Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Easily and conveniently store your standard, 13.5-cm-long flashlight. Just slip the flashlight into the padded cutouts for stable, secure storage. Aluminum construction is strong and durable.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Tow Racks aluminum flashlight holder, part number TWSP135FLHOA. Now, our flashlight holder does come pre-drilled with 2 mounting holes, which you will need to drill into whichever mounting service you're choosing. We're choosing the interior wall of our enclosed trailer, but you can easily mount this particular flashlight holder to the interior wall of your garage, side of your toolbox, side of your workbench. Pretty well, the mounting locations are limitless. Now, you will need to supply the hardware in order to secure the flashlight to your mounting choice. Now, with our screws in, go ahead and show you what the flashlight looks like. Now, this holder does fit a standard 2 D-Cell flashlight.
In this case were using a metal style 2 D-Cell flashlight. It simply drops into place. Now, you'll notice it has the rubber rings built into it on both sides. This helps keep flashlight from rattling around and making noise. It also allows you to easily remove the flashlight when you need to use it. The flashlight hanger is made of aluminum.
It does give it a nice appearance. It does have a 5 and 3/16ths tall dimension by 3 inches wide and 3 inches deep. With that, that will do it for our quick look of the Tow Racks aluminum flashlight holder, part number TWSP135FLHOA. .
Average Customer Rating: 4.5 out of 5 stars (33 Customer Reviews)
Easily and conveniently store your standard, 13.5-cm-long flashlight. Just slip the flashlight into the padded cutouts for stable, secure storage. Aluminum construction is strong and durable.This is the PERFECT design for flashlight mounting in my work van. The order site was clean and efficient and the product arrived quickly! I couldn't be more pleased with etrailer's service and product quality!
The stainless steel flash light holder is well built; 1/8" thick steel, two mounting holes, 3/8" rubber grommet thickness, can take up to 1-5/8" flashlight body diameter. From the picture, the flashlight holder appears flimsy, but in reality, it's tougher than it looks. The item shipped in well insulated felt material and thick enough cardboard box. Any problem you asked? Yep, edges are razor sharp alike other reviewers noted. Will need debur or file all edges so you don't cut yourself during install or reaching for flashlight in the dark.
I use this to hold my flashlight in my RV by the door. The flashlight is always at hand when I need it while it is dark. The rubber bushings cushion the flashlight to insure you have a rattle free ride while on the move. Very well made holder.
Chuck
6/4/2019
It is still working just fine one year later.
Chuck
6/4/2019
It is still working just fine one year later.
Holds 2D Cell Mag-Lite and 3D Cell Mag-Lite flashlights perfectly! Installed two for home use. I had struggled with Mag-Lite's own plastic clip version (those were cheap and broke easily), so I had been searching for an alternative. These Tow-Rax holders are rugged and will hold up well. The rubber grommets ensure no scratches on the Mag-Lite. etrailer quickly shipped these out!
Everything arrived as ordered. What was nice, setting etrailer.com apart was the wonderful packing of their products. The ordered products arrived well anchored in a large, easy to handle box that actually had handles cut into the cardboard box for easy handling. They had built supports in the box to keep the various products safe and delivered as new. I would definitely order from them again.
Great 3 battery Maglite holder. Easy to remove flashlight and return to holder because there are no clips. I have it mounted next to my RV door so it's easy access when I need a flashlight at camp. Also, nice looking.
Love these flashlight holders. Have put them in all of my RVS or trailers right inside the door so I always know where a flashlight is!! Of course TowRax makes great products, so I don't have to elaborate on quality!!! These really are a must have.
The holder fit my flashlight perfect looks great, maybe could have come with some stainless steel screws even though they might’ve never been the right size but great item
Used to replace the inoperative rechargeable light in my 5th wheel Montana. Also installed the second one in the bedroom area of the RV. Nice product.
While this product is perfect for holding a flashlight and keeping my fishing net upright, the finished quality was atrocious. The edges were very rough and unfinished. They had file marks that looked like a saw blade and they could snag anything that got near them and possibly cut you without any trouble. I spent 20 minutes with a file and steel wool and then finished with an abrasive pad. It now is butter smooth. Don't expect this item to be delivered ready to install. You'll need to do some work on it first. However, it is a solid design!
I have used these flashlight holders for many years. I just purchased more to put in our travel tailer. Thanks ETRAILER!
I have dealt with etrailer.com before and have always been happy with the order process, technical advice, the service info and the quality of the products. Thx again.
This holder is great. We had one in our old travel trailer and are putting this in our new one. Looks nice and is lightweight.
Love these, have 1 in all ofy rv's and enclosed trailer
A must have for keeping flashlight hand y.
It only has to hold a flash light and it does that very well.
Good quality for this part.... Flash light holder is nice.. Im going to buy some for xmas gifts!!
Thought I could fit my mag lite in to it but didn't fit not to happy with this product
Crunchman
3/27/2013
This works fine for my Mag-lite - 2 - D cell
Product is well made, as advertised and arrived very quickly.
Mounted this in my RV, it holds a maglite (d cell size) perfectly
Got the product quickly and was exactly what was ordered. Good follow up and notification on product shipment.
Good construction. Good purchase!
Mounted this in my 1986 F150 cab. Excellent quality product
Love these! This is my second time ordering, kinda pricey but well made and worth it!
POS
Do you have a question about this Trailer Cargo Organizer?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Michael S
8/15/2022
Still awesome! I use it everyday day! The quality is of the highest grade and shows no sign of wear!! Stop shopping and buy it!