Demco Stay-IN-Play Duo Braking System for RVs w/ Hydraulic Brakes - Wireless Monitor - Proportional
Item # DM86VR
Retail:$1,590.00
Our Price: $1,349.00
You Save: $241.00
Confirmed to Fit
2017 Ram 2500
with adjustable pedals
without adjustable pedals
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (593)
- Q & A (0)
- Photos
2017 Ram 2500 - Demco Stay-IN-Play Duo Braking System for RVs w/ Hydraulic Brakes - Wireless Monitor - Proportional
- Hydraulic Brakes
- Brake Systems
- Proportional System
- Fixed System
- Demco
- Power Assist Brake Compatible
Plug in and go: this permanent system gets you smooth, reliable braking with a one-and-done installation. Low-profile components stay out of sight. Includes convenient wireless Coachlink.
Features:
- Guarantees smooth, reliable braking
- Reads RV's brake light signal to ensure system only activates when you actually hit the brakes
- Senses the rate of your RV's deceleration and triggers your towed car's brakes to slow down at the same rate
- Lets you adjust braking sensitivity to suit your vehicle and your preference
- Plug-and-play
- System automatically turns on when your towed car is connected to the RV
- Components install permanently and stay tucked out of sight
- Monitors your towed car's braking with the wireless Coachlink
- LEDs lights up and alarm beeps when the brakes are applied
- Transmitter connects to reed switch on brake of towed car to ensure accurate reading
- Avoids damage from over-braking by reactivating car's vacuum-assisted braking
- Includes breakaway system and all necessary components
- Made in the USA
Specs:
- Application: motorhomes with hydraulic brakes
- Compatible with hybrids and other cars with continuous-power-assist brakes
- Operating unit dimensions: 8" long x 5" wide x 2-1/4" tall
- 5-Year warranty
"This is the top system I recommend if you have hydraulic brakes. Quality, reliable, tried-and-true. It just always works."
Do I Need a Braking System for Flat Towing?
A braking system is a must when towing a vehicle behind your motorhome. Without it, the weight of the towed car can create a safety hazard, strain your RV's brakes, and affect the warranty of both your car and motorhome. Most states legally require a supplemental braking system, so if you don't use one and you end up in an accident (which is more likely since your RV takes longer to come to a full stop), your insurance and liability headache just doubled. You also won't have any breakaway system; if there's an accidental disconnect, there's nothing to bring your car to a stop.
Pros of a Permanent System
The Stay-IN-Play Duo is a permanent braking system, which means that it's a one-and-done. Once it's installed, there's no more setup that you have to do. When you plug in the power cord at the front of your vehicle, the system automatically turns on. Flip the on switch for the G-Force controller and just like that, you're ready to flat tow.
While the components are installed permanently in your RV and toad, they remain concealed and inconspicuous. None of them will interfere with normal driving, and most of the time they are invisible. And you don't have to find a place to store them between trips.
How Does the Demco Stay-IN-Play Duo Work?
The Stay-IN-Play Duo is unique in that it uses both an inertia sensor and your motorhome's brake light signal to activate. Having this double-check ensures that the system will only activate when it's truly needed.
First, the Duo monitors your motorhome's brake light signal so that it knows when you're intentionally hitting the brakes. This ensures there's no false braking.
Second, the inertia sensor in the Duo senses the change in momentum of your toad (towed vehicle) as your setup slows down. It precisely measures this change so it can activate your toad's brakes to match the rate of the RV's deceleration; this is what makes it proportional. When you apply the brakes in your motorhome, the braking system will engage the brakes of the toad at the same time with the same amount of force. This keeps the RV and the toad in sync with each other, so whether it's a gradual slow down to a red light or a hard stop in an emergency, the toad and the RV will brake together.
It starts with the G-Force controller. The G-Force controller contains the inertia sensor that senses the change in your RV's momentum. You'll install it in the cab of your toad, underneath the dashboard. This keeps it out of the way but easy to reach so you can flip the toggle and adjust the knob.
Note: The G-Force controller must be pointed in the direction of travel - with the toggle switch facing the driver's seat - for the internal sensor to function properly.
The controller lets you adjust the sensitivity of the inertia sensor to determine how drastic the change in momentum must be for the system to trigger. Set the sensitivity low and the Duo will only engage when you forcibly step on your motorhome's brake pedal. Set it high and a mere tap on the brakes will get a reaction. It's totally up to you how sensitive you want it to be; a heavier vehicle will probably need more sensitivity, while a lighter one doesn't need to brake so hard. The knob on the face of the controller lets you easily program your setting.
When the G-Force controller detects a change in inertia, it checks that there's a brake light signal from the RV to confirm that it is indeed braking. It then sends a signal to the main operating unit to activate; the main unit delivers pressurized air through an air line to the actuating cylinder that attaches to your toad's brake pedal. The cylinder will pull the pedal down, applying your brakes almost instantaneously.
The actuating cylinder attaches permanently to the arm of your toad's brake pedal. Though it is permanent, it should not interfere with your everyday driving. In most vehicles, it is tucked up where you can't even see it.
Vacuum Pressure Creates Smooth Braking
When you're drivng, your vehicle uses vacuum pressure to create the force needed to bring the car to a stop. On most vehicles, this vacuum-assist function does not work when the engine is off. As a result, a lot of supplemental braking systems have to use an excessive amount of pressure while braking the toad.
The Duo, on the other hand, reactivates the vacuum-assist function by tying into your car's vacuum line. Your car will break evenly and naturally as it's being towed, so there's less risk of damage.
Built-In Safety Features
Included in this kit is the wireless Coachlink for safety and peace of mind. This monitor, sitting on the dashboard of the RV, will light up and beep whenever your toad is actively braking. This will give you a simple and convenient way to keep tabs on whether the system is working properly or if something is going wrong.
Most supplemental braking systems have a method of letting you know you when they activate, but not all of them are checking if the toad is actually braking. There could be an error that causes the system to activate without actually applying the toad's brakes. Or your brake pedal might actually be continuously depressed when it shouldn't be. But unless you have a system that's monitoring your vehicle, you won't know it until the damage is already done.
The Duo also comes with a breakaway switch, an absolute must for safe flat towing. If there's ever an emergency situation where your toad becomes detached from the motorhome, the breakaway switch will immediately activate the brakes and bring the vehicle to a stop.
This switch mounts to the front of your toad and wires into the Duo's operating unit. It includes a pin that connects to your RV's hitch receiver with a breakaway cable. If the toad and RV become disconnected, the cable will pull the pin out of the switch and trigger the braking system. A reserve air supply in the operating unit will then apply the brakes in the car.
What You Need to Flat Tow
Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
To flat tow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system.
| For the RV | Between the RV and Towed Car | For the Towed Car |
|---|---|---|
| Hitch | Tow bar | Base plate |
| Wiring plug | Safety cables | Braking system |
| Wiring adapter cord | Wiring kit/diodes |
The custom-fit base plate installs on the frame of your toad so you can connect the car to your RV with a tow bar. Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
9599018 Demco SBS - (Formerly SMI) Stay and Play DUO Supplemental Braking System for Motorhomes with Hydraulic Brakes with Wireless Coach Link Braking Monitor - Proportional
Installation Details
Alternate Instructions
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Demco Stay-IN-Play Duo Braking System for RVs w/ Hydraulic Brakes - Wireless Monitor - Proportional - DM86VR
Average Customer Rating: 4.8 out of 5 stars (593 Customer Reviews)
Plug in and go: this permanent system gets you smooth, reliable braking with a one-and-done installation. Low-profile components stay out of sight. Includes convenient wireless Coachlink.by: Jim05/02/2024
2023 Jeep Wrangler
I installed this system in a 2023 2 door Wrangler. I also used an etrailer base plate and etrailer tow bar. I had originally purchased a Demco Delta Force Braking System. However, with the shape of the floor in the Jeep I was unable to use this unit. There are various places to install the stay n play duo in the Wrangler and the etrailer installation videos show this. I elected to install mine under the drivers seat as I wanted to keep it out of the elements. I fabricated a sheet metal bracket to mount it on that allows the rear seat heater duct to function unimpeded.
Once installed the unit is out of sight and very simple to use. Just a flip of the toggle switch and its ready. I only needed to make a few adjustments to have it brake the way jeep the way I wanted. This is also a very simple procedure.
I highly recommend this unit and appreciate all of the information etrailer has on their site to aid in the procurement and installation of their products.
by: Edward03/13/2024
It took me a couple days to get this installed,I'm not as flexible as I was so that didn't help. However I followed the instruction steps and got it done.Had to adjust the sensitivity a few times until it was the way I wanted.System works good and I get a alarm when brakes are activated. This gives you peace of mind knowing your brakes are not applied when they shouldn't be. Very Happy with it,just have to flip a switch when towing.
by: Deborah04/20/2023
eTrailer was very helpful in choosing the correct hitch for our rv and car. They also provided a special brake application in the car that makes it super easy for toad braking.
I am 72, and I hook up this toad and pull it with confidence. The instructions to hook up the toad was presented with ease. They knew exactly what they were doing, and we didn't rush through the demonstration. I would recommend eTrailer to anyone.
by: Tim L.07/24/2023
2023 Chevrolet Equinox
Installed 6/17/23 on a 2023 Equinox LT (AWD). Installation was pretty straight-forward. I mostly followed etrailer's videos. Note that the pneumatic cylinder needs to be mounted fairly high on the brake pedal arm so you have a 'square' profile to clamp onto. This vehicle has an electronic brake booster rather than pneumatic, so follow Demco's instructions regarding this variation. The wireless coachlink works great. I couldn't be happier with this system.
by: 10/13/2023
Very easy install, and the videos on E-trailer helped a bunch! I opted to put the controller and wireless link on the passenger side, because there was more room there, but the controller is still properly orientated. Be sure to leave enough slack in your wiring if you decide to mount the operating unit on the fuse box, so you'll be able to remove the cover later. Happy trails!
by: David 02/21/2024
2019 Ford Fiesta
First I have never installed a braking system before, and I was somewhat unsure if I would be able to complete the install without issues, but this worked exactly as described in the written instructions and provided video's. I took my time to verify each step and that all the electrical connections were solid (very important). Following the instructions and the video made it possible for me to install the system and have it function exactly as described. All you need is some good basic idea of how the system works, how to make electrical connections as well as follow written instructions backed up by video to install this yourself. Of course, having eTrailer there to answer any questions was a major factor for me to purchase this unit from them. If you are thinking about adding a tow vehicle braking system this is the one for you too.
by: Lincoln05/04/2021
This is a really nice braking system. It works EXACTLY as described. Engine breaking does not trigger breaking (because it's tied into the break light circuit). And breaking truly is proportional. Light braking and it does not engage activate braking. The remote wireless coach receiver shows you how hard the car is breaking, and IS proportional to the breaking in the Coach. When the car is breaking the wireless receiver shows you, at three levels (the number of lights lit from one light to three) how hard the towed is braking. i HIGHLY recommend the wireless unit for breaking notification.
Instructions were very clear. I studied my 2004 Pontiac Vibe (same as Toyota Matrix), and watched a bunch of online videos on installing this product. This is a particularly good car for a toad, because it is so light. (2700 lbs curb weight -- and it rolls really freely).
Installation was particularly painful under the dash where (as a tall person) I had to contort myself into all kinds of uncomfortable shapes with various padding) to reach up under the dash panel . There is just no easy way I could find to remove the lower dash panel without taking about whole dash board. So just figuring out the cold side of the break switch was very difficult. It was impossible to get a probe on the break light switch plug. I ended up clipping a wire junction connector on to the (green wire coming of the brake switch after unplugging the wire harness) and then probing that after plugging it back in. I guessed right, It's the green wire that is the cold side of the switch. For someone who reads this you don't have to guess. I've done it for you
On this car I was concerned about going through the firewall and puncturing the break booster when mounting the cable terminal for the actuating cylinder. In the end, where I needed to go through the firewall was nowhere near the booster. It also turned out trying to use the self taping screws was just too hard. I wanted to use the reinforcing plate, but ended up loosing it under the carpeting. Finally I decided to just drill a 1/4" hole through the firewall (just northwest of a little dimple in the firewall), and bolt the cable cable terminal to the fire wall with a 1/4x20 combo head machine screw, and a fender washer, lock washer, and nut on the engine side of the firewall. I put silicone on the washers and nut, to prevent corrosion. I had just enough room under the car to get a wrench onto it. It would have been nice to have a car lift in my garage, but I did this work by blocking the car up on jack stands. My son held the bolt on the inside of the car. while I tightened the nut on the engine side of the firewall.
Another problem was: where to mount the operating unit in the engine compartment? I struggled with this until I found an online video of an installation on a Honda, where the tech mounted the operating unit to the engine cover. This worked out well, and made for easy routing of the vacuum lines both to the vacuum line between the engine and the brake booster, and through the firewall grommet to the actuating cylinder.
I mounted the wireless sending unit on the dash at the driver's A pillar, and the control unit on the passenger side, where there was much more room, routing the wires behind the center console over the the drivers side to go through the firewall. Calibration (adjusting the control unit position) worked exactly as describe. I set it and I was done.
In the end, though a painful install process, ESPECIALLY above the foot pedals under the dash, I know I am going to LOVE this system. To setup for towing: just flick the switch on the control unit, and hook up the car. No other special setup is required.
by: Terry 03/15/2024
My E-trailer experience was outstanding! From the great selection guide to the delivery to the installation support. The installation videos were very helpful. I had two installation issues that were answered with a prompt phone call. One call was on a Saturday morning. I highly recommend E-trailer!
by: Timmy04/11/2024
2023 Jeep Wrangler
I've used this setup for a year towing a 2023 Jeep Wrangler . I 100% recommend it for anyone else. Under normal conditions it is very easy. Under stressful conditions (bad weather, uneven terrain, need to connect/disconnect quickly) it is a life saver.
I am 63 and I can connect/disconnect this in 5 minutes.
by: Jeffrey11/18/2021
These installation photos are for the Demco Duo Play braking system install on a 2018 Ford Fusion Platinum Energy with push button start.
Jeffrey
11/19/2022
I works perfect every trip. I do a hard braking test at the beginning of every trip. The wireless monitor in the motorhome immediately reports the functionality of the braking system. I am very satisfied with this product. I installed everything myself.
by: Bill C03/28/2024
I received this yesterday and have not yet installed it. The FedEx driver handed it to me as it was raining. The outer cardboard container was slightly damaged as the packaging is compromised my cutouts so the brand and description show. Overall, I am quite pleased with Etrailer. The vehicle fit information and instructional videos are especially helpful.
by: Larry04/04/2024
etrailer is my GO TO place for everything. The people there are fantastic to work with. The go out of their way to assist in anything possible. If you haven't experienced working with etrailer, you are definitely missing out.
by: John03/16/2024
2020 Chevrolet Sonic
I ordered the wrong braking system. They were very helpful with the return and ordering the right braking system. Highly recommend anyone to deal with etrailer
by: Bobboots10/21/2023
2017 Mini Cooper
The Duo System took about 8 hours to install on a 2017 mini cooper s 4 door due to tight space everywhere. The etrailer video was very helpful although I atteached to vaccuum line in a much easier location up next to the Vaccuum unit on the firewall. The video also recommended using heat-shrink crimp connectors which are not supplied by Demco. The fuse-holder is also crappy and the 20A fuse has slipped out of the holder with the cover closed, so I ordered a waterproof 20A circuit breaker and tossed the unreliable fuse holder which failed on my first trip. Demco also provides no indicator LED to show that the braking system switch is on and it is powered up and ready to function. This is asafety issue that should be addressed. For the cost of this system, these few simple enhancements would ensure that it works reliably for many years.
by: Michael 09/07/2022
2018 Jeep Wrangler
Works great. It takes some time to install but worth it for the ease of use after. I installed the same system on my 2018 wrangler without the coach link monitor, used it over 4 years and 18,000 miles without a problem. I like the addition of the coach link monitor as the light is right in front of you.
Michael
9/9/2023
1 year with 4,000 miles of use and still working great. No problems.
Mike L.
11/1/2023
@Michael Niice! Glad to hear that!!
by: Victor03/09/2022
2019 Ford F-150
Appears to be working as expected, will be going on our first long trip in April to confirm.
instructions are generic so some judgment calls needed to be made for my 2019 F150 Raptor. I ended up placing the vacuum hose in the booster in the sensor hole, and placing the sensor at the end, rather than splicing into the preformed hose. Not a project to rush thru.
Victor
3/10/2023
Last April 2022 we went on a 2 month 6000 mile journey, pulling steep grades, raging thunderstorms, and some hot and dry days, all without any issues with the braking system. Very satisfied.
by: Ron 10/13/2023
Extremely difficult to install. Installation Instruction need to be interpreted rather than followed.
However, once installed, braking on the toad is amazing. I went from no brakes to this brake system. Significant difference.
by: DIY installation on 2018 Jeep Wrangler JL 4-Dr Unl08/23/2023
2018 Jeep JL Wrangler Unlimited
DIY installation on my 2018 Jeep JL unlimited 4-Dr went perfectly. I watched the video (a 2018 like mine) and followed along as I installed and it turned out just as the video showed. I added marine grade shrink wrap on all of the wire crimps, added the coiled split conduit wherever I could. Trying to Zip tie the wireless transmitter under the dash wasn’t working out for me so I cut two strips of double sided automotive tape and secured it to the metal dash support. Then I installed the towed vehicle wiring kit again following the Jeep JL videos. A lot of crawling around fishing the wiring through the side box railing…but doable. The only tedious part of this installation was finding good spots for mounting the emergency brake plug and the 6-way outlet on my heavy duty aftermarket winch mount bumper. My towed vehicle battery maintainer wiring should arrive shortly to complete my wiring.
Lastly, I ordered adapter 1” D-Ring brackets to fit the Roadmaster Nighthawk tow bar (checked with Cliffs in Scottsdale to inspect my aftermarket bumper first)….fit like a glove and easy to install on the tow bars. Fingers crossed and did the function tests and all worked as designed! I would add photos but the videos look identical to my application.
by: Hans04/13/2022
Jeep
This system is time consuming to install but with the help of the etrailer videos the install went well. I really love the system. I have towed my Jeep with my RV a few times down some really steep grades and the system works awesome. The beauty of the system is when you are done towing, you disconnect the tow bars and safety cables, unplug the breakaway cable and brake/turn signal cable, switch off the control unit and your done! Preparing for the tow is just the reverse. I did consider many other types of systems and models, but I'm really happy with the Demco Stay-in-Play Duo. The Wireless Coachlink monitor is also awesome.`
Hans
4/17/2023
I have used the system several times over the last year and I am very pleased on how great it works. We have really tested the system on some steep grades with no problems.
by: Glampur07/28/2023
What a great auxiliary braking system. I was a little apprehensive about installing this system myself on my 1999 Jeep TJ SE, but I found hte instructions to be well written and once I read through them several times and then took my time to follow them step by step the overall installation was pretty straight forward. I wont lie the installation took about 8hrs for me to complete, with one call to their support line which was excellent by the way!I had a question on the diodes. They answered my question and offered great support. Once installed and calibrated, the braking system worked as expected, actually better than expected. I really like the remote monitor which allows me to see when the brakes are applied on the Jeep from within the cab of my RV. I highly recommend this system....
by: Kathleen08/11/2023
Braking system worked great on my Jeep. We towed the vehicle on a 6000 mile journey this year. We were up and more importantly, down the Rocky Mountains and the braking system never failed us. Would definitely recommend.
by: Greg05/31/2024
Easy to use fast and gets the job done, great product
by: Justin 10/10/2022
Etrailer videos made this a pretty simple install. So far so good.
Justin
10/12/2023
Everything is working how it should be.
Mike L.
11/4/2023
@Justin That's great to hear! We're glad your Demcon # DM86VR braking system is working well for you!
by: 04/08/2021
Works great. Self installed on 2018 Ford F150 without much difficulty. I recommend watching etrailer install video. Mine has wireless duo monitor. Extra care needs to be used when splicing into tiny brake light switch wire. If bad connection is made truck will not shift out of park.
by: Gary06/06/2022
Great braking system. Installation directions were good and clear, but there are a lot of steps. It is easy to adjust properly once installed and has worked flawlessly for 2500 miles towing my 2015 Subaru Forester.
25
593
Show More Reviews
See what our Experts say about this Demco Flat Tow Brake System
- Parts Needed For Flat Towing a 2022 Ford Bronco Outer Banks With LED Signature LightingThe Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 contains all the parts you need for wiring your LED tail lights on your 2022 Ford Bronco Outer Banks. If you are using a tow bar like the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676 you can use the wiring included in the RoadMaster Nighthawk All Terrain Towing Combo Kit # RM-9284-2. In the event you still need everything for flat towing your Bronco the Roadmaster Direct-Connect Base Plate Kit #...
view full answer... - Flat Tow Base Plates For 2022 Ford Bronco Wildtrak & Roadmaster Falcon 2 Tow BarWe do indeed have base plates that fit your 2022 Ford Bronco Wildtrak that will allow you to use the Roadmaster Falcon 2 Tow Bar # RM-520. The correct fit will depend on if you have the standard factory bumper or have the optional Ford Performance Heavy-Duty Modular front bumper: - Standard Front Bumper: Roadmaster Direct-Connect Base Plate Kit # RM79RR - Ford Performance Heavy-Duty Modular Front Bumper: Roadmaster Direct-Connect Base Plate Kit # RM92ZR These direct-connect base plates...
view full answer... - Do You Have to Cut Front Fascia of 2024 Ford Maverick to Install Demco Base Plates to Flat TowHey Carl, thanks for writing in, and that's a good question. Thankfully, the answer is no, you do not need to cut or trim the fascia/face plate on a 2024 Ford Maverick to install the Demco base plate that fits, which is the following part number: - Demco Tabless Base Plate Kit # DM77YV This base plate was designed for the arms to use the openings already on the front fascia which is why no fascia cutting is required. And that's great because nobody wants to do any extra cutting of their...
view full answer... - Items Needed to Flat Tow 2022 Ford MaverickThe Roadmaster Direct-Connect Base Plate Kit, # RM97RR is the Roadmaster part number of 524470-5. From conversation with our contact at Roadmaster, the (524470-5) will fit all models of the Ford Maverick with 2.5 hybrid motor, no interference with adaptive cruise control. There are 5 basic components needed to flat tow any vehicle, the Base Plate Kit, Tow-Bar, Safety Cable, Wiring Solution and Supplemental Braking. Some vehicle set-ups require additional parts to supplement the basic...
view full answer... - Recommended Parts to Flat Tow a 2021 Jeep Wrangler UnlimitedI would be more than happy to help you out! Here is what I recommend using for flat towing equipment on your 2021 Jeep Wrangler Unlimited Rubicon: etrailer Invisible Base Plate Kit - # e98948 etrailer SD Non-Binding Tow Bar - # e34ZR Flexo-Coil Wiring Kit - # RM-15267 Stop Light Switch Kit - # RM-751490 Brake System - Part # DM86VR for motorhome with hydraulic brakes or part # SM99243 for motorhome air brakes I really like our base plate kit and tow bar system because it looks clean once...
view full answer... - Parts Needed to Flat Tow 2022 Ford BroncoCurt Manufacturing shows the Custom Base Plate Kit, # C59JR to fit the 2021 Ford Bronco but they do not list it as a fit for the 2022 model year. In addition, this base plate option is limited to only being used with the Curt Rambler Steel Tow Bar for Curt and Blue Ox Base Plates, # C26FR. While this is a decent tow bar option, we have several options that are better and can be used with a wider selection of base plates. My recommendation for your 2022 Ford Bronco with Ford Performance...
view full answer... - 2021 Jeep Wrangler Sport recommended Blue Ox Parts for Flat Towing with Off-Road BumperThanks for all the details Jason! To get a Blue Ox tow bar to fit with the shackles on your 2021 Jeep Wrangler Sport you'll need either the 7/8" # BX88357 or 1" # BX88358 Adapters, but just be sure to check with the manufacturer of your off-road bumper because not all bumpers with shackles are rated for flat towing. With that being said, here are the parts I recommend for your application: - Tow Bar Adapters 7/8" # BX88357 or 1" # BX88358 - Blue Ox Avail Non-Binding Tow Bar # BX7420 ...
view full answer... - Comparing The Roadmaster Invisibrake And Demco Stay-IN-Play Duo Supplemental Braking Systems There are a few differences between the Demco Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor # DM86VR and the Roadmaster InvisiBrake Supplemental Braking System # RM-8700. The biggest difference between the two is related to the installation, because while the # DM86VR can be mounted in the engine bay to minimize the space taken up inside the cab the # RM-8700 will have to be placed in the cab and is quite large. This size and mounting requirement typically...
view full answer... - Recommended Flat Towing Components For A 2023 Ford Maverick 2.5 Hybrid Yes, the parts I recommended in the Q&A you're referencing would still be a great choice for your 2023 Ford Maverick. I've relisted those options below with one other side note on the braking system incase you have a diesel pusher motorhome. Tow Bar: etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates # e74ZR. Base Plate: The Roadmaster Direct-Connect Base Plate Kit # RM97RR (Note: These base plates are only compatible with models with a 2.5 Hybrid motor.) Tow...
view full answer... - Invisibrake vs Stay-IN-Play Duo for 2022 Ford MaverickYes, the Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor, # DM86VR is designed to fit any typical auto that is able to be flat towed. I definitely suggest you go with the version that has the Coachlink feature, # DM86VR.
view full answer... - Will Demco Stay-IN-Play DUO Not Work if Battery DiesCorrect, you do need a working battery for activation and continual operation of the Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251 and Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor # DM86VR. If you used the version with the Coachlink monitor you would know as you wouldn't get a signal that the brakes were applied. That said, a charge wire kit will allow you to avoid this completely with the Towed Vehicle Battery Charge Wire Kit for...
view full answer... - Does a 2022 Ford Ranger Need The Roadmaster Brake-Lite Relay Kit # RM-88400Yes, for the 2022 Ford Ranger you should install the Roadmaster Brake-Lite Relay Kit, # RM-88400 along with the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit, # RM-15267; the installation instructions are linked below. Having a Ford vehicle with a "neutral tow" kit, you will default to the "B" option Instruction Sheet. For a complete flat tow set-up, I recommend the following: - Base Plates, Roadmaster Direct-Connect Base Plate Kit, # RM-524459-5 - Tow Bar, Roadmaster Nighthawk...
view full answer... - Blue Ox Base Plates & Flat Tow Set Up For 2023 Ford Expedition 4WDWe can get your 2023 Ford Expedition 4WD a Blue Ox flat towing set up. To make it easy to order I'll go ahead and list out the correct parts for you: - Base Plate Kit: Blue Ox Base Plate Kit # BLU76CR - Tow Bar: Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380 - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 - Supplemental Braking System: Demco SBS Stay-IN-Play DUO Supplemental Braking System # DM86VR - Towed Vehicle Battery Charge Wire Kit for Demco Supplemental...
view full answer... - Parts Needed to Flat Tow a 2014 Honda CR-V Behind a MotorhomeI am assuming you mean you want to flat tow your 2014 Honda CR-V, as in pull it behind your motorhome. To do that you will need 5 main parts (and possibly some other parts that your specific vehicle requires). I have included these parts below with a brief description of what each one does as well as a recommendation. Base Plate Kit: This is a custom fit part to your CR-V and provides the attachment point for the tow bar coming from your motorhome. I recommend the etrailer Invisible Base...
view full answer...
- 2024 Ford Maverick Roadmaster Flat Towing Parts RecommendationsI really like the Roadmaster flat towing products (with the exception of their brake systems) so I'm glad you asked about them for your 2024 Ford Maverick! Here are the parts I recommend using for flat towing your vehicle: - Roadmaster Direct-Connect Base Plate Kit # RM97RR - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights # RM-676 - Wiring Kit # RO44FR for LED Lights OR # RM-154 for Non-LED Lights - Battery Charge Line Kit # RM-156-25 - Brake System # DM26VR for air OR #...
view full answer...
- Base Plates, Wiring Harness & Parts Needed to Flat Tow 2022 Ford ExpeditionWe can get your 2022 Ford Expedition set up to be flat towed with base plates and a wiring harness, and I'll go ahead and list out all the parts required, including a supplemental braking system in case you need those as well. I verified these fitments with the manufacturer for you, though please note the base plates don't fit the Timberline model of Expedition (there are no base plates for the Timberline model). - Base Plate Kit: Blue Ox Base Plate Kit # BO84FR - Wiring Kit: Roadmaster...
view full answer... - Parts Needed to Flat Tow a 2021 Ford BroncoWe can help you out with that! In order to flat tow your 2021 Ford Bronco behind your 2022 Newmar Class A motorhome you will need at least 5 main parts. Those parts are a base plate kit, tow bar, safety cables, tow bar wiring and a supplemental braking system. I have included each of those parts below, along with a brief description of their purpose. Base Plate Kit: This is a custom fit part that provides attachment points on your Bronco for the tow bar to use. - Roadmaster Direct-Connect...
view full answer... - Parts Needed to Flat Tow 2022 Chevy Blazer RSPer the owner's manual I searched for online, a 2022 Chevy Blazer RS can be flat towed. Here are all the parts you will need in order to make that happen: - Base Plate Kit: Blue Ox Base Plate Kit # BX1735 - Tow Bar: etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 - Roadmaster Stop Light Switch Kit # RM-751483 - Roadmaster Automatic Battery Disconnect with Switch # RM-766 - Supplemental Braking...
view full answer... - Parts Needed To Flat Tow a 2017 Jeep Wrangler Lifted With Aftermarket Bumper Having 3/4" Wide D-RingFirst you will want to verify with your aftermarket bumper manufacturer to ensure it is rated for flat towing use. As long as your bumper is rated for towing you can attach the 3/4" D-Ring Adapters # RM-035 to the Roadmaster Nighthawk Tow Bar # RM-676. These adapters will fit a 3/4" wide D-Ring with either a 7/8" or 1" diameter mounting pin. With your 2017 Jeep Wrangler being lifted you will likely need one of the High-Low adapters to keep the tow bars within 3" of level from your motorhome...
view full answer... - Can A 2021 Ford Bronco With Modular Bumper Be Flat Towed From By The D-RingsI believe you're referring to the modular bumper on the 2021 Ford Bronco. From what I can find the D-Rings are only meant for recovery purposes and aren't currently listed as being rated to tow from. This could be outdated information though so I recommend reaching out to your local Ford dealer just to be sure that the specific model you have is capable of being towed from the D-Rings. If not, then the correct baseplate for the modular bumper is the Blue Ox Base Plate Kit # BLU23XR, which...
view full answer... - Recommended Flat Towing Parts for a 2023 Ford Maverick Yes, it is. The etrailer SD Non-Binding Tow Bar item # e74ZR is compatible with the Roadmaster Direct-Connect Base Plate Kit item # RM97RR. This base plate kit is custom fit and will work great with your 2023 Maverick. The best permanently installed braking system and what I highly recommend is the Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor item # DM86VR for hydraulic brakes. If your motorhome has air brakes you will need the Demco Air Force One Supplemental...
view full answer... - Parts Needed To Flat Tow a 2020 GMC 2500HD Behind a Class A RV MotorhomeFirst you will need the Roadmaster Direct-Connect Base Plate Kit # RM86FR for the front of your 2020 GMC Sierra 2500HD. This will allow you to connect your Sierra to your class A coach using the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar # RM-422. You may need a High-Low adapter like the 4" # RM-048-4 to keep the tow bars within 3" of level from vehicle to vehicle. The base plate has a height of 20-1/4" when installed on a truck with 275/65R20. The RoadMaster BlackHawk 2...
view full answer... - Parts Needed to Flat Tow a 2021 Ford RangerYou will need to start with base plates, I recommend the Blue Ox Base Plate Kit, # BLU77XR. This option fits all trim packages of the 2021 Ford Ranger and mates to the Blue Ox Avail Non-Binding Tow Bar, # BX7420 that you are interested in. It also comes with the needed safety cables. You will also need a lighting solution to tie your Ford Ranger's indicator lights to those of your 2021 Odyssey Motor Home when towing. For this I suggest the Roadmaster 4-Diode Universal Wiring Kit, #...
view full answer... - Parts Needed To Flat Tow a 2023 Ford Escape Hybrid and Choosing Where To Have Everything InstalledWe have a link to find installers in your area on our product pages. On the Roadmaster Direct-Connect Base Plate Kit # RM77GR page you can find the link "Locate installers near me" just below the product images which will allow you to see the installers in your are by entering your zip code. I do recommend checking their reviews and contacting to discuss the parts you are looking to install as every installer is different and can have different rates. Here is a list of the other parts I...
view full answer...
Do you have a question about this Flat Tow Brake System?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Andrew K
Video by:
Jonathan Y
Video by:
Thomas T
Video by:
Ethan H
Video by:
Samuel H
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
John S
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
Written by:
Kristina F
Updated by:
Mike S
Updated by:
Noah M
Updated by:
Eric H
Updated by:
Emily H
Updated by:
Amanda K
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Deborah
4/21/2024
The braking system is awesome. Just flip the toggle switch to tow, and back for regular driving. Easy!