Roadmaster Standard Magnetic Tow Lights

See what our Experts say about this Roadmaster Flat Tow Wiring Harness

• Flat Towing Set Up for 2013 Fiat 500
  I would be happy to help you set up your 2013 Fiat 500 for flat towing. You can only flat-tow your Fiat if it has a manual transmission. If you have an automatic transmission you will need the Demco Kar Kaddy X Tow Dolly w/ Disc Brakes - Tilt Bed Frame - 4,800 lbs - Wide Tread item # DM9713093. You are going to need a tow bar, base plate kit, wiring harness for lights, supplemental braking system, a battery charge line, stop light switch, and potentially a high low adapter. If you don't...
  view full answer...
  
• Parts Needed to Flat Tow a 2021 Lincoln Corsair PHEV
  In regards to a 2021 Lincoln Corsair, only the PHEV models with 2.5L engine can be flat-towed. In order to do so you'll need a base plate kit, tow bar, safety cables, tow bar wiring harness, and supplemental braking system. I have attached a list of these parts for you below. Roadmaster Direct-Connect Base Plate Kit part # RM95RR Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar part # RM-676 Roadmaster Standard Magnetic Tow Lights part # RM-2120 Blue Ox Patriot Radio Frequency, Portable...
  view full answer...
• Which Base Plates For Towing Will Fit A 2010 Jeep Wrangler Unlimited
  Both the Roadmaster EZ4 Base Plate Kit # RM-521448-4 and the Roadmaster EZ5 Base Plate Kit # RM-521448-5 will fit your 2010 Jeep Wrangler Unlimited if it does not have an aftermarket bumper, winch, or guards. I recommend the Roadmaster EZ4 Base Plate Kit # RM-521448-4. The Roadmaster EZ series base plates are our most popular base plates. They will fit all the Roadmaster tow bars and they have the hidden bracket design. The EZ5 series base plates will not work with tow bars that require...
  view full answer...
• Will Pilot Magnetic Tow Lights # RM-2120 Have Connection if Lights Are Mounted in Vehicle Interior
  You could certainly place these lights inside of the vehicle and run the wire out through a window as long as you could find a way to mount them. They are magnetic.
  view full answer...
• Recommended Baseplate For A 2008 Mini 2-Door Hardtop
  Hey John, If you have a 2008 Mini Cooper hardtop S-model or 2008 Mini Clubman hardtop then you'll need the Roadmaster # 521877-1. This will work with Aerodynamic Package, but not with Sport suspension. If you have a 2008 Mini Cooper hardtop base model then you'll need the Roadmaster # 521878-1. This does not fit models with Aerodynamic Package or Sport suspension. If you haven't picked out the rest of your flat towing setup then I have the following recommendations for you: Tow Bar:...
  view full answer...
• What Parts And Accessories Do I Need To Flat-Tow 1990 Mazda Miata MX-5 Behind 2001 Winnebago Brave
  To flat-tow your 1990 Mazda Miata MX-5 behind your 2001 Winnebago Brave, you will need base plates, tow bar, safety cables, vehicle wiring or lights, and a supplemental braking system. For a base plate kit, you will need Roadmaster XL Base Plate Kit, part # 711-4. The XL Base Plate Kit features removable draw bars, so when you are not towing your Miata, the base plate brackets are less visible. For a tow bar, I would recommend the Roadmaster Falcon 2 Tow Bar, part # RM-520. The Falcon...
  view full answer...
• Tow Bar Wiring For 2021 GMC Sierra
  They do not; for tow bar wiring on your 2021 GMC Sierra 1500 you will need a splice in kit, the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. If you do not want to splice your only other option are magnetic tow lights, the Roadmaster Standard Magnetic Tow Lights # RM-2120.
  view full answer...
• What Parts are Needed to Tow Jeep with the RoadMaster StowMaster Car-Mounted Tow Bar w/ Lunette Ring
  Other than the Tow Bar, you would need the wiring so that the lights on your Wrangler would work in tandem with the lights on the tow vehicle, and the vehicle-specific base plates that would attach to the Wrangler. The base plates provide an attachment point for the quick disconnect bracket on the Tow Bar. For the wiring, there are three different methods that can be used. The simplest way to go would be to use the magnetic mount light kit, part # RM-2120. This kit has the benefit of...
  view full answer...
• Can Magnetic Light Kit # RM-2120 Wiring Be Attached Directly to the 7-Way Connector of a Tow Dolly
  You could potentially install the magnetic light kit # RM-2120 in the manner you have described. However, you would need to make sure the magnetic lights wiring is connected on the tow dolly side connector for easy installation and removal. Adding more wires to the 7-Way can increase the chances of a short circuit and there may not even be room depending on the gauge of wire used on the tow dolly. If there is no room or it looks like the wires for adjacent circuits could touch, I recommend...
  view full answer...
• Recommended Flat Towing Setup for a 1999 Jeep Cherokee
  Hey Erik, so what you've got left apart from the Roadmaster Falcon # RM-522 that you already have is a base plate, a braking system, and a wiring kit. For a base plate kit, I recommend going with the Blue Ox Base Plate Kit # BX1110 using the Blue Ox Base Plate Adapter Brackets for Roadmaster Tow Bars # BX88151. This base plate kit is custom fit to your vehicle so it'll be a pretty straight forward install, and when paired with the adapter brackets you'll be able to also use your Flacon...
  view full answer...
• Parts Needed to Flat Tow a 2012 Mini Clubman Behind a Motor Home
  On a 2012 Mini Clubman you will have to trim the front fascia to install base plates on the vehicle. There is no modification you can do to get around it. If trimming is something you just do not want to do, or cannot do (if the vehicle is leased for example) then the best thing to do would be to use a small car trailer to carry the vehicle. If trimming is acceptable then starting with the base plates, # 521880-1, you will then need a tow bar. A great compatible tow bar is the Sterling,...
  view full answer...
• Compatibility of Parts From Flat-Towing other Vehicle on My 2012 Ford Edge
  Besides the base plate kit and the maybe the wiring kit used, you should not have any issues using the components used to flat-tow your GMC Yukon XL to flat-tow your 2012 Ford Edge. The item you selected, Roadmaster XL Base Plate Kit # 4408-1, would be the correct kit for your 2012 Ford Edge. The # 4408-1 kit features removable draw-bars to make the base plate kit less visible when the vehicle is not being towed. In addition to a base plate kit and your Blackhawk tow bar, you should...
  view full answer...
• Base Plates, Wiring, and Safety Cables to Flat Tow a 2001 Subaru Forester
  For your 2001 Subaru Forester, you will need to use base plate # 909-9 since your Forester does not have a brush guard. This base plate is the XL style. This means that you can use your Falcon Tow Bar, like # RM-520 or # RM-522. You may also be interested in the Roadmaster Quick Disconnect Tow Bar Base Assembly, # 910021-00, for your Falcon tow bar. This assembly will allow you to connect the tow bar to the above base plates. In addition to base plates and a tow bar, there are a few other...
  view full answer...
• Parts Needed to Flat Tow a 1994 Ford Escort Behind a Motor Home
  To flat tow a vehicle you will need at least 5 items: base plates, tow bar, safety cables, lighting, and supplemental braking. For base plates I recommend # 427-3 because they fit both GT and non-GT models of the 1994 Ford Escort. For a compatible tow bar you can use the Falcon 2 # RM-520. Or for a more economical option you can use the Tracker # RM-020. If you go with the Tracker tow bar you will also need quick disconnects # RM-201 to make it easily removable. For either tow bar you...
  view full answer...
• Base Plates, Safety Cables, Wiring, and Braking System to Flat Tow a 1999 Honda Accord
  We do carry base plates for your 1999 Honda Accord. Take a look at the XL Base Plates, # 1545-1. These are the correct base plates for your vehicle. I also recommend safety cables and a light kit as required by law. For safety cables, I recommend the Single Hook, Coiled Safety Cables, # RM-643. For a temporary lighting solution, use the Magnetic Towing Light Kit, # RM-2120. These lights have a magnet that will stick to a flat metal surface and plug into a 4-flat on the tow vehicle. For...
  view full answer...
• Wiring, Base Plates, Tow Bar and Accessories Needed to Flat Tow a 1997 Ford Ranger
  To flat tow your 1997 Ford Ranger behind a motor home, you will need a special wiring set up. A regular wiring harness will not work. There are a couple of options for you. First, if you will not be towing the truck very often, I recommend using a magnetic light kit like # RM-2120. If you will be towing the truck frequently, I recommend a diode kit, # RM-154. I have included a link to a video that shows a typical installation of this kit for you. Installation of a magnetic kit is simple...
  view full answer...
• Base Plates, Wiring, Braking to Flat Tow a 2003 Honda CR-V Behind a Motor Home with Falcon Tow Bar
  Base plates are vehicle specific so you will need to get some for your 2003 Honda CR-V. But first, go ahead and check the owners manual for any additional important information on flat towing it. For base plates, you can use # 1541-1 if your CR-V does NOT have a brushguard. If it does have a brushguard use # 1541-3. Since you have used the Falcon Tow Bar before, you may not need to add safety cables if you already have some. If you do need safety cables use # RM-643. You will also need...
  view full answer...
• Recommended Flat Towing System for 2016 Ford Fusion Hybrid
  The 2016 Ford Fusion Hybrid only comes with the CVT transmission and it is flat towable with a recommended speed maximum of 70 mph. It is also recommended to start the car and let it run about 5 minutes before traveling and about every 6 hours of traveling to allow the fluids to properly lubricate the transmission. You will want to follow the procedures outlined in your owners manual each time. For this application, I recommend starting with the Roadmaster EZ4 Base Plate Kit - Removable...
  view full answer...
• Recommended Components Needed When Flat-Towing 2007 Chevrolet Trailblazer 4WD
  There are 5 things you will need when you plan on flat-towing any vehicle. You need the base plates, a tow bar, safety cables, lighting on the towed vehicle, and most states now require a supplemental brake system. I have attached links to some helpful articles about flat-towing you may want to check out. In my research I found that your 2007 Chevrolet Trailblazer weighs approximately 5,500 lbs. You will want to check your owner's manual in the Recreational Vehicle Towing section. It will...
  view full answer...
• Parts Needed to Flat Tow a 2014 Ford Focus Behind Different RVs
  Most state laws require supplemental braking on a vehicle that is being flat towed and they do check. The fines are steep so you are better off getting one not to mention it really is the safest approach. We can save you money in other areas of a flat towing set up to offset the cost of a braking system. First you will need base plates for the 2014 Ford Focus. Blue Ox base plates # BX2633 fit non-ST models that do not have adaptive cruise control. For ST models use # BX2640. For a compatible...
  view full answer...
• What Blue Ox Tow Bar do you Recommend for my 2015 Jeep Grand Cherokee
  Both the Blue Ox Avail Tow Bar part # BX7420 with a 10,000 lb capacity and the Blue Ox Ascent Tow Bar part # BX4370 with a 7,500 lb. capacity will both be really good at handling your 5,200 lb. 2015 Jeep Grand Cherokee. Of the two you get more bang for your buck with the Avail in my opinion. More cost effective and a little tougher so longer lasting. Of course there are several items needed to flat tow any vehicle. For a compatible base plate the Blue Ox Base Plate Kit part # BX1128 is...
  view full answer...
• Connecting Magnetic Tow Bar Lights With 4-Way to Motorhome With 7-Way
  We have some options for you to connect magnetic tow bar lights to a motorhome connector (which should be a standard RV 7-way), though there isn't an adapter to go from the 4-round on the Heavy Duty Magnetic Tow Light Set # 337TL257M. While you could do some cutting and splicing to get it to work, the much easier option is to go with a magnetic light set with a 4-flat, the Roadmaster Standard Magnetic Tow Lights # RM-2120. There is an adapter that will go from a 4-flat to a 7-way, so...
  view full answer...
• Correct Base Plate Kit for Towing a 1995 Toyota Tacoma with a Roadmaster Falcon 2 Tow Bar RM-525
  The # 1133-1 Roadmaster base plate kit you referenced is a fit for the 4WD models of the 1995 Toyota Tacoma but you would need an adapter to use it with a Roadmaster Falcon 2 5250 tow bar, our part # RM-525. To make things easier, get the Blue Ox base plate kit # BX3728, as this will connect directly to the tow bar without need for an adapter, and it is also a custom-fit for your vehicle. For a simple wiring solution, you could use a magnetic light kit such as part # RM-2120. The Roadmaster...
  view full answer...
• Parts Needed to Flat Tow a 1997 Ford F-250HD 4X4 7.3 Liter Behind an RV
  There are many configurations of the 1997 Ford F-250HD 4x4 7.3 so it will depend on how much your truck weighs. The Excali-Bar tow bar, # DM9511008, is rated for 7,500 pounds so if the truck is under that you can use it. It is likely that it is less than 7,500 pounds but it is worth mentioning! For base plates you would need to use # 458-1 if your truck does not have a front anti-sway bar. If you use the # 458-1 base plates then you would also need adapter # BX88185 to use the Avail tow...
  view full answer...

Do you have a question about this Flat Tow Wiring Harnes?