Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
Item # RM-152-98146-7
Our Price: $193.11
Confirmed to Fit
2004 Jeep Wrangler
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (251)
- Q & A (0)
- Photos
2004 Jeep Wrangler - Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.
Features:
- Complete wiring kit lets you connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system
- Wires towed car as a combined lighting system so that brake and turn signals travel along same wire
- Diodes prevent electrical feedback and the damage it can cause to your car's electrical components
- 7-Wire to 6-wire adapter cord allows you to run power from your RV to your towed vehicle
- Straight cord is ideal for all-terrain tow bars and other tow bars that have channel guides
- 6-Way socket wires to harness and mounts on towed car with included bracket
- Sturdy, durable construction
- Powder-coated aluminum casings protect diodes from corrosion
- Electrical cord resists water, oil and chemicals
- Silicone-injected plugs prevent corrosion
- Kit includes:
- 4 Hy-Power diodes
- Wiring harness
- 7-Way to 6-way adapter cord
- 6-Way socket with mounting bracket
- Wire connectors
- Cable ties
- 1 Ring terminal
- 3' Long plastic loom
- Brake light relay (RM-88400 - sold separately) may be required if used with supplemental braking system
- Limited Lifetime Warranty
Specs:
- Maximum amperage: 85 amps
- Maximum voltage: 24 volts
- Adapter cord length: 6-1/2'
- Wire gauge: 16
- Wiring harness length: 30'
Note: For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes will be needed if you want to retain separate turn and brake signals.
Separate vs. Combined Lighting Systems
Some automobiles operate on a 3-wire system, wherein the brake signal and the turn signals travel along different wires to illuminate different lights. (Typically, these vehicles have amber turn signals.) This is referred to as a "separate lighting system". When you hook up for flat towing using this kit, your towed car's lighting system will operate in a combined fashion regardless of whether it typically has combined or separate lighting. This means that the brake and turn signals sent by your RV to your towed car will be carried on a single wire. As a result, your car's brake lights will do the flashing for the turn signals. Your vehicle will still function as designed when not hooked up to your RV.
Do You Need a Brake Light Relay?
Because this kit wires your vehicle as a combined system, a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
RM-152 Roadmaster Universal Hy-Power Diode Wiring Kit
RM-98146-7 Roadmaster Wiring - Straight 6 to 7 - 78" Long
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord - RM-152-98146-7
Average Customer Rating: 4.7 out of 5 stars (251 Customer Reviews)
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.by: Bill11/06/2023
The install on my Ford Maverick is clean and functional, so this is more of a customer service review... excellent customer service!
During the 4-day towing set-up install, the forecast was for freezing temps and my rig was not winterized. I called in mid panic and the motorhome was moved indoors.
A few months after using the tow set-up, a minor problem developed. I called and the CSR apologized and said, I can see how that might be frustrating, and a replacement cable (slightly longer) was sent free of charge.
by: Edward 05/16/2024
I also purchased brackets and receivers for the tow bar. Both were as advertised and are functioning very well. The staff were also very knowledgeable and helpful. Hard to find service of this kind in today’s world.
by: Phil 04/04/2024
The installation ins ructions and video were very helpful. The wiring kit worked perfectly.
by: Jason05/08/2023
Great kit. Easy to install. Connectors seem solid and wires are good.
by: James02/24/2024
The installation took some time and the instructions need to be clarified.
by: Dean 10/18/2023
Roadmaster
The Roadmaster 4 diode wiring kit has worked great for a full towing season.
Easy installation, great instructions, and added safety while towing.
The wiring kit easily integrated into the other braking and towing system components.
Thanks e-trailer!
by: Juan09/15/2021
2013 Subaru Forester
Works as expected. Connection feels solid enough. Have not had the opportunity to take it on a long trip yet.
One thing bit us in the butt, forcing us to cancel a trip at the last minute (when testing that our towed vehicle's turn signals, brake lights and supplemental brake system was working before driving off!): the left-turn signal prong in the male part of the connector (that plugs into the towed vehicle) was not opened enough, so no steady connection was being made because there was no contact between the prong and the walls of the female part. This had worked in a previous test. Picture included. Make sure to use a flathead screwdriver to open each prong up so full contact is made!
by: William 08/03/2023
This kit worked great. It was easy to install (etrailer offers installation videos if needed). I like this much better than a temporary set of lights on the towed vehicle. The cord and plug are also good quality.
by: Daniel05/02/2024
Easy install. Good directions. Works as described.
by: Stephen B07/14/2023
I have not been disappointed with anything I have ordered from you.
This wiring kit should do the trick for my flat towing project.
I am sorry that I couldn’t get all of the pieces from you, the transmission pump and base plate was ordered from another company.
This is my fourth camper you are helping me keep maintained and improved.
2000 Cougar 5th wheel bunkhouse,2016 Sprinter 5th wheel front living room , 2021 Nexus 31t class C and a 2016 sprinter tow behind.
by: Steve05/27/2021
I chose the order by phone option. The website is well organized, but, I had gone too long without hearing another person. I have received several orders from etrailer after purchasing an RV last summer. I knew we would be Purchasing a Toad.
I don’t have any experience with towing another vehicle, so I had plenty of help in finding the right equipment for me.
The delivery times were all easily tracked and arrived in good condition. As md on time.
I had the simple tools required to install the base plate and hitch. The videos available on their site are clear and easy to understand.
I have had a great overall experience with etrailer.
by: Janes01/10/2024
Easy instructions and works great!!!
by: James04/10/2022
2019 GMC Acadia
Very straight forward install, easy to follow instructions. If you do this your self be prepared, the factory light wiring isn't very long or thick it was difficult to strip the wire back far enough to double it over to get a good connection. Upon completion of the wiring, I double checked all power at both plugs, it was all good, I installed the lights, brake and turnsignals worked great, I didn't have any running lights. About 3 min later they came on and stayed on. I don't believe this has any thing to do with the kit, this vehicle has all kinds of light sensors, darkness sensors, rain sensors.. etc. I believe it just too a min or 2 for the lights to actually come on.
by: Joe H08/31/2022
See my review on the Base Plate. The electric was a little wonky but my mechanic met with the manufacturer and was able to figure it out. That said, once it was resolved, it has worked flawlessly.
by: James04/20/2022
Toyota Tacoma
I had a Toyota Tacoma that has separate blinker lights. Took a mechanic that was knowledgeable in electrical wiring. Followed the instructions and it worked perfect. Used it several times since
James J.
4/21/2023
Great. Been on several trips. No problem
by: Wayne05/17/2023
All running and signal lights work great. But no license plate light illumination.
Jenny N.
5/23/2023
You are correct in that the tow bar wiring harness part # RM-152-98146-7 will not illuminate the license plate light as the diodes are meant to keep the signals from backfeeding into your vehicle wiring. We have checked into this and having the license plate light is not mandatory when flat towing.
by: Bruce 10/04/2023
Easy to install. Would prefer a different method for securing the diodes. I used zip ties of good quality from Ty-Rap instead of the box store cheap imitations.
by: Tom F09/10/2023
2020 JeepWrangler
Very straightforward. I followed along to one of the videos on etrailer's site and it went very easy for me thank you etrailer!
by: Richard 02/23/2024
Works great.
by: Beemerjohn12/27/2023
Wiring was about 8 feet short to complete the task.
by: Don 04/13/2023
Honda
Kit worked well. On 2012 Honda CRV I was able to run the wire to the rear under interior panels then install diodes inside each quarter panels eliminating any wiring or component connections exposed to the weather.
by: Boyd10/03/2022
2003 Jeep TJ
1 star is simply for the fact that the straight cord is too short. Bought to use with a road master tow bar. Since I needed a drop hitch to line the tow bat up with the toad I needed about a foot more cable. Tried to make do with the one supplied. I ended up having to spend an hour in the parking lot of an rv store wiring up a new one on my first trip. You would think for [local stores] you have to pay for this they could spring for a little extra wite.
Katrina B.
10/17/2022
That is unfortunate that there was not enough wire for your application. We do carry 16 gauge bonded 4 wire, part # 16-4B-1, by the foot. You can always contact our customer service department for them to assist you in getting this wire ordered.
by: Edwin01/27/2023
It was the installation that was a issue, it works great now that I finally got it installed correctly. Had to go through 3 companies before it worked. It cost me 3 times as much, I went to a recommended installer from your site, and they hook it up but didn’t used the diodes that were provided. I took it back, and asked them to install the diodes.(the company “Fatal LLC”) charged me [XX] I kept getting feedback when the emergency lights were used, they say it’s normal for that to do that. I didn’t believe it, so I-took it to camping world, they rewired it and used a different diode don’t asked me why, but it-still didn’t work they said it would eventually work itself out, It didn’t, so I had still have the problem with the feedback when using the emergency flashers. I guess I’ll live with it. It works I guess….
by: Neal 04/08/2023
2023 JeepWrangler
Have not installed yet (DUO Brake system and wiring) from what I have seen I am impressed with all parts delivered.
tow bar Plate is more than substantial and the Tow bar is amazing.
by: Matt09/03/2022
I ordered base plates and the wire harness, the wire harness would not allow for brake, running, and turn signal lights, I had to omit one, the turn signals. The base plates where difficult, requires removing the front of the car. the video did not state the distance front to rear, I was a half inch to far forward and the fog light would not fit.
Jenny N.
9/20/2022
You mentioned that the harness would not allow for the brake, running and turn signal lights. For vehicles that have separate turn and brake lights, this kit will cause your brake lights to function as both brake and turn signal lights. This is perfectly fine. If you want to have both separate turn and brake signals, then you will need part # 118158 and part # RM-792 to do so.
25
251
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Parts to Flat Tow 2021 Jeep WranglerThe base plate kit can vary depending on the Jeep front bumper type. I am quoting parts based on the factory plastic bumper. If you have a factory steel bumper, Off road bumper with 3/4" D-rings or Off road bumper with 1" D-rings, just let me know so I can adjust the recommendation if necessary. For the base plate kit I would recommend the etrailer # e98948 Invisible Base Plate Kit with removable arms. I have attached a installation video for a 2020 Wrangler Unlimited to give you an idea...
view full answer... - Base Plate Kit for 2015 Kia Soul Manual for Flat TowingI recommend the Roadmaster # RM-522114-5 base plate We do not have an instructional video showing the installation of these baseplates. I have attached the installation instructions. Figures Q and V illustrate the areas requiring trimming. As with any base plate kit there will be some trimming. In this case it is an area around the honeycomb grill section. If you plan on flat towing these are the parts that you may need: 1. Base Plate Kit: Roadmaster # RM-522114-5 2. Two Bar: Roadmaster...
view full answer... - Required Wiring To Flat Tow 2009 Jeep Wrangler Unlimited With Brake Buddy 2 Braking SystemThere is two different sets of wiring used to hook your 2009 Jeep Wrangler Unlimited to your Motorhome. This will be the wiring for your braking system and wiring for your lights and turn signals. The Brake Buddy 2 or the newer Brake Buddy Classic 3 Portable Supplemental Braking System # HM39494 will include all necessary wiring for the install and using, but if you need the replacement wiring you can use Replacement Breakaway System # HM39340, Replacement Dash Mount Connector # HM39342...
view full answer... - How to Tow a 2019 Jeep Cherokee Behind a MotorhomeYou can flat tow the 2019 Jeep Cherokee if it is a 4x4 model with 2-speed power transfer unit. Models with the 1-speed power transfer unit would have to be put on a trailer. None of the 2-wheel drive models can be flat towed but you can dolly tow front wheel drive models from the front. If you do have a model that can be flat towed and it is a Trailhawk or Overland edition you can use base plates # RM-521451-5. For a compatible tow bar I recommend the Falcon All-Terrain # RM-522. This...
view full answer... - Parts Needed to Flat Tow a 2018 GMC Sierra 1500 Behind a MotorhomeWe do have base plates for your 2018 GMC Sierra 1500 but # RM-3180-2 will not fit. The comparable set that will fit your 1500 is # RM-3177-3. This set actually has removable arms so that when you take them out the base plates are essentially invisible. I have linked the installation instructions for you to view. For a compatible tow bar I recommend the Blackhawk 2 # RM-422. This is an all-terrain tow bar which means you will not have to be lined up perfectly straight and level to hook...
view full answer... - Complete Flat Towing System for 2020 Jeep Wrangler UnlimitedThe Blue Ox Avail Tow Bar - Motorhome Mount - 10,000 lbs # BX7420 is just one part of the system you need to flat tow your 2020 Jeep Wrangler Unlimited. You will also need the baseplates, the wiring harness, the supplemental braking system and a high-low adapter. I recommend the following items to go with that tow bar for your Jeep: -Blue Ox Base Plate Kit - Removable Arms # BX1139 -Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7 -Demco...
view full answer... - Can a 2011 Honda Civic Be Flat Towed 4 Wheels Down?According to your owners manual, your vehicle is not able to be flat towed. Doing so is against the manufacturer recommendation and warranty. Many people have towed a 2011 Honda Civic 4 wheels down and obviously there are manufacturers that make all the parts to do so. If you choose to do this, you will need baseplates, tow bar, safety cables, electrical wiring, supplemental braking system, and high low adapter. Here are my recommendations if you go that route: -Blue Ox Base Plate...
view full answer... - All Parts Needed to Flat Tow 2021 Jeep Grand CherokeeWe can get your 2021 Jeep Grand Cherokee set up to flat tow, and I'll make a list for you of all the parts that you'll need, which will include base plates, a tow bar, wiring, and a supplemental braking system. The exact parts for your '21 Grand Cherokee will be the following: - Base Plate Kit: Demco Tabless Base Plate Kit # DM9519291 - Tow Bar: Demco Dominator Non-Binding Tow Bar # DM9511008 - Wiring Kit: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire #...
view full answer... - Adapter to Flat Tow a 2009 Jeep Wrangler with Aftermarket Bumper with D-RingsWe do have adapters so that the D ring bumper on your 2009 Jeep Wrangler will be compatible with a tow bar, but you will need a new tow bar. The adapters that will allow you to flat tow your Wrangler come from Roadmaster. Blue Ox tow bars and Roadmaster base plate kits already require an adapter to be used together. The adapter for your bumper is not compatible with the Roadmaster Base Plate/Blue Ox Tow Bar adapters. The Roadmaster Adapter # RM-035 will attach to 3/4 inch shackle mounts...
view full answer... - Recommended Parts to Flat Tow a 2020 Jeep Cherokee TrailhawkTo tow your 2020 Jeep Cherokee Trailhawk behind a motorhome there are several components you need for a complete, safe set up. The first is a base plate, I recommend Roadmaster direct- connect base plate kit part # RM-521451-5. The base plate bolts to your Cherokee frame and provides the solid attachment point to hook up to. I have installed a variety of base plates on many different vehicles, and Roadmaster's direct-connect is my favorite. I think they install smoother, and have a really...
view full answer... - Diode lighting Kit Needed For Flat Towing A 2020 Jeep Gladiator With LED LightsSince you have LED tail lights the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord Item # RM-152-98146-7 will not work. Instead you'll need the Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red Item # RM-152-LED-7.
view full answer... - Does Base Plate Fit 2021 Nissan Frontier With Automatic TransmissionIt does; the "Manual Transmission" spec on the page is due to the fact that only the manual transmission for your 2021 Nissan Frontier can be flat towed, unless you get a drive shaft disconnect like you are. But the transmission does not affect the fit of the base plates, so they will work on your '21 Frontier. Along with the base plates there are a number of other parts you'll need, which I'll go ahead and list out for you: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit #...
view full answer... - Parts Needed To Flat-Tow a 2020 Jeep Cherokee TrailhawkIn order to flat-tow a 2020 Jeep Cherokee Trailhawk you'll need a base plate kit, tow bar, safety cables, wiring harness, a supplemental braking system, and possibly a few other things. I will list my recommendations for each of these below. etrailer Invisible Base Plate Kit part # e98951 etrailer SD Non-Binding Tow Bar part # e34ZR Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles part # RM-152-98146-7 Blue Ox Patriot Portable Braking System part # BLU37TR The Mopar Flat-Tow...
view full answer... - Parts Needed to Flat Tow a 2020 Lincoln MKZ Hybrid w/ Adaptive Cruise ControlI can definitely help you out with that. In addition to the tow bar, brakes and lights, you will also need a base plate kit and safety cables. I have listed these parts out for you below, along with a brief description of their purpose. Base Plate Kit: This is a custom fit part that provides the attachment point for the tow bar on your MKZ Hybrid. - Blue Ox Base Plate Kit # BX2674 Tow Bar: This is what will come from the motor home and attach to the base plate kit. - Blue Ox Alpha 2...
view full answer... - How To Mount The 6-Pole Round Diode Wiring Plug To A 2022 Chevy Tahoe Z71 I assume you're talking about the plug for your diode wiring # RM-152-98146-7, in which case, since there isn't a mounting bracket available on the Roadmaster Direct-Connect Base Plate Kit # RM64ZR your only option would be to mount to the grill or fascia of your 2022 Chevy Tahoe Z71. Typically if we have baseplates like these we cut a hole in the fascia for the wiring to pass through and mount the plug directly to the fascia using some self-tapping screws. I've seen quite a few people...
view full answer... - Parts Needed to Flat Tow a 2011 Nissan VersaA complete flat towing setup typically consists of base plates, a tow bar compatible with your base plates, safety cables, tow bar wiring, supplemental braking and a high/low adapter; it sounds like you already have a supplemental braking system but we can help you locate the other parts. Typically your base plates will dictate your tow bar, and you have 2 options for base plates in the Roadmaster # 52347-1 and the Blue Ox # BX1845. Both provide you with removable arms so that your vehicle...
view full answer... - Complete Flat Towing Setup For A 2018 Ford Expedition LimitedSure thing! To complete your flat tow setup for your 2018 Ford Expedition, you will also need: 1. A base plate kit, like the Roadmaster Direct-Connect Base Plate Kit # RM-524457-5. You'll need a base plate kit to connect your tow bars to your toad vehicle. 2.The next thing you're going to need is a braking system, like the Roadmaster BrakeMaster System w BrakeAway for RVs w Air or Air Over Hydraulic Brakes # RM-9160, with the RoadMaster BrakeMaster Custom Seat Adapter # RM-88318. A...
view full answer...
- How To Connect A 7-Pole Diode Wiring Cable To A 4-Pole Connector On An RV Since you already have a 4-pole wiring harness on your RV you would just need to install a 4-pole to 7-pole Adapter # 37185 to get a 7-way connection at the end of your motorhome and allow you to hook up your straight cable from your Roadmaster 4-Diode Universal Wiring Kit # RM-152-98146-7. To install this kit you'll need to make the following connections: The 4-pole connector to the one already on your RV. The blue wire to the brake controller. The purple wire to the reverse light...
view full answer... - Flat Towing Package for 2022 Jeep CherokeeYou'll need a tow bar, base plates, safety cables, wiring for the taillights, a supplemental braking system, and possibly a high/low adapter if the installed height of the base plates has a height difference compared to the motorhome hitch greater than three inches. I'll link to an article that shows how to measure for the height difference, along with a listing of our available high/low adapters. For a tow bar, I'd recommend the Roadmaster Falcon All-Terrain tow bar, part # RM-522 along...
view full answer... - Parts Needed To Flat Tow 2009 Buick Enclave FWD Behind A Motor HomeYou will only need a few parts to flat tow your Enclave. First you will need a base plate kit made custom for your towed vehicle. The Roadmaster # 523149-1 would be a good choice. Next you will need a tow bar. I recommend the Roadmaster # RM-522 “Falcon” All Terrain and Non-Binding tow bar rated for 6000 pounds. A non-binding tow bar will let you easily disconnect your tow bar even if your coach and towed vehicle is not on level ground or at a difficult angle. When your coach and towed...
view full answer... - Recommended Flat-Tow Wiring Harness for a 2009 Honda CR-VThe flat-tow wiring harness I recommend for a 2009 Honda CR-V is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 if the tow bar does not have channels for the umbilical and safety cables or the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles part # RM-152-98146-7 if it does. These kits are my personal favorites as they require minimal modifications and are very reliable The Falcon 2 does not have channels whereas the Falcon All-Terrain does have channels....
view full answer... - Is the Curt Rambler Tow Bar Compatible with Blue Ox Baseplates for a 2019 Ram 2500Yes. The Curt Rambler # C26FR is designed to work with all Blue Ox base plates, including the # BLU86CR. This will be a nice setup for your 2019 Ram 2500 and the Rambler is very light weight, so it's easy to install and remove. I also really like that the Rambler comes with safety cables included, so it's one less part you'll need if you don't already have a complete flat towing setup. A complete flat towing setup consists of base plates, safety cables and a compatible tow bar, plus tow...
view full answer... - What do I Need to Tow 2007 Jeep Cherokee 4 Wheel DriveYou only need a few items to your Grand Chrokee. First you will need a base plate kit made specifically for your vehicle. The Roadmaster # 1427-3 Direct-Connect kit is a perfect fit and features quick disconnect arms. Next you will need a tow bar. I recommend the Roadmaster # RM-522 “Falcon” All Terrain and Non-Binding tow bar rated for 6000 pounds. A non-binding tow bar will let you easily disconnect your tow bar even if your coach and towed vehicle is not on level ground or at a difficult...
view full answer... - Does This Tow Bar Come With Brackets and Safety CablesThis tow bar does come with safety cables, which is a nice bonus. If by "Brackets" you mean "Base Plate Kit" that fits your vehicle, then no, those are made specifically to fit your towed vehicle and sold separately. For your 2015 GMC Sierra 3500 you can use the Demco # DM9517321 Base Plate Kit to connect your truck to your etrailer # e97ZR tow bar. To flat tow you will additionally need the Roadmaster # RM-152-98146-7 Universal wiring kit, and the Brake Buddy Supplemental Braking System...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Zack K
Video by:
Kathleen M
Video by:
Shane H
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Rick G
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Video Edited:
John S
Written by:
Shelly K
Updated by:
Hannah L
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
3/3/2023
no issues after 10K miles super happy with this product