Brake Buddy Select 3 Portable Flat Tow Brake System - Proportional
Item # HM39524
Retail:$1,791.00
Our Price: $1,504.42
You Save: $286.58
Confirmed to Fit
1999 Jeep TJ
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (275)
- Q & A (0)
- Photos
1999 Jeep TJ - Brake Buddy Select 3 Portable Flat Tow Brake System - Proportional
- Proportional System
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Brake Systems
- Portable System
- Brake Buddy
This portable unit gets you smooth braking without a complex installation. Senses the RV braking and applies the brakes proportionally. Easy to swap between multiple towed cars: settings adjust for safe, even braking for any size car.
Features:
- Applies towed vehicle's brakes proportionally for comfortable braking
- Measures motorhome's braking and activates car's brakes with same intensity
- Prevents false braking with terrain-sensing technology
- Lets you adjust force and sensitivity for smooth braking
- Swaps easily between multiple towed vehicles
- Requires a second vehicle kit (BB59SR - sold separately) for each alternate car
- Adjusts easily to fit in almost any vehicle
- Sits level for optimal performance thanks to adjustable feet
- Clamps easily around almost any brake pedal
- Allows you to control and monitor braking with handy wireless remote
- Plug into 12V accessory outlet or use with AA batteries
- Easily check readouts for potential problems
- Change braking modes and settings from the cab of your RV
- Gets ready to tow with 1-touch auto start
- Removes excess vacuum pressure from your car's brakes
- Checks braking system for errors
- Keeps car's battery fully charged with 15-amp battery charge line kit
Specs:
- Compatible with hybrids and other cars with electric power-assist brakes
- Dimensions: 19" long x 11-3/4" wide x 6-3/4" tall
- Power draw at 12V: 15 amps
- Range of adjustable feet: 1" - 4" tall
- Power harness length: 36"
- Weight: 12 lbs
- 5-Year limited warranty
Do I Need a Braking System for Flat Towing?
A braking system is a must when towing a vehicle behind your motorhome. Without it, the weight of the towed car can create a safety hazard, strain your RV's brakes, and affect the warranty of both your car and motorhome. Most states legally require a supplemental braking system, so if you don't use one and you end up in an accident (which is more likely since your RV takes longer to come to a full stop), your insurance and liability headache just doubled. You also won't have any breakaway system; if there's an accidental disconnect, there's nothing to bring your car to a stop.
Pros of a Portable System
First, this system is great for DIYers, since you can get the basic installation done yourself. There will be some minor wiring to do under the hood and in the cab, but that's as complicated as it gets.
Second, it offers you a lot of flexibility. It's easy to move from one toad (towed vehicle) to another - or, if you think you'll likely get a new car down the road, you can easily set the Select 3 up in your new toad.
How Does the Brake Buddy Work?
The Brake Buddy Select 3 uses a built-in inertia sensor to detect when your flat tow setup begins to slow down as you apply the brakes in your motorhome. The moment the system recognizes the change in momentum, the actuator will press down the brake pedal of your toad proportionally: at the same time, with the same intensity. Meanwhile, the terrain-sensing technology keeps the unit from activating when you go over bumps in the road, so it doesn't brake when it doesn't need to.
Compatible with Hybrids and Continuous-Power-Assist Brakes
If you're towing a hybrid or any car with continuous-power-assist brakes, all you have to do to be able to use the Brake Buddy is change the Braking Mode to Hybrid.
Setting Up the Brake Buddy Select 3
You'll be setting up this portable unit in your toad every time you flat tow, so it's designed to be easy to do. And because it's so adjustable, it fits in almost any vehicle on the market.
Step 1: Position the Brake Buddy
Shift the driver's seat back and set the Select 3 on the floorboard. It's important that the unit sits as level as possible so the actuator has enough leverage to effectively push down the brake pedal, so adjust the feet of the unit to suit your floorboard if need be.
Each foot can be adjusted easily by hand or with the included wrench. Twist it counterclockwise, pull it down to the right length, and then twist clockwise to lock it in place.
Quick Tip: It's best to remove your vehicle's floor mat before installation to keep the Brake Buddy from shifting.
Step 2: Attach the brake pedal clamp
Next you need to get the clamp attached to the brake pedal with the Quick-Lock clevis. This adjustable clevis is designed to securely clamp onto the pedal regardless of its size or shape. Once you have the clevis fixed around the pedal, turn the lever to tighten it in place.
Step 3: Plug in and power up
Plug your Brake Buddy into the connector you'll have installed under the dashboard and then press the Auto Start button. The system will automatically boot up to your saved settings and then check your brakes, pushing and releasing the brake pedal several times to remove built-up vacuum pressure from the brakes and prevent over-braking. It will also check for any connection errors. Then you're ready to flat tow!
Braking Power Settings
The braking power settings control how intensely the Brake Buddy Select 3 applies your toad's brakes. When you are first setting up the Brake Buddy, choose the setting that's recommended for a vehicle of your toad's size:
| Vehicle Type | Recommended Braking Power |
|---|---|
| Hybrids | 10 - 20 psi |
| Cars and Compact SUVs | 25 - 45 psi |
| Small Crossovers | 25 - 45 psi |
| Crossovers and Small SUVs | 35 - 65 psi |
| Mid-Size Pickups | 35 - 65 psi |
| Large SUVs and Pickups | 45 - 75 psi |
After selecting an initial setting, press the plus or minus buttons on the control panel to fine-tune the power. The setting should be enough that your toad gives a slight tug at your RV when you brake. On the right setting, you won't be at risk of damage from over-braking. Once you've set the braking power, it shouldn't need to be changed unless you tow a different vehicle.
You can also customize the sensitivity. This determines how aggressively you need to brake in the motorhome for the Brake Buddy to activate your toad's brakes. If you set the sensitivity high, then your car's brakes will activate with just a light tap of your RV's brakes. Low sensitivity will mean the system only activates when your motorhome brakes significantly.
Full Braking
You can also select the full-braking mode. When in this mode, the Brake Buddy will activate your toad's brakes at the maximum preset intensity, regardless of how intensely your RV is decelerating. The full-braking setting is ideal for when you're towing a heavy truck or SUV, or if you're towing your car down a steep incline. By setting the power to a higher level, you can ensure that the momentum of your toad won't cause it to push against your motorhome.
Easy Remote Operation
It's important to monitor your toad's braking to make sure that everything's working the way it should. With the included remote, you can also control the Brake Buddy from the cab of your RV! It's just like having a brake controller in your motorhome.
With the remote, you can easily switch from proportional braking to full braking and vice versa with the push of a button. You can also change the Brake Buddy's sensitivity settings, which makes it easy to fine-tune the braking as you drive so that you can adjust based on feel. Finally, the remote will illuminate to alert you of any errors with the Brake Buddy system, including a breakaway event.
Breakaway System
The Brake Buddy also comes with a breakaway switch, an absolute must for safe flat towing. If there's ever an emergency situation where your toad becomes detached from the motorhome, the breakaway switch will immediately activate the brakes and bring your vehicle to a stop.
This switch mounts to the front of your toad and plugs directly into the unit. It includes a pin that connects to your RV's hitch receiver with a breakaway cable. If the toad and RV become disconnected, the cable will pull the pin out of the switch and trigger the braking system. A reserve air supply in the operating unit will then apply the brakes in the car.
39524 BrakeBuddy Select Three Portable Supplemental Braking System by Hopkins
Installation Details
California residents: click here
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Defective
- Product did not meet expectations
- Wrong item was ordered
Customer Reviews
Brake Buddy Select 3 Portable Flat Tow Brake System - Proportional - HM39524
Average Customer Rating: 4.5 out of 5 stars (275 Customer Reviews)
This portable unit gets you smooth braking without a complex installation. Senses the RV braking and applies the brakes proportionally. Easy to swap between multiple towed cars: settings adjust for safe, even braking for any size car.by: Jonathon 05/22/2024
2003 Jeep Wrangler
It took me awhile to figure out how to set it up in my "Tiny Jeep" (TJ). I finally tried flipping the bracket for the brake pedal upside down, and that moved the connecting bracket forward just enough to where the shaft fit in the bracket. Used it once, about a month ago, and couldn't even tell the Jeep was connected to the motorhome. The tow vehicle is a 2023 Tiffin Wayfarer. The tow is a 2003 Jeep Wrangler TJ.
by: David E04/05/2023
Had a problem with the connection to the unit but called etrailer and they sent me a new one after sending the other back to them. The hole process very painless and the the staff at etrailer was great to work with. Thank you etrailer for your great response.
by: George02/08/2024
2024 Jeep Wagoneer L
I am still scratching my head on the placement of the Main Unit. The floorboard area of the 2024 Jeep Wrangler is very small. The 2 levels of the rear of the unit are such that I can't seem to get the right height to stabilize the unit. The seat can be brought slightly forward but does not contact or even come close to the Handle when raised. With the plunger all the way in, there is hardly one half (1/4") inch of clearance before beginning to press the brake pedal. I can't find anyone else that has installed this unit. HELP please.
Katrina D.
3/7/2024
Well scratch your head no more, George! Help is on the way! I have gotten in contact with Hopkins (Brake Buddy) and they have confirmed that when it comes to installing this Select 3 Portable Braking system on a Jeep Wrangler, you may need a Brake Buddy Clevis to help fill in that gap. This Clevis is Jeep specific and is generally provided by Brake Buddy themselves. I have gotten one ordered for you and you should receive it soon. Please get in touch with me when you receive it and let me know if you are needing any further assistance.
by: Kevin04/08/2024
2018 Jeep Wrangler
I LIKE THE BRAKE BUDDY SYSTEM FOR MY 2018 JEEP WRANGLER BUT THE DESIGN OF THE CONNECTION TO THE BRAKE PEDAL IS SOMEWHAT HARD TO GET CONNECTED. THE "CLAWS" SEEM TO WANT TO MOVE THE RUBBER COVER OFF THE PEDAL. THE ANGLE ALSO SEEMS TO ALWAYS WANT TO MOVE THE BRAKE BUDDY TOWARD THE DRIVER DOOR.
by: Don 02/01/2023
Once I got the right brake mount clamp and had the power cord from car to controller replaced, the unit has worked great, thank you.
Don
2/3/2024
Still great.
by: Vince 02/25/2024
2020 Dodge Charger
First off, the great folks at etrailer had the kit pulled, labeled and ready for the shipper to pick it up literally within a few hours after I ordered it. Impressive to say the least. The Brake Buddy is packaged in an organized and protective layout with minimal assembly required.
Installation was pretty straightforward. If you can understand a pictogram of wiring, it’s a no-brainer for the charger and cab receptacle. Tow vehicle I installed it in is a 2020 Jeep JL. There’s a round firewall plug under the brake booster that makes for a great spot to run your wires through the firewall which makes installation a breeze.
The brake pedal clamp in the JL appears more functional if installed inverted. That gets the clevis reachable up top while keeping the actuator arm closest to level. The seat needs to be all the way back as wrestling the Brake Buddy into the floorboard is tight. There’s no room on the floorboards for vacuuming, even less for a portable brake module. The front leveler legs need to be fully extended, the one closest to the door on the rear, 90% extended and the rear interior one will only need an inch out.
Once installed and powered up, the compressor runs to charge the actuator control. Press the auto start and it pumps the brake pedal to eliminate any residual vacuum boost. I set the operating pressure to 45, sensitivity to mid and mode to proportional. I’ll fine tune it once we get out on the road. At this juncture, everything was in the kit, everything appears to work and etrailer filled the order with urgency and care!
by: Henry 03/27/2024
It worked like it should. I did have to bend the connector on my brake buddy harness to make it stop shutting off when I 1st got it. It has been fine ever since.
by: James12/30/2021
Jeep Wrangler
I looked at several supplemental braking units and wanted one that was portable with nice features like wireless monitoring and parameter changes while flat towing my Jeep Wrangler. I reviewed the videos on the etrailer site for features and installation instructions, they’re well done and really helped with my buy decision and installation guidance. I decided on the Select 3 mainly because of the option for full or proportional braking, as I live in CA and take my RV through mountain passes often. The installation was straight forward with the help of the etrailer videos, very well done. The initial testing of the unit was a bit tricky, but it worked, after leveling the unit out. The first trip with the unit was from Southern CA to Paso Robles through the “Grapevine” pass and some other large hills, the unit worked well and gave me the extra braking I needed while flat towing my jeep behind my RV. During this trip, the unit was inconsistent in bleeding the brakes upon startup. I shared this information with etrailer in detail, and they sent me a replacement unit after trouble shooting. I want to thank etrailer for excellent support of a product which I entrust the safety of my family to while in use. The new unit has been wonderful on two other trips so far. I’m very happy with the performance and ease of use for the Select 3. It just takes a few minutes to position in the jeep, activate and get going down the road after the initial install was complete, which only took a few hours to run simple wiring. The unit is not very large or heavy, and easily fits in a normal storage compartment of the RV when we arrive at our destination. I look forward to many more trips with my family in our RV and the Select 3 giving us the supplement braking we need in our jeep on any road type.
by: Brenda10/24/2023
Don't really like this system and decided to just tow without a braking system at all and all is good by doing so. This unit is awkward, expensive and a pain to use
Katrina D.
10/28/2023
I would definitely look into your states laws on pulling a trailer with or without a braking system. For instance, in Missouri, by law a supplemental braking system is not required except on trailers coupled by a 5th-wheel and kingpin. While in Idaho the law states "Trailers with an unloaded weight of 1,500 lbs. must have an independent braking system, and a breakaway system." Please double check your states laws before proceeding without a braking system.
by: Abraham11/15/2023
The proportional breaking never worked right and on our last trip the system kept cutting out until it quit working all together. I was in the southern US and had to drive back to Canada without the aid of the breaking system. i tried to check it out and fix it but was unable to get continuous power to the brake buddy.
by: Joe04/17/2020
Hi Miranda, here are the pictures of the bracket and Brake Buddy installed in my Jeep. Works very well. I tried to move the seat forward a bit but when the Brake Buddy activated it pushed the seat adjuster and moved the seat all the way back. Thank you for the bracket.
by: Charles05/10/2023
Well got it installed. Not to bad. Appears to work . Planning a trip in 2 weeks. Will post update
Charles
5/11/2024
Works Great, easy install, recommended
by: Jim03/13/2024
I ordered the brake buddy yesterday and paid for overnight shipment. The confirmation indicated I would receive it today by 8pm. To my surprise I woke up and discovered it on my front porch this morning. Amazing service
by: Howard12/27/2023
have trouble with the brake paddle attachment locking onto the brake. setting the brake buddy adjustment take a while to adjust.
by: Michael09/25/2023
2020 Jeep Wrangler
Plug keeps getting loose on unit. I drilled a hole in the case and installed a tie wrap attaching wire to case no more movement of plug works great otherwise
by: Jim01/29/2024
2005 Jeep Wrangler
The parts worked well with my application. 2005 Jeep Wrangler Rubicon (TJ)
by: Jeffrey04/06/2024
2016 Ford Transit T350
On our first trip, still 2000 miles plus from going back home, and a short is developed in the cord end plugging into the unit. The video won’t upload; but as it’s bleeding the brakes the motion causes the unit to short out and turn off. Hardly safe.
Jenny N.
4/10/2024
Yikes! I reached out to Hopkins directly and they have a suggestion about it. Sometimes with this unit the male prong on the 4 flat connector that plugs into the unit will get bent inwards. When looking down on the prong you can see that it is split into 4 pieces. If the four pieces get bent together inwards then it will not make a good connection with the metal ground when plugged in. You can take a flat head screw driver and spread the pieces apart to fix it. Let me know if that works for you.
by: Glen11/04/2023
Overall good performance so far with the Brake Buddy. The only issue that we had was the cable connected to the unit would come loose during operation and send a “check Brake Buddy” error on our remote. We were able to easily remedy this by using a screwdriver to spread out the connection terminal to make it tighter as per customer service instructions.
Customer service is great & very helpful!
by: Joseph 11/09/2023
Jeep Liberty
I have had the brake buddy system 3 for a year and it's a great braking system, I have no problems and its works great with my jeep liberty.
by: Paul 09/18/2023
2020 Jeep Wrangler
If you’re installing in a 2 door Jeep this brake buddy will install much easier if you 1. Remove floor mat 2. Set the driver seat all the way back towards the rear and 3. Lower the driver seat all the way down. By doing this the brake buddy will fit properly and allow for installing the cotter pin into the cleaver.
by: Robert08/24/2023
Nice unit, does what it is supposed to do and will noticeably slow my towed vehicle. It is a little cumbersome, but I set everything up in 8 or so minutes. Downside is that after one month long trip it would lose power after hitting a bump. Customer service was great and I eventually sent it back for repairs. They replaced a few things and has worked well until very recently. It appears that the plug will lose contact for a second over a bump and then the unit goes into a standby mode. The remote will let me know and I have to pull over and rebleed the unit. Some dielectric grease seems to have solved the problem
by: Edward12/04/2023
2012 Chevrolet Volt
Looking good so far. The only comment I can think of is a question as to why the wiring is different then standard 12 volt wiring. For example, ground in normal 12 volt is the black wire. Hot is the red. etc. The brake buddy doesn't follow that standard.
by: Traveler05/05/2024
Wiring is very sensitive, have to secure wiring in vehicle with zip ties so it doesn't come undone. Other than that it stops when it needs to
by: Trevor06/07/2022
2014 Jeep Wrangler
This was super easy to install in my Jeep. The install video for the Wrangler was spot an very helpful. I installed a permanent brake system in another car before doing this one and I am so pleased with the install.
Now I am off to test it out.
Trevor B.
6/8/2023
Ive been using this for a year now and have set it up a couple dozen times or more. This was so much easier than an installed brakes system. The only issue that weve had with it has to do with the power cable that connects to the 4 pin connector inside the vehicle. After some time the connector gets loose enough to fall out which requires is to pull over and reset the system. From Brake Buddy the fix is to look at the pins on the cable and where the tips of the pins almost look like you could a screwdriver, use a pocket knife or something thin enough to fit into the slots and gently spread them apart. I definitely recommend this device for a good, simple brake system.
Mike L.
7/6/2023
@TrevorB They gave you great advice, that's exactly what we recommend to folks that have the same problem with their # HM39524 Hopkins Brake Buddy.
Helpful Links
by: Matthew10/22/2023
Easy to get the car ready for towing. Just a few minutes. The permanent wiring with a battery tender makes towing worry free.
25
275
Show More Reviews
See what our Experts say about this Brake Buddy Tow Bar Braking Systems
- Complete Flat Tow Setup And Tow Bar Compatibility For A 2006 Chevrolet TrailblazerTow bars like the etrailer XHD Non-Binding Tow Bar for Roadmaster Crossbar Base Plates # e64ZR are not vehicle specific, but rather base plate specific. So, to be able to use this tow bar with your 2006 Chevrolet Trailblazer you're going to need to use a XL, EZ, EZ2, and EZ4 Series base plate. I recommend checking out the: -Roadmaster Crossbar-Style Base Plate Kit # 3109-1. This base plate is confirmed to fit your 2006 Chevrolet Trailblazer, and will allow you to use the etrailer XHD...
view full answer... - Will The Demco Classic Base Plate Kit Fit A Demco Exaclibar Tow Bar On A 2005 Honda Pilot?Yes, the Demco Classic Base Plate Kit # DM9517143 that you mention is compatible with all Demco tow bars to include your Decmo Excalibar. Additionally, if you're interested in a complete flat towing setup for your 2005 Honda Pilot, you're also going to need: -A braking system, like the Brake Buddy Select 3 Portable Supplemental Braking System # HM39524, -A set of tow bar wiring, like the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-98146-7, & -A set of safety...
view full answer... - How To Use etrailer Tow Bar on a 2020 Jeep WranglerIn order to use the etrailer XHD Non-Binding Tow Bar part # e94ZR on a 2020 Jeep Wrangler you'll need to use the etrailer Invisible Base Plate Kit part # e98948. In addition to this you'll also need some other items which I have listed for you below. Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524 If the tow bar is not within 3" of level then you'll also need a high-low adapter like the Blue...
view full answer... - Parts Needed To Flat-Tow a 2022 Jeep Grand Cherokee WK All Trim PackagesIn order to flat-tow a 2022 Jeep Grand Cherokee WK (All Trim Packages) you'll need a base plate kit, safety cables, tow bar, lighting, and braking system. I have attached a list with each of these parts listed below. Roadmaster Direct-Connect Base Plate Kit part # RM-521440-5 Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar part # RM-676 Roadmaster Wiring Kit with Smart Diodes part # RM47ZR Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524
view full answer... - Comparing Demco Tabless and etrailer Invisible Base Plates for a 2018 Jeep Grand CherokeeThere are no differences between the Demco Tabless Base Plate Kit part # DM9519291 and etrailer Invisible Base Plate Kit part # e98950, this is just who we use for our braded base plates. I recommend whichever is more cost effective at the time. They are both directly compatible with most Blue Ox, etrailer, Demco, and Curt tow bars. In order to complete your setup you'll still need a few other items which I have attached for you below. Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring...
view full answer... - How to Locate Installer for Blue Ox Base Plate on 2012 Honda CR-VIn order to find locations for the installation of the Blue Ox Base Plate Kit - Removable Arms # BX2258 on your 2012 Honda CR-V you can either follow the link at the bottom of this page, or use the "Locate installers near me" link on the actual product page. In addition to the base plate kit you will need the following to flat tow your vehicle: -Blue Ox Alpha 2 Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,500 lbs # BX7380 -Roadmaster Tail Light Wiring Kit with Bulbs # RM-155 -Roadmaster...
view full answer... - Recommended Flat Towing Equipment For A 2004 Nissan Xterra 4x4According to the online manual for a 2004 Nissan Xterra an automatic transmission will require a tow dolly to haul but a manual transmission can be flat towed if you follow the specific guidelines it states. To flat tow your vehicle you'll need a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the following recommendations listed for you below: Tow Bar: Based on what you've said you most likely have the Roadmaster Falcon 2 Tow Bar - Motorhome Mount -...
view full answer... - Compatible Flat Towing Equipment For A 1999 Jeep Wrangler Yes, the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521424-5 will be compatible with both your 1999 Jeep Wrangler and your Roadmaster tow bar. To flat tow your 1999 Jeep Wrangler you'll also need a tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you below: Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This diode kit allows you to use your Jeep Wrangler's tail lights and wiring...
view full answer... - Components Needed To Flat Tow A 2014 Honda CR-V FWDI checked the owner's manual for your 2014 Honda CR-V and your vehicle can be flat towed even though it is FWD. To get you started you'll need 5 items: 1. Base plate kit, a base plate kit is used to to connect the tow bar to the vehicle you're about to tow. I recommend the Roadmaster Crossbar-Style Base Plate Kit # RM-521567-4 which has removeable arms for ease of installation and removal. 2. Next, you will need a good set of tow bars, the Roadmaster Sterling All Terrain # RM-576 is...
view full answer... - Recommended Flat Towing Equipment For A 2002 Honda CR-VTo connect your 2002 Honda CR-V to your Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522 I recommend the Roadmaster Direct-Connect Base Plate Kit # 1541-5. You'll be able to remove the crossbar from the tow bar and use the direct-connect arms of the base plate to make connecting and disconnecting super simple. To flat tow your 2002 Honda CR-V you will also need a tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you below: Tow...
view full answer... - Flat Towing Recommendations For A 2021 Chevy Colorado Z71The Demco Tabless Base Plate Kit - Removable Arms Item # DM9519319 will fit your 2021 Chevy Colorado as long as it doesn't have adaptive cruise control. If you do have adaptive cruise control I recommend the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms Item # RM57VR. The Demco Commander II Non-Binding Tow Bar # DM9511012 you linked to will work with the # DM9519319. You will also need tow bar wiring and a braking system. I have the following recommendations for your below: Tow...
view full answer... - Recommended Flat Towing Equipment For A 2014 GMC AcadiaFor your 2014 GMC Acadia I recommend the Blue Ox Base Plate Kit - Removable Arms Item # BX1708. The hidden reinforcements, along with the removable bracket arms, provide a clean, unobtrusive look when your car is not being towed. The other equipment you will need for flat towing your vehicle is a tow bar, tow bar wiring, a braking system, and some safety cables. I have the following recommendations for you below: Tow Bar: Demco Commander II Non-Binding Tow Bar for Blue Ox Base Plates...
view full answer... - etrailer SD Non-Binding Tow Bar Compatibility With A 2014 Honda CR-VThe etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates # e44ZR you referenced can be compatible with your 2014 Honda CR-V, you'll just need to use compatible base plates. This tow bar was designed specifically to be compatible with crossbar-style Roadmaster base plates, so you would need the Roadmaster Crossbar-Style Base Plate Kit # RM-521567-4. This tow bar features telescoping arms and non-binding latches to make connecting/disconnecting on any terrain a breeze....
view full answer... - What Parts do I Need to Flat-Tow My 2014 Jeep Wrangler Unlimited?We definitely have what you are looking for! When it comes to flat-towing your 2014 Jeep Wrangler Unlimited Sahara, you need to have need a base plate, a tow bar, safety cables, a tow braking system, and vehicle tow wiring. Since there are so many different types of front bumper options for 2014 Jeep Wranglers, I cannot determine what base plate you need. This is because different base plates are compatible with different bumpers. Also, with that being said, I cannot determine what tow...
view full answer... - Complete Flat Towing Setup For A 1997 Ford F-150 4X4For your 1997 Ford F-150 4x4, you can use the Blue Ox Base Plate Kit # BX2146. This base plate kit will only work if you have tow hooks in the front for the bracket. If you're interested in a complete flat towing setup, you're also going to need: -A tow bar # BX4370. -Tow bar wiring # RM-15267. -A braking system # HM39524. & A high low adapter like # BX88130, however you'll need to measure for the rise and drop you need for your vehicle to be certain. I have included an FAQ on how...
view full answer... - Recommended Flat Towing Equipment For A 1994 Geo TrackerThe Roadmaster Crossbar-Style Base Plate Kit - Fixed Arms Item # 118-1 is a confirmed fitting base plate for your 1994 Geo Tracker and to attach it to your Reese tow bar you'll need the Roadmaster Tow Bar Adapter # RM-025. To flat tow you'll also need a braking system, tow bar wiring, and safety cables. I have the following recommendations for you below: Braking System: Brake Buddy Select 3 Portable Supplemental Braking System - Proportional Item # HM39524. This system provides intense,...
view full answer... - Full Flat Towing Set-Up for A 2004 Jeep Wrangler TJAlong with the Blue Ox Avail Non-Binding Tow Bar # BX7420, you're also going to need: -A Base plate kit # BX1120. -Tow bar wiring # RM-152-98146-7. -A Brake Light Relay # RM-88400. -A braking system # HM39524. & A high-low adapter like # RM-048-4. You'll want to measure for the high-low adapter by referencing the article I have attached to ensure you chose the correct adapter.
view full answer... - Recommended Flat Towing Equipment For A 2018 Jeep Wrangler JLThe Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights # RM-676 is a great choice for flat towing your 2018 Jeep JL Wrangler. It has a non-binding design which makes disconnecting a breeze on any terrain and a large hookup radius to make connecting to your base plates easy on any terrain as well. It has LED lights to help you hook up or disconnect in the dark and comes with a 6-way to 7-way cable and safety cables so you won't have to purchase them separately. To flat...
view full answer... - Falcon 5250 Tow Bar Compatibility With Roadmaster Base Plate On A 2006 Honda Pilot The Roadmaster Crossbar-Style Base Plate Kit - Removable Arms Item # 1550-1 is compatible with the 2006 Honda Pilot models with no brush guard. It is also compatible with the Flacon 5250 tow bar but the curb weight of the 2006 Honda Pilot is 4,200-4,500lbs so you'll need to make sure that you don't exceed the 5,000lbs weight capacity of the tow bar. You'll also need safety cables in the event of a breakaway, I recommend the RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000lbs # RM-643. For...
view full answer... - Recommended Flat Towing Parts for a 2012 Ford EdgeTo flat tow your 2012 Ford Edge Limited you will need the following parts: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643 Replacement Quick Disconnect Crossbar Assembly for Roadmaster Motorhome Mounted Tow Bars item # 910021-00 Base Plate Kit - Without Adaptive Cruise Control - Roadmaster Crossbar-Style Base Plate Kit item # 4408-1 - with Adaptive Cruise Control - Roadmaster EZ Base Plate Kit item # 524426-1 Wiring Harness...
view full answer... - Best Trailer Hitch for a 2018 Jeep Grand CherokeeYes, we do have a hitch for your 2018 Jeep Grand Cherokee. It is the Draw-Tite Max-Frame Trailer Hitch Receiver item # DT38MR. This hitch is custom fit and bolts to your Cherokee with included hardware. If you need a wiring harness to control your trailer or accessories lighting functions you will want the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118727. To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534....
view full answer... - Differences Between The Brake Buddy Select 3 And Brake Buddy Classic 3 Portable Braking Systems Both are great options for your 2022 Dodge Durango but there are a few key differences between the Brake Buddy Select 3 # HM39524 and Classic 3 # HM39494. The biggest difference between the two is that the Select 3 has two braking modes; proportional braking and full braking. Proportional braking will activate the brake pedal in the tow vehicle in proportion to how you press on the brake pedal in the motorhome. The full braking mode has seven sensitivity levels to customize your braking...
view full answer... - Recommended Flat Towing Set Up for a 1999 Chevy TahoeThanks for the picture! Yes, the Roadmaster XL Crossbar Style Base Plate Kit item # 199-1 will work with your Roadmaster bracket. I didn't see it in the picture but you will need the Roadmaster Tow Bar Quick Disconnect Brackets item # RM-222 to connect the two. I have listed some other parts you will need to flat tow your Tahoe below along with any installation videos we may have. Safety Chains - Roadmaster item # RM-643 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil...
view full answer...
- How To Set Transfer Case Of 2022 Chevrolet Colorado In Neutral To Flat Tow and Parts NeededFor a 2022 Chevrolet Colorado you only flat tow four-wheel-drive vehicles that have an N (Neutral) and a Four-Wheel Drive Low (4 (n) setting. Look for knob on the dashboard. This will most likely be the last position on the right of the knob and be an "N" that will illuminate when placed in neutral. First apply the parking brake and start the engine. Then shift the transfer case to N (Neutral). Verify that the vehicle is in N (Neutral) by shifting the transmission to R (Reverse) and...
view full answer...
Do you have a question about this Tow Bar Braking System?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Updated by:
Leah S
Updated by:
Mike S
Updated by:
Isabelle B
Updated by:
Noah M
Updated by:
Amanda K
Written by:
Alexander C
Test Fit:
Shane H
Test Fit:
Conner L
Test Fit:
Ryan G
Test Fit:
Bradley B
Test Fit:
John A
Video by:
Jacob H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
David E.
4/5/2024
Works well great addiction to towing car