Curt Trailer Hitch Receiver - Multi Fit - Class II - 1-1/4"
(4 reviews)
Price: $210.29
In Stock
Curt Trailer Hitch Receiver - Multi Fit - Class II - 1-1/4"
Item # C12923
Retail:$328.95
Our Price: $210.29
You Save: $118.66
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (4)
- Q & A (0)
- Photos
CURT Trailer Hitch - C12923
- Class II
- 1-1/4 Inch Hitch
- 3500 lbs GTW
- Concealed Cross Tube
- 350 lbs TW
- CURT
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Semi-custom hitch is designed to fit several makes and models. Gloss powder coated steel construction.
Features:
- Trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Semi-custom hitch is designed specifically for installation on several different makes and models
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class II
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 350 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
12923 Curt Class 2 Trailer Hitch Receiver
Installation Details
Customer Satisfaction Score:
67% were satisfied with this product
33% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Did not arrive in time
Customer Reviews
Curt Trailer Hitch Receiver - Multi Fit - Class II - 1-1/4" - C12923
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Semi-custom hitch is designed to fit several makes and models. Gloss powder coated steel construction.by: Elder09/21/2023
Service was excellent.
by: Arthur 04/18/2023
Looks well made and arrived in perfect condition!
by: John 02/17/2021
by: Glenn 05/09/2021
4
4
See what our Experts say about this CURT Trailer Hitch
- Correct Trailer Hitch for a 2006 Toyota Matrix XRThe trailer hitch options for a 2006 Toyota Matrix XR are the Draw-Tite Sport Frame Receiver Hitch part # 24812 and the Curt Trailer Hitch Receiver part # C12013 which both have a 1-1/4" receiver tube opening. I recommend the Curt Trailer Hitch because of the higher class rating which will allow for more hitch mounted accessories to be used. The Curt Trailer Hitch Receiver part # C12923 is not a good option. The Curt Trailer Hitch Receiver part # C12013 however is and will not require...
view full answer...
- Curt Hitch that Fits 2018 Mini Clubman S All4We have a Curt hitch that fits your 2018 Mini Clubman S All4 with the part # C11524 as Curt has told us that it fits all models of the 18' Clubman. The # C12923 does not fit your Clubman.
view full answer... - Trailer Hitch Recommendation to Fit Travel Trailer for Carrying a Bike RackThe width of a travel trailer frame is going to be wider than what the hitch you referenced would fit most likely. Instead Curt has hitches designed exactly for your application like the part # 13703 which fit frame widths between 22 and 72 inches apart on center. This also gives you a 2 inch opening instead which more bike racks are designed to fit.
view full answer... - Do Trailer Hitches for 2016 Chevy Colorado All Replace Rear Bumper Support All of the hitches available for your 2016 Chevy Colorado are Class III like the # C12923 and do replace the rear bumper supports. The hitch will safely act as the bumper support though so it would not compromise your safety in any way.
view full answer... - Trailer Hitch that Can Fit 2020 Grand Design 23BHEMost likely not but we do have a better option with the part # 13703. This hitch was designed for fitting RV frames like yours and would work well as long as the frame of your Grand Design is between 22 and 72 inches in width. I attached an install video for this hitch for you to check out as well.
view full answer... - Mounting Hole Spacing on Curt Trailer Hitch Receiver # C12923 The mounting holes on the Curt Trailer Hitch Receiver # C12923 are spaced apart exactly 4.4 inches front to back, on center. Horizontally left to right the mounting holes can be spaced apart as short as 31-1/2 inches to as long as 41-1/2 inches depending on how you adjust the crosstube. This Class II hitch features a towing weight capacity of 3,500 pounds and a tongue weight limit of 350 pounds. I have attached the written installation instructions that you can check out as well.
view full answer...
- What Does Curt Trailer Hitch # C12923 WeighThe Curt hitch part # C12923 weighs 33 lbs total and has a capacity of 3,500 lbs trailer weight and 350 lb tongue weight.
view full answer... - Custom Fit Class 2 Hitch for a 2008 Mazda B2300 I have a custom hitch for your Mazda B2300 truck but the Curt Trailer Hitch Receiver item # C12923 will not fit. The bolt hole spacing is off. Instead, you will want the Curt Trailer Hitch Receiver item # C12012. This hitch also has a 1-1/4" class II receiver. The Curt Hitch item # C12012 is custom fit and attaches to your Mazda with included hardware. It will not require drilling. This hitch has a 350 lbs tongue weight and a 3,500 lbs towing capacity. If you plan on doing any towing...
view full answer... - Trailer Hitch for 28 Foot Long Kola TrailerIt sounds like you are wanting to install a trailer hitch on the rear of your trailer and if that is the case I do have an option for you but the Curt Trailer Hitch Receiver part # C12923 will not work because the mounting flanges most likely won't line up with your trailer frame. Therefore, you will want to use an adjustable trailer hitch, the Adjustable Width Trailer Hitch Receiver part # 13703 which can accommodate trailer frames up to 72" wide. The side brackets included with this hitch...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.