bing tracking image
  1. Flat Tow Wiring Harness
  2. Chevrolet
  3. Tracker
  4. 2002
  5. Hopkins
FITS 2002 Chevrolet Tracker
Hopkins Magnetic Tow Lights - Red LEDs - 4-Way Flat Connector - Wireless

Hopkins Magnetic Tow Lights - Red LEDs - 4-Way Flat Connector - Wireless

Item # C6304
Retail:$224.99
Our Price: $130.29
You Save: $94.70
Flat Tow Wiring Harness
Confirmed to Fit
2002 Chevrolet Tracker

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
The best technical support and full flat tow wiring harness installation instructions. Great price Tracker flat tow wiring harness and expert service. Chevrolet Tracker, 2002 flat tow wiring harness by Hopkins are available from etrailer.com. For expert service call 1-800-940-8924 to order your Hopkins Magnetic Tow Lights - Red LEDs - 4-Way Flat Connector - Wireless part number C6304, or order online at etrailer.com.
  • All Info
  • Reviews (56)
  • Q & A (0)
  • Photos

2002 Chevrolet Tracker - Hopkins Magnetic Tow Lights - Red LEDs - 4-Way Flat Connector - Wireless

  • Removable Tail Light Kit
  • Bypasses Vehicle Wiring
  • Magnetic Mount
  • Hopkins
  • Universal

Removable LED lights provide signal lights for your towed car without you having to tap into the car's wiring or run wires under the car. Wireless transmitter plugs into your RV's 4-way connector and sends a signal to the magnetic lights.


Features:

  • Removable tow lights provide stop, tail, and turn functions for your trailer or towed car
  • No need to wire your trailer or tap into wiring on your towed car
  • Wireless transmitter eliminates the hassle of running cords to the lights every time you tow
    • Plugs into 4-pole flat trailer connector on RV or tow vehicle and mounts to the frame with a magnet
    • Emits a signal that triggers tow lights from up to 65' away
    • Operates on a standard 12-volt system
  • Heavy-duty, non-scratch magnets on the lights provide a secure grip without damaging your paint
  • Long-lasting LEDs are more efficient, faster acting, and brighter than incandescent lights
  • Sonically sealed lenses keep moisture out and prevent corrosion
  • Durable polycarbonate bases house batteries
  • On/off switch lets you use the lights as needed, conserving battery power
  • 8 AA batteries (not included) are required to power the lights
    • Flashing LED on driver's-side light indicates low battery
  • Department of Transportation compliant


Specs:

  • Application: towed cars or trailers no wider than 80"
  • Light diameter: 4"
  • Length of wire between lights: 106"
  • Transmitter wire length: 76"
  • 90-Day warranty


Hopkins Tow Lights mount on the back of your towed Chevrolet Tracker.

These wireless, removable tow lights make it easy to add running lights, brake lights, and turn signals to your towed car or trailer. With this setup, you won't need to tap into existing wiring for installation. With other magnetic tow lights, you have to run cords from the lights to the front of the towed car or trailer every time you need to tow. These tow lights work wirelessly to eliminate that hassle. And the wireless design also allows you to move the lights from one vehicle to another in minutes.


Hopkins Tow Lights magnetic base.

The lights attach directly to any metal surface with the included heavy-duty, non-scratch magnets, which won't damage your paint. And the handy on/off switch lets you use the lights only when you need them, saving battery power.


The 4-way connector plugs into your Chevrolet Tracker.The transmitter attaches to your tow Chevrolet Tracker via a heavy-duty magnet.

Setup is simple. Plug the included transmitter into the 4-way flat trailer connector on your RV or tow vehicle. The transmitter mounts to the frame of the RV or tow vehicle using the built-in magnet. Turn the switch on the driver's-side light to "on," and attach the tow lights to the back of the towed car or trailer, as far apart as is practical. Secure any excess wire between the 2 lights with a twist tie.


Each light is powered by 4 AA batteries (not included). A blinking LED indicator on the face of the driver's-side light signals low battery. This indicator should be checked every 2 hours to be sure your lights still have adequate power.



C6304 Hopkins International Wireless, Magnetic LED Trailer Towing Light Kit - 4-Wire Connector



Customer Satisfaction Score:


Customer Reviews

Hopkins Magnetic Tow Lights - Red LEDs - 4-Way Flat Connector - Wireless - C6304

Average Customer Rating:  4.6 out of 5 stars   (56 Customer Reviews)

Removable LED lights provide signal lights for your towed car without you having to tap into the car's wiring or run wires under the car. Wireless transmitter plugs into your RV's 4-way connector and sends a signal to the magnetic lights.

by:
2024 Ford F-150

Used these to tow aluminum body F150. Magnets strong enough to securely attach below rear bumper which is about the only steel part available. Super easy to set up and they work perfectly



by:
Honda

They work great on my Class C pulling my Honda CRV.



by:
2019 Thor Windsport Motorhome

I just received them and tested them out and they work great. They are very bright and responsive. I look forward to using them in the future when I tow my vehicle behind my RV.



by:

Haven’t used it yet. Looks good and delivery was fast.



by:

Very bright and quite easy to install



by:
2003 Chevrolet Malibu

VERY GOOD SERVICE I HAVE ORDER THINGS FROM FOR YEARS I THINK THEY ARE THE BEST BAR NONE



by:

Have issues with lights blinking erratic



by:

Ordered these because my car towing wiring had a problem and didn't have time to get it fixed. First set arrived but had a manufacturing defect and right hand light didn't work (not etrailer's fault!). Called etrailer and they were very accommodating in sending out a second set which arrived in time. The second set worked perfectly. Good service and extensive follow up by etrailer shows they care. I'll use them for other purchases any time!

John K.

1/15/2018

Still works great. Save us on a trip when the car to RV connection went [bad].



by:

No big deal, install batteries and put on toad !

Should have done this years ago before they cut into my tail light wiring and also had to deal with rusted out 4 prong plug in over the years.

Tom M.

7/10/2018

Still the best and not a problem, quality product



by:

Test connection went perfectly. Will see how it goes when we hit the road in May. The lights look well made and should last me a long time.

Thank for the great service!



by:
Lincoln MKZ

These things are the best thing since sliced bread!
We have a Lincoln MKZ that already has a hitch on the rear for towing a small enclosed trailer. The thought of having to "hard" wire in a wiring harness for towing behind the motorhome that would still allow the trailer to be towed was not a task I was looking forward to. etrailer suggested these as an alternative. Literally plug and play. Just plug the transmitter into the motorhome, install batteries and attach the magnetic based lights to the trunk of the MKZ and presto! DONE! I hooked the car up behind the motorhome and ran it down the freeway at 60-65 mph and all was good. Worked straight out of the box! Fantastic product!



by:

Wonderful product



by:
Saturn Ion

These work well, bright. They do eat up regular Duracell batteries. After first use of these I switched to Lithium Ion. The lights were noticeably brighter in the daylight sun. The life of the batteries has drastically improved service. I have a habit of removing the batteries when not in use to enable greater duration; they do have an on/off switch built in, but it's so simple to remove them in case of phantom degradation. Over-all, I am very happy with these and installation on the car is a snap. Love them so far. Would buy/recommend to others.



by:

Great looking lights, LED wireless hook up makes this an easy installation and easy choice.



by:

Works great no problems easy to install



by:
2011 Ford Taurus

Was absolutely 100% delighted with this product. Drove a total of 2600 miles in all kinds of weather and traffic conditions and these lights worked perfectly. Batteries lasted all most to the end of the trip. I'd recommend this set up to everyone who cannot afford to have wiring redone on a vintage trailer.



by:

I bought the wireless Hopkins tow lights to temporarily tow my new Jeep behind our Motorhome until I could wire the taillights permanently. I liked them so well that I have never wired the Jeep and only use the wireless taillights.



by:

very easy to see and use. I hope I never have to rewire another old trailer. Love them.



by:

Great customer service



by:

Great experience.Fast service.



by:

These have been a lifesaver for our camper lights not working properly. Never had an issue with these



by:
2010 Honda Element

I have not tried this yet, but the design is excellent! Having a magnet on the transmitter to attach to the tow vehicle was just icing on the cake!



by:

Great system



by:

Product appears to work as represented. Have not had it on the road yet.

Michael

3/28/2019

Lights work great, and battery life is better than expected. Only issue is potential for paint damage... I recommend that the manufacturer consider a softer landing pad to reduce potential for paint scratches.



by:

works just like Quinn said


25
56
Show More Reviews

See what our Experts say about this Hopkins Flat Tow Wiring Harness

  • Testing Operation of LED Magnetic Towing Lights
    The Hopkins Magnetic Tow Lights # C6304 you referenced require you to install 8 AA batteries in order to function so this is the first thing to check. LED lights of any type are generally highly electrically efficient. LEDs typically use about 1/10th as much power as an incandescent light. This high efficiency can sometimes "fool" certain vehicle's trailer wiring systems. In certain cases load resistors like # DI34ZR can be needed to mimic the higher power draw of standard incandescent...
    view full answer...
    Image 1 for
  • How to Flat-Tow a 2012 Nissan Juke AWD Behind Another Vehicle
    I was not able to reference a 45 mph speed restriction anywhere in the owner's manual for a 2012 Nissan Juke AWD. The speed restriction I found was 70 mph. However, the only AWD models that can be flat-towed with all four wheels on the ground are the ones with a manual transmission. If you have an automatic transmission then you will need to use a trailer with all four wheels off the ground. If you do have the manual transmission then in order to tow the vehicle behind your Jeep Grand...
    view full answer...
  • Will Optronics LED Magnetic Tow Lights Protect Against Scratching 2018 Ford Fiesta SE Paint?
    The Optronics Magnetic LED Tow Light Kit - Weatherproof - Red Lens - 20' Wiring Harness - Qty 2 # TLL21RK has a protective label pad on the bottom to keep from scratching paint. You can see this at the 2 minute mark of the attached review video. I do recommend wiping down the vehicle with a microfiber cloth before putting the lights on simply to remove any dust or debris that could be abrasive between the scratch free label and the paint for added security.
    view full answer...
  • Recommendations For Replacing A Burnt Out Bulb In Magnetic Towing Lights
    Most of the time the lenses on magnetic tow lights will be able to just pop off, but not always. If there is a gap between the lens and the base, it will work. If there is no gap and the lens is sealed to the base, you will need to replace the whole unit with something like the Hopkins Magnetic Tow Lights # C6304. The LED lights will tend to last much longer than incandescent lights and will draw less power, so it is highly recommended. If you do have the gap and can get the lens off,...
    view full answer...
    Image 1 for
  • Parts Needed to Flat Tow a 1997 Ford Ranger with a Reese Tow Bar
    A 2005 Ford Ranger and a 1997 Ford Ranger are different enough that you would not be able to use base plates from one on the other. You would need to get a new set for your 97, the Roadmaster XL Base Plate kit part # 435-3 would be an excellent choice. Now to get these base plates to work work with your Reese tow bar # 63180 you would need the Roadmaster Base Plate to Tow Ready Tow Bar Adapter # RM-025. For a lighting solution I would recommend the Hopkins Magnetic Tow Lights # C6304....
    view full answer...
  • Recommended Tow Bar Wiring Solution for 2004 Honda CR-V
    Generally speaking, your tow bar wiring is all going to have the same function- to provide signals to your vehicle lights. Some wiring differs in that it contains diodes to protect your vehicle's from electrical malfunction/backfeed and some of them have different connections to the RV. If your RV has a 7 way connection, then something like the Roadmaster # RM-15247 provides the best solution for protecting the vehicles from backfeed in the event of a short. If you've got a 4 way on the...
    view full answer...
  • Troubleshooting Magnetic Trailer Light Set Operation
    The ground circuit for this type of lighting is all tied to the white ground wire. First step I recommend is using a Test Light # PTW2992 to verify that the issues is with the light string and not the vehicle's 4-way. Looking at your 4-way plug connector it looks like you have 2 wires switched. The green wire is for your right turn signal/brake light and the white wire is the ground which both are correct on the 4-way. The yellow wire is for the left turn signal/brake light and brown...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Troubleshooting Wireless Tow Dolly Lights Where Only Left Tail Signal Works
    You've narrowed the problem down to being the wireless tow lights since you've tried them in a few vehicles with the same result. The easy solution would be that there's corrosion on the pins of the 4-way connector which is preventing the circuits from working like they should which would easily be fixed by taking sandpaper to them to clean them off. If it's not that though it's most likely an internal issue with the transmitter or the lights themselves.
    view full answer...
  • Base Plate Kit for 2013 Mini Cooper Convertible Towed with Demco Tow Bar
    We don't have any Demco base plate kits that fit your 2013 Mini Cooper convertible, but we do a Roadmaster with the part # 521879-1A but it would only fit if yours is an S model. You'd be able to use your current Demco tow bar with it with the adapter part # RM-033. For a wireless tow bar lighting solution that has two different light assemblies you'd want the Hopkins Tow Lights part # C6304.
    view full answer...
  • Troubleshooting Hopkins Magnetic Tow Lights that Dont Want to Power On
    In order for the # C6304 to function you would need to make sure that the batteries are installed properly in the light kit as well as make sure the power switch is turned on. This switch is at the bottom of one of the lights in a recessed opening. Check out the video I attached that covers everything on these lights if you have further questions. Or you can email me back if you are still having troubles.
    view full answer...
  • Can 7-Way and 4-Way Be Used Simultaneously for Tow Dolly and Lights?
    Since you have the 7-way and 4 way connections on your motorhome, you will have both wiring hot and ready to work. Some spring doors won't allow both to open at the same time like # HM40975 so some people will remove the door on the 4-way side to allow the door on the 7-way with the clip to help hold the 7-way plug in. Other styles like # HM40920 will allow you to use both connectors without any adapting necessary. It sounds like you are wanting to use the Roadmaster Tow Dolly # RM-2050-1...
    view full answer...
    Image 1 for
  • Tail Light and License Plate Solution for Transporting Covered Bikes
    The best solution we have is to use the Thule License Plate Holder # TH35JV for the license plate part of your problem and then adding magnetic towing lights like the Wireless Hopkins # C6304 (you need 8 AA batteries # DU58QR) or Optronics # TL21RK so your tail lights are still visible. Since your Swagman XC2 Bike Rack # S64650 will be covered with the bag you'll need to get creative with the mounting straps for the Thule License Plate Holder but it's the best option for your application. To...
    view full answer...
  • Can Hopkins Magnetic Light Kit part # C6304 Plug into Vehicle 7-Way
    Yes you can plug the Hopkins Magnetic Light Kit part # C6304 into the 7-way of your RV but you'll need to use a 7-way to 4-way adapter like part # HM47365 as well.
    view full answer...
  • Recommended Flat Towing Setup For 1982 Jeep CJ-7
    I would be happy to recommend a flat towing setup for your 1982 Jeep CJ-7. Since the only base plate kit confirmed to fit your Jeep is the Demco Classic Base Plate Kit # DM9518112 which will work with the standard front bumper, you will not be able to use the Roadmaster StowMaster Tow Bar # RM-501. Luckily there are other tow bars out there that will work great with this base plate kit. I recommend using the Demco Commander II Non-Binding Tow Bar - Victory Series # DM9511012 which has...
    view full answer...
  • Temporary Trailer Light Recommendation
    The closest thing to what you described would be the Hopkins Magnetic Tow Lights # C6304. These are tow lights designed for temporary use when flat-towing. You would have to check with your local laws and regulations on trailer lights, but technically these would work well for you. These lights attach with powerful magnets.
    view full answer...
  • Recommended Tow Bar Wiring for 2018 Ford Edge SEL to Flat Tow Behind Motorhome
    There is not a custom fit tail light wiring kit like # HM56011 for your 2018 Ford Edge SEL model. That is only a fit for Sport and Titanium models. For your SEL model, I recommend the Hopkins Magnetic Tow Lights - Red LEDs - 4-Way Flat Connector - Wireless # C6304 for your tow lighting needs. There is not a confirmed fit for anything other than a lighting system that bypasses your factory lighting at this time.
    view full answer...
  • Can Roadmaster Tracker Tow Bar Be Used to Flat Tow 2006 Hummer H3
    The Roadmaster Tracker Tow Bar part # RM-020 can easily be used to tow your 2006 Hummer H3 once you install the Roadmaster Base Plate kit part # 2505-1 which is a confirmed fit. I attached an install video for this for you to check out as well. For safety cables you then would want the part # RM-643, for lighting you would want a universal, magnetic kit like part # C6304 which won't require an installation. And finally, most states now require supplemental braking in the vehicle being...
    view full answer...
  • Compatible Base Plates for 2004 Honda Pilot to Work with Roadmaster StowMaster 5000 Tow Bar
    We do offer Roadmaster base plates for your 2004 Honda Pilot. Roadmaster offers two types of removable-arm base plates, for both Pilots with and without brush guards. If your Pilot has the brush guards you will use # 1544-3 and if it does not have them you will instead use # 1544-1. Please note that the # 1544-1 base plate is compatible with your Stowmaster 5000 but the # 1544-3 is not. Blue Ox also offers base plates for your Pilot, but these are intended for use with Blue Ox tow bars,...
    view full answer...
  • How to Flat-Tow a 2004 Saturn Ion Behind a Pickup Truck
    I am not sure what you mean by "mid" but the only 2004 Saturn Ion that can be flat-towed with all four wheels on the ground are the ones with a manual transmission. If you do have a manual transmission then you will need a base plate kit, tow bar, flat-tow wiring harness, safety cables, supplemental braking system, and possibly a high-low adapter. I have attached my recommendations for each of these parts below. For a base plate kit I recommend the Demco Classic Base Plate Kit part # DM9518151...
    view full answer...
  • Flat Towing Wiring/Lighting Options for 2004 Jeep Wrangler
    Unfortunately the 4-pole trailer wiring harness on the rear of your 2004 Jeep Wrangler cannot be used in "reverse" to allow it to function for flat-towing purposes. You will need to un-install that item and use a dedicated flat towing wiring harness or light kit. For your Wrangler we have several types of kits, shown on the linked page and described in the linked article of flat towing. These include simple magnetic light kits like # TL21RK, add-on bulb and socket kits like # RM-155 (incandescent)...
    view full answer...
  • Tow Bar Lighting/Wiring Options for Flat-Towing a 1994 Jeep Wrangler
    The Roadmaster Universal Hy-Power Diode Wiring Kit you referenced, part # RM-154, will work on your 1994 Jeep Wrangler. This kit includes the 4-pole connectors, diodes and wiring components for installation that will allow your Wrangler tail light bulbs to operate in tandem with your RV. This is a great option for frequent flat-towing. I have linked an install video for your reference. A simpler option, and one that does not require any alteration to your toad wiring, is to use a plug-in...
    view full answer...
  • How to Use Hopkins Magnetic Tow Lights With Supplemental Braking System
    My Recommendation is to use the Hopkins Endurance Multi-Tow Twist-Mount 7-Way RV and 4-Way Flat Trailer Connector, # HM40920. This provides the 7-way RV style you already have in place with a 4-way flat along side of it. Connect your Hopkins Magnetic Tow Lights, # C6304 with the 4-Way connector.
    view full answer...
  • Recommended Roadmaster Flat Towing Components for 2010 Pontiac G6
    For the most discreet appearance on your 2010 Pontiac G6 I recommend the Roadmaster XL Base Plates # 3165-1 because once you remove their arms the car will look almost exactly as it did before installation. For your tow bar you can use the Roadmaster Falcon 2 # RM-520 which has been rated with an almost perfect satisfaction score from our customers. For safety cables use part # RM-643; their coiled design prevent dragging on the ground. For a braking system I suggest one of the Blue Ox...
    view full answer...
  • Can a 1995 GMC C/K Series Pickup Be Towed Behind Another Vehicle
    It is possible to flat-tow a 1995 GMC C/K Series Pickup. However, you will need a lube pump if you have a C1500 or you will need to disconnect the drive shaft if you have a K1500 without manual transfer case. In order to flat-tow the vehicle you will need a tow bar like the Curt Tow Bar with Adjustable-Width Arms part # C19745 and a lighting kit like the Hopkins Magnetic Tow Lights part # C6304 at the very least.
    view full answer...


< Previous
123. . .5



Do you have a question about this Flat Tow Wiring Harnes?


Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Zack K
Video Edited:
Zack K
Employee Dustin K
Video Edited:
Dustin K
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Patrick B
Video by:
Patrick B
Employee Matthew K
Installed by:
Matthew K
Employee Cole B
Installed by:
Cole B
Employee Bradley B
Installed by:
Bradley B
Employee Rachelle B
Written by:
Rachelle B
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Daron K
Updated by:
Daron K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.