Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness

See what our Experts say about this Peterson Flat Tow Wiring Harness

• Will the Peterson Magnetic Tow Lights Part # PE26UR Scratch My Paint
  The Peterson Magnetic Tow Lights part # 73864 are designed so as not to damage your car. It is important that you attach them to a clean surface.
  view full answer...
• Wiring Tail Lights on a 2005 Jeep Wrangler to Tow behind a 2008 Nissan Xterra
  We have exactly what you are looking for. The Tail Light Isolating Diode System with Wiring Harness, part # 38955, is used when you want the towed vehicle lighting system to work with the tow vehicle. There is also a video on how to install the kit that I have linked below.
  view full answer...
• Will Stay-IN-Play DUO Braking System Work With 2008 Saturn Aura XR
  Yes, the SMI Stay-IN-Play DUO Supplemental Braking System # SM99251 will work with your 2008 Saturn Aura. Along with a supplemental braking system there are a number of other parts required to flat tow your vehicle, and I'll list the recommended products for you. - Base Plate Kit: Roadmaster EZ Base Plate Kit # 523145-1 - Tow Bar: Roadmaster Falcon All Terrain Tow Bar # RM-522 - Safety Chains: RoadMaster 68" Single Hook, Coiled Safety Cables # RM-643 - Wiring Kit: Magnetic Tow Lights...
  view full answer...
• What Wiring Components do You Recommend for Towing with My 2017 Porsche Mecan?
  If you are just looking to mount accessories like a bike rack or cargo carrier on a hitch receiver installed on your 2017 Porsche Mecan, you do not need any additional wiring unless you are planning to install a tail light kit like the Peterson Magnetic Tow Lights- 4-Way Flat Connector # PE26UR. If you are planning to use this type of tail light kit or are planning to tow a light utility trailer, you will need the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector...
  view full answer...
• Need Base Plates and Magnetic Tow Light Kit for 2007 Mini Cooper Convertible
  I reviewed an online copy of the owners manual for the 2007 Mini Cooper. Page 114 indicates that the manual transmission model may be flat towed (with the gear shift in neutral) but that the automatic transmission version cannot be flat-towed without causing transmission damage. The automatic must be towed with the front wheels up off the ground as with a tow dolly like RoadMaster # RM-2050-1. If your 2007 Mini Cooper convertible is a manual we offer Roadmaster Base Plates # 521876-1....
  view full answer...
• Are Additional Lights Required on Towed Vehicle When Using a Tow Dolly
  Generally, you don't need additional lighting when using a tow dolly that already has lights. However, it's not a bad idea to check with the local laws in the states you'll be traveling in and in Canada. Some people like to add additional lights just to make it easier to see the vehicle that's on the dolly. If you wish to add lights, you'll need to splice in a tow light kit, like # PE26UR, because the trailer connector on the back of your RV will already be in use with the dolly. Unless...
  view full answer...
• Recommended Flat Tow Equipment for a 2002 Saturn SC2
  You will need to get a completely new tow bar if you're wanting to install a custom base plate kit on your 2002 Saturn SC2. The Curt Tow Bar # C19745 that you have is designed to be connected to your vehicle using the universal brackets that come with the tow bar and the tow bar isn't compatible with anything else. I recommend going with the Roadmaster EZ Base Plate Kit # 52181-1 and pairing it with the Roadmaster StowMaster Tow Bar # RM-501 which connects to the motorhome using a coupler...
  view full answer...
• Recommended Lights For Signaling With Bikes Blocking Tail Lights On A 2014 Kia Sorento
  Since you're trying to display your braking and turn signals utilizing your 4-pole connector your best bet is to use a simple magnetic tow light like the Peterson Magnetic Tow Lights # PE26UR. Since your 2014 Kia Sorento is a crossover SUV the magnetic lights will be high enough above the bikes to display. These are a very simple install; the lights have magnets to stick to your vehicle's roof and come with a 4-pole connector cable to make installation take less than a minute. We also carry...
  view full answer...
• Parts Needed to Flat Tow 2016 Cadillac Escalade
  Along with the Blue Ox Base Plate Kit # BX1716 and the Blue Ox Alpha 2 Tow Bar # BX7380 there are a couple more parts you need in order to safely flat tow your 2016 Cadillac Escalade. Since the Alpha comes with safety chains we can check that off the list but you will also need a wiring kit in order to activate your Escalade's brake lights and turn signals. For that the best option is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267, or you can simply add magnetic...
  view full answer...
• What Pound Rating are the Magnets of the Peterson Magnetic Tow Lights
  The Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR have a 35-40 lb pull force rating. The kit weighs less than 3 lbs so the magnets are very strong in comparison to the weight.
  view full answer...
• Items Needed When Flat Towing Honda Fit
  You will want to check the owner's manual or with a dealership when you consider flat-towing the Honda Fit. Some manufacturers have restrictions as you mentioned for automatic transmissions versus manual transmissions. From my research I found that many people are flat-towing their Fits but the owner's manual from Honda does state the vehicle is not towable. When flat-towing any vehicle there are 5 items you will need. You will need base plates for the vehicle, a tow bar, safety cables,...
  view full answer...
• Recommended Parts Needed To Flat-Tow 2016 Ford Focus Titanium Hatchback
  There are a few things you need when you are flat-towing a vehicle. It sounds like you have checked yoru owner's manual and have some valuable information. You will need base plates, a tow bar, safety cables, lighting, and a supplemental brake system. And to make sure you tow your Focus level you may need a high-low adapter for the trailer hitch. I will make some recommendations for each item and the battery disconnect. The base plates I recommend for your Focus is the Demco Base Plate...
  view full answer...
• How Do the Peterson Magnetic Tow Lights Ground
  The Magnetic Tow Lights part # PE26UR ground through the trailer connector and to the vehicle, not through the magnetic base of the light.
  view full answer...
• Availability of Plug-In Tow Bar Wiring for a 2016 Ram 1500
  Unfortunately, TowDaddy hasn't released the 2016 fits yet, but we do have a magnetic tow light options that will bypass the vehicle wiring, like # C6304 or # PE26UR.
  view full answer...
• Can a 2012 Honda CR-V with Automatic Transmission be Flat-Towed Behind a Motor Home
  Both the front-wheel-drive and all-wheel-drive versions of the 2012 Honda CR-V with automatic transmission can be flat-towed behind a motor home. Honda cautions that before flat towing your CR-V transmission fluid level and condition be checked. If you will flat tow often or for long periods (8 hours or more at a time), then it is suggested to change your transmission fluid at shorter intervals than specified in the manual. It is also necessary to follow a pre-drive conditioning process...
  view full answer...
• Is Roadmaster Diode Wiring Kit # RM-154 Needed When Flat Towing a 2013 Ford Fiesta
  The battery needs to be disconnected when flat towing a 2013 Ford Fiesta with the automatic transmission because the transmission is shifted electrically. If the battery is left connected it could shift the transmission into the wrong gears when being flat towed and damage the transmission. The manual transmission of the Fiesta does not require disconnecting the battery. The diode kit like the Roadmaster Diode Wiring Kit, part # RM-154, is used to connect your lighting on your RV to the...
  view full answer...
• Flat Tow Lighting Recommendation that Uses LED Style Bulbs
  The Peterson Tow Light Kit # PE26UR has LEDs and installs magnetically to a metal portion of your towed vehicle.
  view full answer...
• Will SMI Delta Force Portable Braking System Work on 2019 Honda Fit
  Yes, the Blue Ox Patriot item # BLU37TR will work perfectly on your 2019 Honda Fit. You will also need the # RM-88400. Whether or not a system like this will actually activate the brake lights when pressing down on the pedal depends on the specific vehicle it's being used on (how the tail lights function when in the correct mode for towing). Based on my research though the brake lights for your 2019 Honda Fit should indeed still illuminate when the Patriot 3 applies the brakes. This...
  view full answer...
• Recommended Flat Tow Wiring For 2015 Ford F-150 Crew Cab
  There is not a plug and play option with quick connects for your 2015 Ford F-150. The only kit available for your truck that won't require splicing is the Peterson Magnetic Tow Lights - 4-Way Flat Connector - 20' Long Harness Item # PE26UR with the external lights. If you want to use your factory tail lights, I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This kit will use the diodes to protect your factory system while hardwiring your truck to make...
  view full answer...
• Light Kit Recommendation for a 4 Bike Platform Rack
  I have a solution that would be your easiest option but we don't carry bike rack lighting kits as in most cases bike racks do not block the taillights of a vehicle since they are usually set out wider than the bikes on the rack. The Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR would be an option that would be pretty easy to make work.
  view full answer...
• Wire Color Identification of Tow Bar 4-Way Wiring for Splicing in Additional Lighting
  The green wire of the 4-way connector you sent in a picture of is the right turn/stop circuit, the yellow is left turn/stop, brown is running light, and white is ground. You could use the # 18252 to easily splice into the circuits as well to make an additional connector.
  view full answer...
  
• Recommended Tail Light Wiring For Flat-Towed 2018 Jeep Cherokee With Bike Rack Blocking Taillights
  The 4-pin on the rear of your 2018 Jeep Cherokee Overland wouldn't have power running to it unless it the vehicle was running so the simplest option would be to just bypass the wiring you installed when you plan on flat-towing your vehicle and hauling your bikes and instead using some magnetic lights instead like the Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR or the Custer Lite-It Magnetic Tow Lights # LIW-AGKIT-SG if you would like a wireless connection.
  view full answer...
• Trailer Hitch Wiring And Tail Light Kit For A 2014 Toyota Highlander
  For your 2014 Toyota Highlander, I recommend the -Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # 56042. This harness will simply plug into your OEM factory harness for your 2014 Highlander. Since you also mentioned you wanted to install lights for your bike rack, the -Magnetic Tow Lights # PE26UR will work great since it has a magnetic base it will stick to any metallic surface. Additional, these lights will plug into the 4-flat # 56042 wiring harness mentioned earlier,...
  view full answer...
• Can Kia Soul with Manual Transmission be Flat Towed
  Some model years of the Kia Soul with manual transmission can be safely flat towed with 4 wheels down, but you will want to check your owner's manual to confirm that your particular model year is capable of being flat towed. This should appear in your manual under the heading "recreational towing". This section of your manual will tell you if there are any required preparation steps to ready your Soul for flat towing. Safe and legal flat towing requires a number of components: tow bar,...
  view full answer...

Do you have a question about this Flat Tow Wiring Harnes?