Roadmaster Stop Light Switch Kit - Jeep Liberty
(7 reviews)
Price: $50.58
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (7)
- Q & A (0)
- Photos
Roadmaster Tow Bar Braking Systems - RM-751430
- Stop Light Switch
- Roadmaster
Avoid damage to your vehicle by ensuring that your supplemental braking system is properly positioned and working effectively. Kit activates your RV monitoring system to alert you when the brakes of your towed car are being applied.
Features:
- Activates motorhome brake-monitoring system whenever brake pedal in towed car is applied
- Ensures that the supplemental braking system is functioning properly
- Works great for any application that does not have a tow position in the ignition
- Wires directly into towed car's fuse box for constant current
- Made in the USA
Specs:
- 12 Volts
- Application: custom fit for your vehicle
This kit allows your RV's monitoring system to alert you whenever the brake pedal of your towed car is being applied. Other systems operate according to whether the air cylinder is extended and provide no indication of what is happening with the pedal itself. If your supplemental braking system is improperly installed, it may be continuously pressing on the pedal, impeding it from fully retracting and possibly causing damage to your vehicle's tires and braking system. With Roadmaster's Stop Light Switch Kit, you will always know when the brake is being depressed, and you will avoid costly damage.
751430 Road Master Stop Light Switch Kit
Installation Details
This Product Fits The Following Vehicles
- 2008 - 2011 Jeep Liberty
Customer Reviews
Roadmaster Stop Light Switch Kit - Jeep Liberty - RM-751430
Average Customer Rating: 5.0 out of 5 stars (7 Customer Reviews)
Avoid damage to your vehicle by ensuring that your supplemental braking system is properly positioned and working effectively. Kit activates your RV monitoring system to alert you when the brakes of your towed car are being applied.by: Neal03/24/2023
etrailer is awesome to deal with, very knowledgeable and helpful. We would highly recommend this company for sales and installation.
by: Kevin06/04/2019
Perfect fit. Nearly impossible to work under the dash these days but after watching the install video I was able to reach up and do the install "by feel". (note: you will need an extra deep 13mm socket for the Jeep Liberty) Had a near disaster with the brakes on the toad nearly destroyed from a malfunction of the brake controller. Hoping this will give me a heads up if there is ever another malfunction. At least a little more peace of mind.
by: Randolph 03/30/2020
Great .got brake switch for brake controller would of never known if it weren't for your your tube people. Your kit with metal bracket fit perfect. My brake controller now works
by: Mark 12/20/2021
Fits like a glove.
by: Ronnie10/03/2018
Works like it is supposed to. Installation fairly easy.
by: Ben B09/01/2015
shipped quick and was just as it was described. worked great
by: Peter03/26/2024
7
7
See what our Experts say about this Roadmaster Tow Bar Braking Systems
- Recommended Seat Adapter For The Roadmaster Brakemaster In A 2011 Jeep LibertyYes, the RoadMaster BrakeMaster Custom Seat Adapter # RM-88149 is the correct adapter to install the Roadmaster BrakeMaster System # RM-9160 in your 2011 Jeep Liberty. Note: You will also need the Roadmaster Stop Light Switch Kit - Jeep Liberty # RM-751430 to ensure that your supplemental braking system is properly positioned and working effectively. This kit activates your RV monitoring system to alert you when the brakes of your towed car are being applied.
view full answer... - Parts Needed To Install The Roadmaster BrakeMaster # RM-9160 In A 2011 Jeep Liberty To install the Roadmaster BrakeMaster System w BrakeAway for RVs w Air or Air Over Hydraulic Brakes - Proportional # RM-9160 you'll also need the RoadMaster BrakeMaster Custom Seat Adapter # RM-88149 to properly position the supplemental braking system in your 2011 Jeep Liberty. You'll also need the Roadmaster Stop Light Switch Kit - Jeep Liberty # RM-751430 to signal you when the brake pedal of your Jeep Liberty is being depressed. Other than those two items the # RM-9160 will come with...
view full answer... - Tow Bar Braking and Lighting Kit Recommendation for 2009 Jeep LibertyYour RV may have separate taillight circuits, but if it has trailer wiring installed on it those circuits will be combined at the trailer connector as that is the standard trailer wiring configuration. Also, your Liberty may have separate taillights as well but you can still wire that setup to a 4 diode kit like the # RM-154 since this will allow your blinker/stoplights be be carried on the same bulb. I like the part # RM-15267 as it comes with some extra wiring and adapters to make the...
view full answer... - Wiring Instructions for SMI Stay-IN-Play DUO on 2008 Jeep LibertyThe SMI Stay-IN-Play DUO Supplemental Braking System # SM99251 referenced in your question does not require separate brake and turn signals to operate properly. However, if you want to use the separate turn signals on your 2008 Jeep Liberty, then I recommend installing the Roadmaster 6-Diode Universal Wiring Kit # 154-792-118158 to connect the Jeep's lighting system to your RV's. To let the Jeep's system operate the brake lights, the red wire coming from the converter on this wiring kit...
view full answer... - Can a 2010 Jeep Liberty Renegade Be Flat-TowedThe 2010 Jeep Liberty could have came in either a four wheel drive or two wheel drive configuration. The four wheel drive models can be flat towed with all four wheels down whereas the two wheel drive models cannot. If you have a Renegade then you have four wheel drive so it can be flat-towed. If you take a look at page 406 of your owner's manual, this is explained for you. In order to flat tow the vehicle you are going to need a tow bar, base plate kit, safety cables, tail light wiring...
view full answer... - Flat Tow a 2009 Jeep Liberty, What is NeededYes it is and we can help you put together a complete package to flat-tow your 2009 Jeep Liberty. Please note the link to help article that I have attached with information listed below. You will need: - Base plate kit - Tow bar - Flat-tow wiring harness - Safety cables - Supplemental braking system - *Possibly a high-low adapter. Please links for each item below: Base plate kit, I suggest the Roadmaster Base Plate Kit # 521434-1. This is a confirmed fit for your 2009 Jeep Liberty....
view full answer... - Parts Needed to Flat Tow a 2009 Jeep Liberty with a 1999 Lazy Daze 26 ft Motorhome V10Yes, there are parts available that will allow you to flat tow your 2009 Jeep Liberty. The first thing to check is the vehicle owners manual for specific information on flat towing the Liberty. The first thing you are going to need are base plates. The base plates, # BX1976, will provide the proper and safe attachment point on your Liberty for the tow bar. For a compatible tow bar I recommend the Alpha, # BX7365. It comes with safety cables and it is rated for 6,500 pounds. If you are...
view full answer... - Blue Ox Replacement Baseplate Tab and Flat Towing System for 2011 Jeep Liberty 4x4For your 2011 Jeep Liberty, the Blue Ox baseplate you have is # BX1976. The Replacement Attachment Tab Assembly for Blue Ox Baseplates - 7-1/2" Long # BX62-3468 are the correct fit for your baseplates. Because you just bought this, I recommend the following compatible equipment to flat tow your vehicle. Blue Ox Alpha Tow Bar - Motorhome Mount - 6,500 lbs # BX7380 (comes with safety cables) Blue Ox Base-Plate and Receiver Lock Kit - Qty 4 # BX88177 Roadmaster Diode 7-Wire to 6-Wire...
view full answer... - Parts Needed to Flat Tow a 2008 Jeep LibertyThe Blue Ox Base Plate kit part # BX1976 that you referenced is the correct base plate kit for your wife's 2008 Jeep Liberty. It sounds like your Liberty may have the rock guard or skid plate, which this kit will replace once installed. For a compatible tow bar I recommend the Alpha, # BX7380. It comes with safety cables and it is rated for 6,500 pounds. If you are looking for a more economical option you can use the Adventurer, # BX7322, but it does not come with safety cables and it...
view full answer... - Flat Tow Parts for 2010 Jeep LibertyThe Crossbars you identify appear to be Roadmaster Crossbar-Style Base Plate Kit, # 3136-1. This fits a Saturn Ion. For your 2010 Jeep Liberty, yes you are correct that you need the Roadmaster EZ Base Plate Kit with Removable Arms, # 521433-1 and this will match to your Roadmaster Falcon 2 Tow Bar, # RM-520. For wiring I suggest the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit, # RM-15267. If you need supplemental braking, I suggest the Stay-IN-Play DUO Supplemental Braking...
view full answer...
- How to Flat Tow a Second Generation Jeep Liberty 2008-2011In order to flat-tow a second generation (2008-2011) Jeep Liberty with all four wheels on the ground you will need a base plate kit, tow bar, flat-tow wiring harness, safety cables, supplemental braking system, and possibly a high-low adapter. I have attached my recommendations for each of these parts below. For a base plate kit I recommend the Roadmaster Base Plate Kit part # 521434-1 if you have a have rock guard or skid plate excluding Renegade, part # 521433-1 if you do NOT have a...
view full answer...
Do you have a question about this Tow Bar Braking System?
Info for this part was:
Video by:
Zack K
Test Fit:
Rick A
Test Fit:
David F
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Shelly K
Updated by:
Hannah L
Updated by:
Mike S
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mark R.
12/21/2022
Great I love it