrolet Cruze and the distance from the center of the hitch pin hole to the back of the rear bumper is 6-1/2 inches. We'll use that dimension when recommending a cargo carrier that will work for you. I have attached a helpful article that explains how this measurement is taken. The hitch has a tongue weight capacity of 200 lbs. The hitch-mounted cargo carrier I recommend is the Curt Hitch Cargo Carrier, part #...
  view full answer...
• Compatibility of Curt Class I Receiver # C11282 on 2012 Chevy Cruze with RS Package
  According to Curt Manufacturing, the # C11282 is compatible with all models of the Chevy Cruze, including those equipped with the RS package. If you will be using the hitch for a bike rack or a cargo carrier, keep in mind that the warranty requirements of the hitch require that a stabilizing strap like part # 18050 is required. The Draw-Tite hitch, part # 24882 has no such requirement, which is why I would recommend it over the Curt model. I have linked you to installation instructions...
  view full answer...
• Recommendation for Small Trailer to Haul Furniture with 2014 Chevy Cruze
  A small utility trailer like the K2 Mighty Multi A-Frame # K2MMT5X7 that we offer would be a great choice for you. The trailer weighs around 450 bs, which would leave lots of capacity available for cargo. The trailer is extremely versatile, with removable sides and a folding front and rear tailgate for tons of carrying options. The Curt # C11282 hitch you'd looked at would work perfectly, and for a wiring harness I'd recommend # 118508.
  view full answer...
• Best Trailer Hitch for 2013 Buick Verano
  If you do not have the Turbo and Dual Exhaust models I would go with the Curt Trailer Hitch Receiver # C11282 mainly because according to our website the install difficulty is easier on this one than the Curt Trailer Hitch Receiver # C11282. They both have the receiver opening of 1-1/4" x 1-1/4" and the weight rating of 200lbs TW and 2000lbs GTW. You will also need the Draw-Tite Drawbar for 1-1/4" Hitches # 3593 rated at 2000lbs and the Pin and Clip # PC2. If you are looking for a hitch...
  view full answer...
• Are There Any 2" Trailer Hitch Receivers Available For A 2012 Chevy Cruze
  Unfortunately, the only trailer hitch receivers that our vendors currently offer for a 2012 Chevy Cruze are Class 1, which only come with a 1-1/4" receiver tube like the Curt Trailer Hitch Receiver # C11282. You be able to haul a bike on the Cruze you would need to either switch to truck mount style rack, like the Yakima FullBack 2 Bike Rack # Y02634, or use a bike rack designed for a 1-1/4" receiver tube.
  view full answer...
• Will the Thule OutWay Fit a 2011 Chevy Cruze
  According to our friends at Thule, the OutWay 3 Bike Rack, part # TH56BV is a fit for your 2011 Cruze. The attachment hooks on the OutWay are completely coated in soft plastic, and if adjusted and installed correctly will not further scratch the finish on your vehicle. For ease and speed of installation and removal, the Raceway is the best trunk-mounted bike rack we offer. When installing the rack, Thule specifically states that the bottom mounting hooks need to attach to the metal bumper...
  view full answer...
• Curt or Draw Tite Hitch Recommendation for 2013 Chevy Cruze
  The mounting brackets of the Curt Hitch part # C11282 are much bigger than the Draw Tite hitch part # 24882. That is the weight difference. If it were me I would go with the Draw Tite. It has a better price, the same capacities, doesn't require a stabilizer strap like the Curt does with non-supported loads, but also because the lighter weight will make it easier to install. For trailer wiring you would want the part # C56214, for a ball mount part # 3593, and then for hitch balls part...
  view full answer...
• Hitch Installation on 2013 Chevrolet Cruze and Use of Hitch-Mount Bike Rack
  Three hitches are offered for your 2013 Chevrolet Cruze, including the Curt # C11282 that you referenced. All are light-duty 1-1/4-inch Class I types that can carry up to 2 bikes (no matter what the bike rack's capacity is). All will install in an essentially identical manner since they all will use the same mounting points on your Cruze's frame. The link provided will show you all three. Two of these, the Draw-Tite and Hidden Hitch models, are both made by the same company, Cequent Performance...
  view full answer...
• Hitch and Bike Rack Recommendation for 2014 Buick Verano Turbo
  There is a hitch available for your 2013 Buick Verano Turbo, check out the Curt Hitch part # C11282. I attached an install video for you to check out. With this hitch you can install a Class I rated hitch mounted bike rack, but you will also need to use a stabilizer strap like part # 18050. I attached a review video for you to check out for this product. The most popular hitch bike rack with other Verano owners is the Thule Doubletrack Bike Rack part # TH990XT. I attached a review video...
  view full answer...
• Does Curt Wiring Harness for 2014 Buick Verano Have Wire to Run to 12 Volt Battery
  Yes, the Curt T-Connector Vehicle Wiring Harness # C56288 does come with the necessary wire to run a hot lead to the battery of your 2014 Buick Verano, so you will not need anything else to install a 4-way. I have added a link to a video review for you to check out as well of the Curt Wiring Harness # C56288. I do recommend adding Dielectric Grease for Electrical Connectors # 11755 to help prevent any type of corrosion in your connector; using it will increase your 4-way's durability...
  view full answer...
• Will Trailer Hitch Options for 2011 Chevy Cruze Fit ECO Model
  Both the Draw-Tite # 24882 and Curt # C11282 trailer hitches are confirmed to fit all models of the 2011 Chevrolet Cruze, including your ECO. In fact, we have a customer review that was sent in where they installed the Draw-Tite hitch on their ECO model and it took them about 30 minutes! Out of both options I recommend using the Curt hitch # C11282 for your application. Although you need to use a Support Strap # 18050 for all non-trailer loads, it does not have a weld stop in the hitch...
  view full answer...
• Trailer Hitch Recommendation for a 2016 Chevy Cruze
  The Curt hitch part # C11282 that you referenced has been confirmed as a fit for your 2016 Chevy Cruze so I would recommend it for your. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info. Curt requires the use of their stabilizer strap part # 18050 when using their hitch to carry a non-supported...
  view full answer...
• Advisability On Using Extensions With a Tow Bar
  Although it would seem like an ideal way to carry the items you wish to carry, I spoke with my contact at Roadmaster and they told me that they strongly advise against adding additional extenders to the hitch. Adding the reducer on your receiver does not reduce the towing capacity, but the double receiver does. Normally, adding extensions to your receiver reduces the towing capacity by 50%. Adding an additional extension would certainly reduce the towing capacity by another 50%. With that...
  view full answer...
• Comparing Curt Trailer Hitch Receiver # 11282 to # 11371 for 2014 Chevy Cruze Fit
  The Curt # C11282 for gas models of the Chevy Cruze and # C11371 for diesel models of the Chevy Cruze are identical in the mounting locations. The difference is in the drop of the # C11371 for diesel models is 5-1/4 inches for exhaust clearance compared to the drop of the # C11282 being 3.88 inches from the mount to the top of the receiver tube according to my contact at Curt. The gas model will give you better ground clearance and will only work on the gas model where the diesel model...
  view full answer...
• Availability of Hitch Installation Video for Curt Hitch # C11282 on 2013 Chevrolet Cruze
  We do have an installation video to show you the process of mounting Curt hitch # C11282 on a 2013 Chevrolet Cruze. The video is linked for you. I also included a helpful article that provides additional tips for an easier installation. The written instructions for the hitch are also linked for you and you can review these to see the list of tools required, which include basic hand tools as well as a torque wrench like # ALL944001.
  view full answer...
• Trailer Wiring Kit Availability for a 2016 Chevy Cruze
  We have trailer wiring confirmed as a fit for your 2016 Chevy Cruze, but it is a universal kit that will require hardwiring for installation. You would want the part # C59236 which has been confirmed as a fit.
  view full answer...
• What Vehicles Does The Curt Trailer Hitch Receiver C11282 Off My 2011 Chevy Cruze Fit?
  The Curt Trailer Hitch Receiver # C11282 you purchased from us a few years back fits the 2011 - 2015 Chevy Cruse excluding the Diesel models, along with the 2012 - 2017 Buick Verano excluding the Turbo and Dual exhaust models. Keep in mind that the mounting hardware included with the hitch is only designed to be used once, so you will also need the Replacement Hardware Kit # RHK. Just select Curt from the manufacturer menu and then enter 11282 in the hitch item number field. I included...
  view full answer...

Do you have a question about this Trailer Hitch?