THIS ITEM IS NOT A FIT FOR
2019 Ford F-250 Super Duty
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13050
Retail:$587.05
Our Price: $299.75
You Save: $287.30
2019 Ford F-250 Super Duty
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (44)
- Q & A (0)
- Photos
CURT Trailer Hitch - C13050
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Visible Cross Tube
- CURT
- 350 lbs TW
- 5000 lbs WD GTW
- 500 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 5,000 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 500 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13050 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2004 - 2006 Cadillac SRX
- 2007 - 2009 Cadillac SRX excluding Sport Package models
- 2007 - 2009 Cadillac SRX Sport Package models
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Did not arrive in time
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13050
Average Customer Rating: 4.8 out of 5 stars (44 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Dwaine11/15/2022
I was told it would take a week to deliver, it was delivered in 4 days. Excellent service from etrailer. The product fit perfectly, no problems whatsoever. Will do business with etrailer again and again.
by: joydenze12/26/2012
2008 Cadillac SRX
My husband & son installed this hitch on our '08 Cadillac SRX. I was told that the instructions were very good & that the installation went smoothly. Took these 2 car guys about 2 hours & that it was very straight forward. No extra trips to the store... They only had to cut a couple of things that were supposed to be cut according to the directions. No other modifications needed. Hubby says the rear end is now wonderfully tight. Appearance of the hitch is handsome. It all bolted in & they were very pleased with the quality of the product. Top notch. etrailer's service is outstanding & the expedited delivery was well worth the extra couple of dollars for our purposes.
by: Steve B05/24/2017
2009 Cadillac SRX
I was able to install this by myself on a Cadillac 2009 SRX.
1. If you use straps to hold up the mufflers try not to use the hole on the outside of the frame. They may not come out due to the hitch once being installed it is in the way.
2. Use jack stands to hold the hitch up. Then you can do the final life by hand and start the bolts.
3. Clean out the bolt hole before you try to lift the hitch into place. I used an old style battery terminal cleaner tool. I also bought a bolt and cut four grooves in it to clean out the threads in the frame. Got the idea from this site.
Once installed the hitch blends into the black car and looks good.
by: Ricardo08/14/2018
2007 Cadillac SRX
Fit perfectly and the shipping time was excellent. Saved time and money by shopping with etrailer. Trust me, I definitely researched the prices. Definitely going to be a returning customer.
by: Brian I.08/17/2014
2006 Cadillac SRX
Hitch fit good.I like the fasteners and instructions came with it. I should have paid more attention to how far past the bumper it sticks out. Not a fan of bruised legs!
by: Stephen Bothel05/11/2017
This hitch was ordered for a customer to hook her bike rack to
it arrived in a timely manner from your company and the fit was very good I had no problems with exhaust rattle and the hardware kit had all the parts to install it
The job looked neat when finished and my customer was happy with the work and how it looked
by: Kevin M.12/03/2011
2006 Cadillac SRX
I installed this by myself laying on my back with the car (2006 Cadillac SRX) up on wheel ramps. It was easy. But, I spent most of the time cleaning out the weld nuts which were very rusty and dirty. Be sure to thoroughly clean the weld nuts this because it will make the bolts screw in much easier especially if you are trying to hold up the hitch at the same time. The online installation video really helped. Very well built quality product and HEAVY. Shipping was fast. Very satisfied.
by: Jw11/19/2019
2009 Cadillac SRX
Put it on my 2009 Caddy SRX and it fit perfect. The 2004-2009 SRXs are a tricky fit, the exhaust has to be lowered and the hitch slid in so thank goodness that all the bolt holes in the hitch lined up perfectly with the factory drilled and threaded holes in the frame.
by: Eric N.04/03/2018
2004 Cadillac SRX
I had access to a lift which made the installation a lot easier. A friend and I put it on my 2004 Caddy SRX in an afternoon with very little problem. The instructions were very good and was a stress free process. Thank you
by: 2007 SRX07/04/2012
2007 Cadillac SRX
Hitch fits and looks good. However, the metric bolts provided with the hitch did not fit the vehicle. It needed SAE bolts instead. Had to make trip to the hardware store. eTrailer had incredibly fast free shipping. Very satisfied with their service.
by: Kenneth W.05/28/2018
2005 Cadillac SRX
The hitch is well built and fit perfectly. The installation was easy and completed in just a few hours. After using it for a year there have been no problems. I'm completely satisfied. Another great product from etrailer !
by: Allan09/05/2012
2008 Cadillac SRX
Product is well built and bolts up as mentioned. Note: On the 2008 Cadillac SRX, the lower muffler bolt taps out with a hammer. No cutting lower bolt is required, so removing the entire muffler bracket is not required which saved about 20 minutes on the installation.
Customer service was excellent, and the shipping turn around time was great also. Will order again from etrailer!!!!
by: Randy S.03/12/2015
The shipping was very fast and the product looks great. I have not had time to install but after watching the video the installation looks straight forward. Warmer weather will be here soon and using the trailer hitch for our bike rack will make bike riding fun.
by: Steve10/05/2020
Yeah...why have I ever paid anyone to install one of these for me? This was not at all complicated. Part came as promised, got it installed faster than I thought I would and the video was super useful.
by: Larry Spurlock10/12/2012
Product arrived ahead of schedule thanks to the shipping upgrade I received which was greatly appreciated. Installation took a little longer than the instructions said but I'm 63 so everything takes a little longer than it used to plus I was laying on my back most of the time and kept falling asleep. Instructions were accurate and easy to follow. My only complaint was that the receiver once mounted extends out past the rear bumper a little and it could be a shin knocker. Other than that it looks good. No pictures available at this time.
by: Aaron07/14/2018
Product was as advertised. Detailed installation instructions included, would purchase from them again.
by: David D.08/19/2013
2004 Cadillac SRX
Speedy service and it installed like the video said. This is my third trailer hitch and everyone was the same.
by: Greg M.05/29/2012
A very good product at a very good price. Install was easy once weldnuts were tapped to clean out. Hitch cover is cheap and a sloppy fit.
by: Kyle I09/27/2015
Perfect fit, all hardware needed was included. Although difficulty rating was a 10 for my application, the available videos walked me right through the installation.
by: Dave C06/08/2013
2008 Cadillac SRX
This worked like a charm on my 2008 SRX, but I would highly recommend getting a M12x1.75 tap to clean out the threads. The brush alone still makes it hard. After I used the tap to clean the threads I was able to just use my fingers to get the bolts in to the point I used a pneumatic ratchet just to tighten down to 60 psi.
by: Wolfgang 05/12/2021
Installed by myself,no problems at 74. Just have a couple blocks for support.
by: Connie 07/25/2021
I am overwhelmed at E-trailers fast shipping and great customer service i highly recommend them.
Thank you so much
by: R Walker09/13/2013
2006 Cadillac SRX
this to package was made of 3/8 steel plate and heavy steel tubing. to me it was well worth the price. the paint job was great and if it was perfect. easy install. I received the package quickly. Thanks
25
44
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- What is the Difference Between Curt C13050 and Draw-Tite 75174 for a 2007 Cadillac SRXThe Curt # C13050 and Draw-Tite # 75174 are very similar in design. The Draw-Tite model isn't listed as a fit for Sport Package equipped models, but the Curt hitch is a fit. If your SRX isn't the Sport model, that won't be a consideration and you could choose either htich. Both hitches have the same capacity and would install in a similar manner. The crosstube and recevier tube of either hitch will be visible under the rear bumper. If you'll be towing with the hitch, you might need the...
view full answer... - Correct Ball Mount for Class III CURT Trailer Hitch for 2004 Cadillac SRX to Eliminate RattleA Class III trailer hitch, like the CURT Hitch, # C13050, for the 2004 Cadillac SRX, does not require a specific ball mount. The one we recommend is # D-4 and Hitch Pin and Clip, # PC3. However, you will want to choose a ball mount based on the rise or drop you need to tow the trailer level. I have included a link to an FAQ article that shows you how to choose the correct ball mount. If you find that even a different ball mount has too much rattle, you can add an anti-rattle device. I...
view full answer... - Trailer Hitch Options for the 2006 Cadillac SRX, CTS, DTS, STS, Escalade and Escalade EXTIf you have a 2006 Cadillac SRX then you can use Curt hitch # C13050 or Draw-Tite hitch # 75174. If you have a 2006 Cadillac CTS or STS you can use Draw-Tite # 24767 or Curt # C11307 which are both Class I, 1-1/4 inch hitches. If you have a 2006 Cadillac DTS you can use # 36287 or # C12058 which are both Class II, 1-1/4 inch hitches. If you have a 2006 Cadillac Escalade or Escalade EXT you can use Class III hitch # C13422 or Class V hitch # C15324. If you have a 2006 Cadillac XLR there...
view full answer... - Recommended Wiring Harness and Other Parts to Tow a Trailer with a 2004 Cadillac SRXThe wiring harness I recommend for your 2004 Cadillac SRX is the Curt # 56146KIT. There isn't a plug and play connector on your Cadillac but this harness will hardwire into the vehicle. The installation details are attached and I've attached an install video as well. If you don't already have a trailer hitch installed I recommend the Curt # C13050. It's custom designed for your SRX and will give you a 2 inch receiver opening. This install video is also attached. You'll also need a...
view full answer... - Recommended Equipment to Tow With a 2007 Cadillac SRXThe Curt Trailer Hitch Receiver # C13050, which is a confirmed fit for your 2007 Cadillac SRX, is a great option for a receiver. To get your Cadillac SRX ready to tow you will also need wiring, a ball mount, and a hitch ball. For a ball mount and hitch ball I recommend going with our Ball Mount Kit # 989900 which comes with 2 ball mounts, a pin and clip, and 1-7/8 inch and 2 inch hitch balls. You will want to measure to make sure that the ball mounts give you the correct Rise or Drop....
view full answer... - Will Curt Trailer Hitch C13050 Fit a Cadillac SRX with Sport Package FasciaI checked with my contact at Curt, and he confirmed that yes, the # C13050 trailer hitch will work on all V8 and V6 SRX models from 2004 through 2009, including those with sport fascia. You can view the installation instructions at the link below, if needed.
view full answer... - Class III Hitch & Weight Distribution System for 2005 Cadillac SRX Towing 5000-lb Travel TrailerBoth the Curt # C13050 and Draw-Tite # 75174 Class III round tube hitches for your 2005 Cadillac SRX share identical capacities and installation steps so between them I'd go for the Curt since it costs a bit less. The phrase 'max frame' is marketing terminology and does not denote any special feature or capability. Hitches with round versus square cross tubes are sometimes considered to have more eye appeal on passenger cars, but this is purely a cosmetic matter. When used with a weight...
view full answer... - Recommended 2-Inch Trailer Hitch for 2009 Cadillac SRXThe 2009 and 2011 model years of the Cadillac SRX are not within the same generation and so their hitch fits are not the same. The 04-09 model years were the first generation, while 2010 and later model years are within the second generation. Links to hitches for both cars are included. You'll note that both 1-1/4-inch Class II and 2-inch Class III hitches are available for both cars. In general we recommend going with the 2-inch option because it will have a higher towing capacity, more...
view full answer... - Trailer Hitch for Hollywood Racks Bike Carrier on a 2006 Cadillac SRXFirst, hitch extender # HE06 is not a hitch, just an extension. It would fit in a 2 inch trailer hitch receiver if your 2006 Cadillac SRX already had one. It is designed to provide an additional 7 inches of clearance from the center of the hitch pin hole. For a 2 inch trailer hitch for your SRX the most popular option is # C13050. I have linked a video showing how it installs. With the hitch installed the distance from the center of the hitch pin hole back to clear the rear bumper will...
view full answer... - Recommended Class III Hitch for a 2011 Cadillac SRX To add a class III hitch to your 2006 Cadillac SRX, I recommend the Curt Trailer Hitch item # C13050. This hitch is custom fit and bolts to your Cadillac with included hardware. This hitch has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. I have linked an installation video below to help you get it set up. If you are planning on towing you will also need a wiring harness item # C59236 and a ball mount kit item # C45534.
view full answer... - Will CURT Trailer Hitch # C13050 Fit a 2008 Cadillac SRX with Sports PackageAccording to our contacts at CURT, trailer hitch # C13050, will fit on the 2008 Cadillac SRX if it has the Sports Package. None of the other hitches we carry are designed to work with the fascia that comes on the sports package models. I have included a link to the installation details for you to view. There is no template available for trimming the fascia. The spare tire will need to just be lowered to install the hitch and raised again after installation. The hitch should not interfere...
view full answer... - Does Spare Tire of 2008 Cadillac SRX Need to Be Removed During Hitch InstallationIn the installation process of the Curt Class III # C13050 hitch, the spare tire is temporarily removed because the heat shield and exhaust brackets need to be modified as shown in the installation instructions and the install video I've linked for you. When the installation is complete, the spare tire is returned to its original position. If you'll be using the hitch for towing purposes, you'll also need the following: Trailer wiring harness, part # C59236 Ball mount, part # C45030 1-7/8...
view full answer... - How Much Does the Curt 13050 Hitch WeighThe Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13050 weighs 50-lbs.
view full answer... - Can Replacement Hardware 2008 Cadillac SRX Hitch be OrderedWe do sell replacement hardware kits for the trailer hitches we offer like the Curt # C13050 which is a fit for your 2008 Cadillac SRX Sport model. For that you would want the part # RHK. On the product page you would need to enter the part number C13050 and select Curt as the hitch manufacturer. I would strongly recommend you use the hitch part number that you have and not just the Curt number if you have something different. The size bolts that come with it are M12-1.75 x 40mm.
view full answer... - Bike Carrying Options for 2008 Cadillac SRXWe have many different options to carry bikes with your 2008 Cadillac SRX. If you click on the links provided, you can see the trunk mounted racks we have determined to be a fit for your vehicle, as well as the most popular hitch mounted racks as determined by our customers. Of the various trunk mounted options, the Thule OutWay # TH45JV for a 2-bike model or # TH56BV for a 3-bike model are the most popular choices. The OutWay uses only 2 rubber coated straps to attach to the vehicle,...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Dustin K
Video Edited:
Sue W
Video by:
Andrew K
Video by:
Patrick B
Video by:
Chad S
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dwaine
11/16/2023
Its been great. No problems what so ever.