Heavy Duty Magnetic Tow Lights - 20' Wiring Harness with 4-Way Flat Trailer Connector
Item # TL21RK
Retail:$80.99
Our Price: $39.94
You Save: 51%
Confirmed to Fit
2016 Ford Edge
SE
SEL
Sport and Titanium
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (144)
- Q & A (0)
- Photos
2016 Ford Edge - Heavy Duty Magnetic Tow Lights - 20' Wiring Harness with 4-Way Flat Trailer Connector
- Removable Tail Light Kit
- Bypasses Vehicle Wiring
- Magnetic Mount
- Universal
- Optronics
Get lights for towing your Ford Edge without splicing into its wiring. Magnetic light kit provides a pair of stop, turn, and tail lights. Mounts using large, heavy-duty magnets for increased stability. Plugs in at rear of your motor home.
Features:
- Light kit allows you to bypass your vehicle's wiring to provide temporary lights for your towed car
- Can also be used as trailer lights
- 2 Red lights act as brake, tail, and turn signal lights
- Magnetic bases let you easily mount lights on trunk or roof of your car
- Large, heavy-duty magnets provide excellent stability
- Wishbone-style wiring harness can be easily routed beneath car
- 4-Pole flat connector on harness is designed to hook up to your RV's 4-way trailer connector
- Separate, 3' long harness with 4-way can be wired into tow vehicle or RV if no trailer connector is present
- Includes quick-splice connectors for simple installation
- Department of Transportation compliant
Specs:
- Wiring harness length: 20'
- Wire length between lights: 4-1/2'
- Separate wire with 4-way for tow vehicle: 3'
- Bulb type: 2057 double filament
- 3-Year limited warranty on housing and wiring only
A towed car is required by law to have functional brake and signal lights that illuminate at the same time as the brake and signal lights on the RV that is towing it. Most wiring kits require you to splice into your vehicle's electrical system to install diodes, but doing this can void your manufacturer's warranty. You also run the risk of making a mistake during installation that could result in potentially damaging electrical feedback. Magnetic tow lights eliminate this problem because they bypass your car's electrical system entirely and leave your wiring intact. Just mount the lights on your vehicle's trunk or roof with the heavy-duty magnetic bases. Then run the wiring harness up to the front of your towed car, across your tow bar, and then connect it to the 4-way flat on your motor home or tow vehicle. If your tow vehicle doesn't have a 4-way, an adapter is required.
This kit includes a 20' long wishbone-style wiring harness with a 4-way flat connector on the end. A separate 3' wiring harness with a 4-way plug can be used to install a 4-way on your tow vehicle or RV if it does not already have a trailer connector. Quick-splice connectors are included if needed. A 4-1/2' long harness connects both lights, giving you enough slack to position the lights where you want them.
TL21RK Optronics Magnetic Mount Stop, Turn, and Tail Towing Light Kit w 20' Wiring Harness
Alternate part number: TL-21RK
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Heavy Duty Magnetic Tow Lights - 20' Wiring Harness with 4-Way Flat Trailer Connector - TL21RK
Average Customer Rating: 4.6 out of 5 stars (144 Customer Reviews)
Get lights for towing your vehicle without splicing into its wiring. Magnetic light kit provides a pair of stop, turn, and tail lights. Mounts using large, heavy-duty magnets for increased stability. Plugs in at rear of your motor home.by: Steven 01/28/2024
Overall it worked fine. Easy to use. We did encounter some high winds that twisted the light sideways once. Magnet strength otherwise is strong enough.
by: Kent 12/18/2023
2003 Jeep Wrangler
A very easy way to light my jeep when towed without having to cut into the jeeps wiring system.
by: Robert 07/24/2023
Thank you for the quick service. I appreciate that they were able to accommodate my need of replacing my wiring harness.
by: Steven 02/03/2024
Haven’t used them yet but they look good and I’m sure they will do the job.
by: Crawford C.04/23/2023
This didn't work out of the box! The passenger side would not function at all. No tail, brake, or turn signal. Etrailer is issuing a return for refund. I had to leave for a camping trip, so I went to Harbor Freight and purchased an LED set for a little over half of what these cost; and these aren't LED.
by: Steelhead07/11/2015
1983 Jeep CJ-7
works great for towing my jeep. just plug the four flat into the factory trailer wiring on the tow vehicle, set the lights on the bumper and they work perfect. the magnets are strong but the thicker the metal they are on the better they hold. steel on my bumper is thick enough for a strong hold but I tried thinner metal and the hold is weaker so you may need to add some straps
by: Ed F06/09/2017
The product arrived quickly and was exactly as advertised. The light kit is the perfect solution for the car I tow behind my RV, but also use by itself. I like the fact that it is totally portable, mounts high up on the vehicle for good visibility and is quick and easy to install when needed.
Ed F.
6/9/2018
Worked perfect. I have since gone to anew vehicle with integrated light wiring. I sold the lights to a friend and he has been happy since!
by: Tim C05/29/2020
Honda
I am very happy with this purchase. The magnets in the base of the lights keep them connected to the roof of our towed car, no wobbling! The signal wire is long enough to run through our 2019 Honda Fit and connect with our tow vehicle. After getting wet several times, the protective sticker on the bottom of the lights wore off and now the lights have left slight scratches on the roof of the car, nothing major. On the roof of our towed car, they are seen from a distance and work with the tail lights of our motor home just fine.
On occasion, we have to wiggle the wire coming out of the light to get it to work, but this is after a year’s worth of intermittent towing and I’m pretty sure we bashed them around a little. Great product at a great price, professional installation is not necessary. A little better construction and this would be a 5 star rating.
by: Nick08/25/2012
2008 Honda CR-V
I am using these for added visibility on the back of a large bike rack that pretty much stays on the car all the time. I do not suggest using the magnets as the only form of attachment as they are not strong enough to keep the lights attached when going over bumps. I zip-tied them to the frame of the bike rack. At first, I had them sticking out from the bottom of the rack, and they were fine until I went up a steep hill and one of the lights got knocked off on the road. These lights are extremely well-built because instead of snapping the light, the rather large zip-ties broke. The light still works great after the incident. I now have them sticking out the sides to give more ground clearance, and they seem to be doing fine. For my application, I had to replace the wire between the lights with a longer one, but that was not difficult and will not be necessary in a typical application. At least the lights are easy to disassemble to access the wiring. The only way these could be improved would be to add strong neodymium magnets and to make the red lenses screw on (instead of snapping on) for easier access to the bulbs for replacement. Otherwise, a perfect product.
For the record, I did not need to use the included vehicle wiring harness or splice connectors, since my application required an electronic light controller.
by: Big Donald01/14/2021
I got this because the lights on the trailer for my 15' Boston Whaler kept getting broken while launching. Now, I just have to hook these on before I hit the road (easily by magnet) and I can take them off before risking damage while launching. Perfect! Just make sure the wire is long enough. It just fits my little trailer, but a longer one may need an extension wire harness.
by: Amy11/27/2017
The magnets didn't stay on the car so I ended up permanently gluing them to my roof since we tow our car behind the rv full time. Had to replace the bulbs with LED bulbs since our rv tail lights couldn't supply enough voltage to the incandescent bulbs to see them in daytime. This isn't a failure of the product but rather an undiagnosed voltage problem with our rv. With those modifications I am happy with it.
by: Doug Q05/28/2013
Perfect, just what we needed to get our trailer home from storage so I could work on the finding the root cause for the failure of the permanent trailer lights. Now that the permanent lights have been fixed, the temporary magnetic lights are stored with the trailer sort of like a spare tire, knowing how fiddly trailer wiring can sometimes be. It's worth the small investment for the extra measure of safety in case the permanent trailer lights fail again far from home.
by: James 07/14/2020
Ford Five Hundred
Excellent service, product as promised, little modifications required to fit my Fiat 500.
Only on problem, takes a long time to wait on the phone for customer service
Jame W.
7/15/2021
Fantastic, wiring needs s little workcomments previously sent
by: Bo01/03/2013
Everything needed for my application. Easily moved from tow dolly mount to fender of vehicle being towed.
Bo
7/4/2014
One-and-a-half years later I am still using the tow lights regularly and they still work and look great!
by: Michelle08/01/2017
etrailer was easy to order from and shipping was fast. However, I ordered this specific light set to fit my standard 4-way flat connection that already exists on my trailer and did not plan on doing any wiring on my truck. Unfortunately, it does not fit. I will have to buy a converter or something I guess. I emailed them with this issue asking if this light is not a standard 4-way flat and haven't received a response.
Seems to be a nice sturdy light set. Doesn't help when I can't use it, though.
by: tfs07/04/2016
Strong magnets hold the lights in place even on a bouncy trailer. Lead wire length is sufficient for the average towing vehicle or trailer. My only complaint is that the wire length between the two lights needs to be a foot longer for my uses.
by: Steve S-omaha09/17/2016
After struggling with my trailer lighting system for years, I gave up and bought a portable system from etrailer. Within 5 minutes of unwrapping it, everything worked great and I am not longer spending hours trying to trouble shoot the old system. The magnets that hold the lights on the trailer are very strong, but I still use a bungy cord on each one just in case I hit a large bump in the road.
Thanks etrailer, excellent product!
by: Michael L.01/06/2012
I purchased a Curt hitch for my 09 CRV. I also bought a wiring harness and a set of magnetic lights for attachment to vehicles. I was able to install the hitch in less than an hour. It took me 30 minutes to connect the wiring. The lights are very simple to connect and only hook up one way. The instructions included links to videos that made the job a snap. The instructions said to put the wiring inside the car by the spare tire when not in use to preserve the connector. what a great suggestion! I did not put a single mark on the car and the hitch looks great.
by: Dennis 03/23/2021
Ford Ranger
Nice magnetic set. I bolted small steel pieces to my ranger bumper because it is covered in plastic. An easy hack located them just wide of the tailgate so it could open with lights in place. Drove 1200 miles with no problems.
by: Richard12/27/2017
Jeep Liberty
They say that a company is only as good as its employees... Well, etrailer is extremely fortunate to have someone like Shawn B. Working for them! This young lady got me out of a really frustrating predicament, and through careful listening and asking the right questions, she saved me not only a ton of money, but a whole bunch of frustration as well! My dilemma was that I had purchased a Jeep Liberty with a Blue Ox base plate, but I had a Blackhawk 2 tow bar! I thought I was going to have to go out and buy a Blue Ox tow bar to use with the Blue Ox base plate, but through careful review of my situation, and a calm analytical approach, this young lady determined exactly what I needed in the way of adapters and a towing light set up! Today, more than ever, it's all about customer service, and that is exactly what she provided for me!
by: Matthew08/10/2021
Used on tow car over the last year - towed at slight angle via tow-dolly. Driven 1000's of miles with this on the tow car through rough storms and strong winds - have not experienced an issue. Strong magnets have not scratched the vehicle. Would purchase again.
by: Jason H08/23/2020
Plenty of cord. My only desire would be the magnets be on the back of the lights, not the bottom. But I made it work. Used this to make my bike rack euro compliant for lighting.
by: Carl J10/24/2018
2013 Jeep Wrangler Unlimited
Strong magnets. I needed an extension to plug the lights into the tow vehicle. The wires could be longer between the lights.
by: Nick07/02/2022
1994 Jeep Wrangler
This lighting kit is just what I needed to pull my Jeep behind my motorhome .
I hooked it up for a test ride and only 1 turn signal worked. When I took the light apart
I found loose wire that was not captured in the wire nut. ( wire nuts are for home construction)
If this item had been built to automotive standards it may have worked without a repair.
I'm not Impressed !
25
144
Show More Reviews
See what our Experts say about this Optronics Tow Bar Wiring
- Parts Needed to Flat Tow 1990 Mazda MiataIn order to flat tow your 1990 Mazda Miata you are going to need base plates, a tow bar, safety cables, wiring to activate brake and turn signal lights, a supplemental braking system and likely a high-low adapter. The base plates that fit your Miata are the RoadMaster XL # 711-4 and the compatible RoadMaster Tracker Tow Bar # RM-020 which you referenced. For safety chains you can use the RoadMaster 68" Single Hook, Coiled Safety Cables # RM-643. There are a couple of options for you...
view full answer... - Wireless Flat Tow Taillight Options for 2007 Honda CR-VYes, when flat towing your 2007 Honda CR-V, you can use either the Custer Wireless LED Tow Bar Light with Magnetic Base, # LIW-LDTL-7B for a 7-way RV style plug. Or, # LIW-LDTL for a 4-pin round plug depending on your needs. This is a weatherproof, rechargeable battery design with LED's that provides stop, tail, side marker, and turn functions. The magnetic base provides secure grip. Please note the linked product video.
view full answer... - Will The 4-Pole Connector On A Towed Vehicle Have Power Running To It No, while towing your Ranger the 4-pole on it will have no power running to it to activate the Curt Auxiliary LED Indicator Lights # C53201. The only way to make it work would be to connect to the motorhome since that's where the traffic signal would be coming from. This is the same concept as magnetic lights like part # TL21RK. The problem is that your 4-pole or 7-way is already in use from the wire harness you're using to activate the lights on the Ranger with the motorhome. The only...
view full answer... - Flat Towing a 2007 Suzuki XL7You will need to refer to you vehicle specific owners manual as to whether your 2007 Suzuki XL7 can be flat towed; trim levels, transmission options and other vehicle specific options all need to be considered to determine if a vehicle can be flat towed safely and without damage occurring. If you determine that your 2007 Suzuki XL7 can be flat towed you will need the following items: A base plate kit. I suggest the Demco Classic Base Plate Kit, # DM9518137. This is a confirmed fit for...
view full answer... - Parts Needed to Flat Tow a 2006 Mini Cooper SIf you haven't already check your owner's manual and make sure there aren't any restrictions preventing your 2006 Mini Cooper S from being able to be flat towed. The Roadmaster Base Plate Kit # 521876-1 will fit your Mini as long as you have a convertible. If you have a hardtop then you'll need the Blue Ox Kit # BX1303. I suggest the Optronics Magnetic Tow Lights # TL21RK. These bypass the Mini's wiring completely and will provide a 4-way connector at the front. The lights then mount...
view full answer... - Can the Roadmaster Tracker Tow Bar Be Bolted to the Frame or BumperThe Roadmaster Tracker Tow Bar part # RM-020 is designed to be used with a vehicle specific base plate kit. If you're just looking for something that can be bolted on yourself to the bumper or frame with no other parts then I recommend the Tow Ready Adjustable Tow Bar part # 63180. In order to remain legal you'll also need wiring like the Heavy Duty Magnetic Tow Lights part # TL21RK.
view full answer... - Recommended Parts to Flat Tow a 2001 Volkswagen New BeetleFor a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter for your 2001 Volkswagen New Beetle. Here are the parts I recommend for your vehicle because they are more cost-effective and easier to install: Base Plate Kit - # 521225-1 Tow Bar - # e44ZR (includes safety cables) Wiring - # TL21RK Brake System - # HM39494 High-Low Adapter - See attached article (bar mount height...
view full answer... - Parts Needed to Flat Tow a 1988 Jeep Cherokee Behind a RVBefore attempting to flat tow your 1988 Jeep Cherokee behind your RV, I strongly recommend checking your owners manual or with a local Jeep dealer to make sure your Jeep is flat towable. Some vehicles are not recommended to flat tow because the transmission could be damaged. If you determine you can flat tow your Cherokee, then you will need 5 basic towing components. First you will need a set of base plates. Base plates are vehicle specific and provide an attachment point for a tow bar....
view full answer... - Recommended Tow Bar and Base Plates to Flat Tow a 2017 GMC Sierra 2500The baseplate kit we have to fit your 2017 GMC Sierra 2500 is the Roadmaster MS Base Plate Kit # RM-3180-2. These are custom fit for your truck. For a compatible tow bar I suggest the Roadmaster BlackHawk 2 All-Terrain # RM-422. The BlackHawk 2 AT fits into the 2 inch receiver at the back of your RV. It connects to the MS Base Plates using included pins and clips. I've attached a video for you to check out. You'll also need safety cables, like # RM-653. For lighting you can use the...
view full answer... - Parts Needed to Flat Tow a 2000 Dodge Caravan with Roadmaster 5250 Tow BarWe definitely have the parts you need to flat tow your 2000 Dodge Caravan using your Roadmaster Falcon 5250 tow bar! For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. Here are the parts I recommend using: Roadmaster Crossbar-Style Base Plate Kit - 4-Cylinder # 242-1 or 6-Cylinder # 242-2 engine Safety Cables - # BX88196 Heavy Duty Magnetic Tow Lights - # TL21RK Brake...
view full answer... - Tail Light and License Plate Solution for Transporting Covered BikesThe best solution we have is to use the Thule License Plate Holder # TH35JV for the license plate part of your problem and then adding magnetic towing lights like the Wireless Hopkins # C6304 (you need 8 AA batteries # DU58QR) or Optronics # TL21RK so your tail lights are still visible. Since your Swagman XC2 Bike Rack # S64650 will be covered with the bag you'll need to get creative with the mounting straps for the Thule License Plate Holder but it's the best option for your application. To...
view full answer... - Tow Bar and Base Plates to Flat Tow 2013 Honda CR-VTow bars themselves are not specific to the vehicle you are towing, which is why you couldn't locate a list of vehicles your Aladdin BX4325 will work with. What needs to work with your 2013 Honda CR-V are the base plates, which is what the tow bar connects to. The base plates that fit your CR-V and work with the Aladdin BX4325 are the Blue Ox Base Plate Kit - Removable Arms # BX2258. I've attached a link to a review video and install of this kit for you to take a look at. You will also...
view full answer... - Tow Bar Wiring for 1993 Geo TrackerIf a vehicle has separate amber-color turn light lenses then it uses a separate lighting system. If there are not separate amber turn lights this means the system combines the stop/turn signals onto a single circuit. This is how a harness kit like # 119178KIT works. It takes in the separate stop light signal (on its red wire) and inside the converter module it combines this with both the right and left side turn signals. The green wire then carries right stop/turn signals and the yellow...
view full answer... - Parts Needed to Flat Tow a 1999 Ford F-350 with a 2005 Ford F-350We have one base plate kit that fits your 1999 Ford F-350, the Blue Ox Base Plate Kit, # BX2163. I recommend using the Blue Ox Avail Tow Bar, # BX7420. One advantage to using this tow bar is that it comes with the safety cables which are required when towing. It also has a 10,000 poud weight capacity. Along with the base plates, tow bar and safety cables, there are two more items that you will need to complete your flat towing setup. You will need a light kit and a supplemental braking...
view full answer... - What is Needed to Flat-Tow a 1986 Suzuki SamuraiBefore you begin purchasing the necessary equipment needed to flat-tow your 1986 Suzuki Samurai, you will want to review the "recreational towing" section of your owner's manual for any certain stipulations when flat towing your vehicle. In order to flat-tow your 1986 Suzuki Samurai with the Roadmaster Tracker Tow Bar part # RM-020 you will want to use the Roadmaster Classic Base Plate Kit part # 1003-1. As long as you have the crossbar which connects the two arms of the Tracker tow bar...
view full answer...
- What Items Are Needed to Flat Tow 2012 Mazda 5 Behind Class A MotorhomeFlat towing a car behind a motorhome requires a number of components. Each of these is explained in the linked overview article on flat towing. Some cars will require specific preparation steps before they can be flat towed and the car owner's manual will indicate if this is the case. You'll want to check the index in your Mazda 5 owner's manual under the heading 'recreational towing' to see if any steps are required before the car can be flat towed. I also included two other articles to...
view full answer... - Baseplate And Tow Bar Compatibility For A 1996 Geo Tracker The Roadmaster StowMaster Tow Bar # RM-501 is compatible with the Roadmaster Crossbar-Style Base Plate Kit # 118-15 so you shouldn't need any other components aside from some safety chains, like part # RM-643. If your StowMaster doesn't have the crossbar base assembly then you'll need part # RM-910012-00. You'll also need some lights like part # TL21RK in order to display your motorhome's traffic signals.
view full answer... - Flat Towing Wiring Recommendations Using an Opel Corsa to Flat Tow a Mazda Rusler LDVUnfortunately we do not have any custom fit wiring for either of the vehicles that you have mentioned. However I have included several helpful links below that detail flat towing wiring options for you. I suggest using the 7-way connector on the vehicle that will be towing the secondary vehicle and using one of the options listed below to activate the signals on the secondary vehicle. If you have the room for installing a bulb and socket kit like the # RM-154 is another option. This kit...
view full answer... - Cargo Carrier Recommendation for a 1-1/4 Trailer Hitch on a 2006 Toyota CamryA good choice for a hitch mounted cargo carrier for your 2006 Toyota Camry is manufactured by Pro Series. The 20 X 47 Pro Series Cargo Carrier. This carrier doesn't fold up - actually, none of the carriers that will fit your vehicles 1-1/4 hitch and hitch rating fold up. This cargo carrier's dimensions are 49-1/2 inches long X 21-1/2 inches tall. The # 63155 has actual railings to attach tie down straps. You will need to check your owners manual for your tongue weight rating. The # 63155...
view full answer... - Parts Needed To Flat Tow A 2004 Honda Civic Behind MotorhomeTo flat tow your 2004 Honda Civic you will need vehicle specific base plates, a tow bar, safety chains, a supplemental braking system, tow wiring for your Civic, and a wiring extension. For base plates, I recommend a Roadmaster kit. If your Civic is a Hybrid or standard model use # 521537-1. If you have an SI this will not fit. I recommend the Roadmaster Sterling, # RM-576. It'll pair nicely with either base plate kit and it includes safety cables and a wiring harness. I recommend...
view full answer... - Tow Bar Recommendation for Flat Towing a 1972 Chevy BlazerThanks for reaching out, Zachary! The only tow bar system that can possibly work with your older 1972 Chevy Blazer is the Curt Adjustable Tow Bar - Coupler Style for 2" Ball # C19745 which is more of a universal style and requires you to install the brackets directly to your vehicle. You'll also need the following to wrap up your flat towing setup: - Coiled Safety Cables # RM-643 - Magnetic Tow Lights # TL21RK - Brake Buddy Classic 3 # HM39494 Be sure to check your owner's manual...
view full answer... - Supplemental Braking and Tow Bar Lighting Kit Recommendation for 2016 Chevy Colorado 4WDThe permanently installed supplemental braking system I recommend for your 2016 Chevy Colorado that's getting flat towed is the SMI DUO part # SM99251. The reason I recommend this kit is because it's our installers favorite based on how easy it is to install and how well it works. The only type of lighting solutions we have for your truck that do not require any splicing are temporary install kits like the Optronics magnetic kit part # TL21RK. I'd recommend a diode kit though even though...
view full answer... - Will The Blue Ox Baseplate Kit # BX1298 Fit A 2006 Ford ExplorerYes, the Blue Ox Base Plate Kit # BX2198 would be compatible with your 2006 Ford Explorer and the Blue Ox Avail Non-Binding Tow Bar # BX7420. To complete your setup you'll also need the following components: Since you can't use splice-in diode wiring I recommend going with the Heavy Duty Magnetic Tow Lights - 20' Wiring Harness with 4-Way Flat Trailer Connector # TL21RK. For the braking system I recommend the Brake Buddy Select 3 Portable Supplemental Braking System # HM39524. This system...
view full answer... - Can a 2002 Volkswagen Passat Wagon with Manual Transmission be Flat TowedWhen it comes to flat towing a vehicle the car owner's manual is the best resource for determining if it can be flat towed at all and what preparations steps, if any, are required to ready the car for this kind of transport. In general, cars with a manual transmission are often easier to equip for flat towing than cars with an automatic transmission. I reviewed an online edition of the owner's manual for the 2002 Volkswagen Passat wagon but it did not confirm if the car can be flat towed....
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Tyler C
Updated by:
Tricia G
Updated by:
Adele M
Updated by:
Brian T
Video by:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Video Edited:
Zach D
Installed by:
Andrew S
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Steelhead
7/11/2016
one year later and still working perfect