Custom Fit Roof Rack Kit With Y00224 | Y00426 | Y53TR
(146 reviews)
Price: $688.80
In Stock
Custom Fit Roof Rack Kit With Y00224 | Y00426 | Y53TR
Item # Y67KB
Our Price: $688.80
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (146)
- Q & A (0)
- Videos (58)
- Photos
Yakima Roof Rack - Y67KB
- Crossbars
- Aero Bars
- 2 Bars
- 60 Inch Bar Space
- Yakima
- Black
- Overhang
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima 60" JetStream MD - Black:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit (sold separately) to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers (sold separately)
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima Landing Pad 4 (Set of 2):
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with factory track racks
- Attach to factory tracks with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Yakima SkyLine Towers (4-pack) (w/new covers):
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads (sold separately) to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter (Y03536 - sold separately)
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000224 Landing Pad 4 for Yakima Control Towers
8000426 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Black
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Custom Fit Roof Rack Kit With Y00224 | Y00426 | Y53TR
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima JetStream Crossbars Installation - 2022 GMC Sierra 1500
How's it going, everyone It's Ethan here with etrailer. Today we're going to be taking a look at the Yakima Roof Rack System with our JetStream crossbars and showing you how to install them on our 2022 GMC Sierra. If you're transporting a large amount of items or just large items in general and you don't have room in your bed, or they're just items you'd rather keep out of the cabin of your vehicle, a roof rack system like this is gonna be a good way to do that. The crossbars that we have here are an aerodynamic shape so they taper in the back just to cut down on some of that wind noise and wind resistance. With any sort of roof rack system, you'll get a little bit, but this is nice that it cuts some of that down. Additionally, it does feature this rubberized strip inside this T-track slot, so you can use these roof rack with T-track accessories and there's no need to trim the actual strip to get those on.
As far as the length of our crossbars go, there are a couple of different options as far as length. These are 60", which we found gives us enough room on top and enough overhang. The overhang that we have, we're measuring at 5", which gives you a little bit more room for accessories without being overbearing or sticking over your vehicle too much. With a weight capacity of 165 pounds, these crossbars will do a fine job of storing most of the bigger items that you might need, but something to keep in mind when you are storing those items is are they going to make contact with the top of your roof So we'll just measure from the roof to the bottom of our crossbars. It's about 3 1/2", so if your accessories do have clamps or things that hang onto the crossbars, you wanna keep that measurement in mind.
Additionally, to see how much height we're adding to the top of our vehicle is about 4 1/4", so if you live with these crossfires on your vehicle, that's how much you're gonna be adding to it. Additionally, if you have taller bindings on your skis or things like that, that's a good measurement to keep in mind to see if those will make contact with your vehicle as well. To start the install process, we like to just lay everything out, making sure that we know what everything is and that we have it. So we're going to obviously have our crossbar here, two towers, the covers for the towers, two hooks that'll keep the actual feet in place, two pads for the bottom, and our end caps. Additionally, there is a provided tool and we recommend going ahead and grabbing a fabric tape measure.
They do provide one, but we have our own. We'll start by assembling our towers. First thing, we probably want to loosen this metal plate here. We do that first actually by releasing this security lever. As you can see, it covers it.
If you pull it back, you have access to get in there. So we'll loosen that. And in our case, there are three different steps for the GMC Sierra that we're going to be putting these on. They do recommend setting it to C, but make sure you check the manual and see what's recommended for your vehicle. Now the next step is to get the actual feet on the towers. So ours came with a plastic cover. We just removed that, and making sure that this arrow on the tower is facing out, it just snaps into place. (feet snapping onto tower) And now we can go ahead and slide this onto our crossbar. Because we loosened that metal plate earlier, it should just slide right onto our track like so. Make sure you consult the manual to see the specific measurements for your vehicle, but as you can see, there are little ruler notches on the actual crossbars themselves, so using those will slide the feet to the point where we need it, which is right about here, in our case, and we can get that tightened down. (screwdriver twisting) Once we have our feet on, we can put our end caps back on just like that. As you can see, we already have our first crossbar installed. We got our measurement from the end of our glass windshield here and took it up to the front of the tower. It's going to be vehicle specific, but we have it where we need it in our case. Now we can fit our crossbar onto the roof of our vehicle, trying to do it as carefully as possible. The pads on the bottom should make it a little bit nicer on top of your vehicle, but we'll get it vaguely where we need to be and adjust it. When you actually place the crossbars on top of the vehicle, these feet are nice 'cause they will actually fit in the ridges on top of your roof. Now that we have our crossbars roughly where we need them to be, we'll take a measurement to make sure that the crossbar spread is what's recommended for our vehicle. In our case, it is 32", so we're about there. Just slide this forward a little bit and that's pretty good. Now we'll get clamps installed as well, starting by opening up that security door again, sliding it through, and all we have to do is get our tool through the middle of there and tighten it, probably not all the way just yet. We're gonna have to adjust our other side and we'll probably wanna go back and forth tightening it down just to make sure that one side isn't over-torqued. We've tightened the other side to where we need it to be and this one's about where we need it as well, so we'll close that security gate up and we can fit our racks back, or the end cap back on starting with these cringes down at the bottom and click that in place. Once you've done that, that's basically it. Fairly simple installation, as long as you know where all the pieces are and what they do, but you're ready to hit the road. Overall though, I think that the Yakima Roof Rack System is a sleek and pretty effective roof rack system. I like that the arrow bars will cut down on that wind resistance and I really like that rubberized strip that I don't have to trim. Now, if aesthetics are something that's really important to you, we found that the Rhino-Rack Roof Rack System looks just a little bit sharper, but I like the install of the Yakima Roof Rack System a little bit better, just a little bit easier if you're gonna be taking it on and off a lot, in my opinion, and overall, I think that it's a really nice fit on our 2022 GMC Sierra.
Customer Reviews
Custom Fit Roof Rack Kit With Y00224 | Y00426 | Y53TR - Y67KB
Average Customer Rating: 4.8 out of 5 stars (146 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: DogDoc04/12/2024
Ford Expedition
Easy to install. It probably took 45min. I bought them for my 2024 Expedition to haul a canoe. I have not done that yet but I expect no issues.
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Bob L11/30/2023
product was just what I needed The folks at etrailer were extremely helpufl!!
by: 10/06/2023
Love it! We've made several long trips with full luggage loads.
by: Dan 11/06/2023
Great company. Fast delivery.
by: Frank02/10/2023
Ford Edge
Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.
by: Andrew04/04/2023
Easy to order and quick to ship. Took a bit of time to get these installed correctly so they fit just right.
by: Andrew08/01/2023
Great! Easy to install!
by: Joao07/18/2023
Great service and great staff. They will have all the technical information you need.
by: Philip 05/29/2023
These really look so much better then the factory racks! Easy to install. Easy to order! Great product!
by: Diane 07/28/2023
SIMPLE & EASY1
by: Jason 04/10/2023
They work as advertised and have been holding up great.
by: Greg N.11/18/2021
Ford Expedition
I had a need for the Yakima Crossbars and Towers for my Expedition. With a short delivery time frame, I contacted etrailer knowing they are the best. Justin B. worked with me to get the correct parts then made sure that the products arrived in time, it did. The Towers, Bars and overall excellent customer service from etrailer made for a great experience. Thanks again for exceeding expectations etrailer!
by: Rod12/05/2021
2010 Jeep Grand Cherokee
Product exactly as expected. Quality bars. Using on a 2021 Jeep Grand Cherokee L. Looks great installed. Little to no wind noise. And, as usual, top notch service by the etrailer crew! Have purchased several items from etrailer over the past 10 years and have always been impressed by how timely they are and how responsive and helpful they have been regarding product questions. They are absolutely the first merchant I go to when shopping on line!
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: Elliott08/04/2018
2015 Jeep Grand Cherokee
I have a 2015 Jeep Grand Cherokee SRT which has the non-functional roof side bars. Etrailer.com helped me figure this out and gave me several options that would work. As I already have Yakima bike racks - I wanted to stick with the brand. The price on etrailer.com was the same as Yakima but had free shipping and no tax - awesome. Product arrived quickly!
I went with the Yakima 60" Jetstream cross bars, baseline towers, and the appropriate pads and clips.
The Yakima product came with thorough and easy to understand instructions. I was able to get the track installed and working in about an hour - and that was taking it slow and double checking everything. I was very pleased with the fit and finish.
After a test run, there was no wind noise or issue with the rack. Looking forward to taking a road trip next month with it!
by: John 08/31/2017
2015 Ford Fusion
The Yakima rack system for my 2015 Ford Fusion is an awesome product! I hadn't needed to buy aftermarket racks in many years. These are a super solid, beefy, and very well made product. I am very impressed with the quality and fit. Yakima has obviously put lots of design time into them. And etrailer does an outstanding job of making sure you get the right product for your specific need.
I chose this rack specifically because of the spread between the bars - 32" - and for the higher weight limit, as I'm carrying a fishing kayak.
by: Cary02/14/2022
Great product and etrailer was super helpful with ordering process etc
by: Julio 04/14/2023
Excellent service
by: George 03/20/2023
These bars are way too expensive.
by: Kristopher12/18/2022
Amazing product
by: Jw01/21/2021
GMC
Put this on a 2021 GMC AT4. Use it to carry two kayaks. Rock solid after installed. Almost no wind noise at 70 mph.
25
645
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Recommended Roof Rack for a 2014 Honda Ridgeline We have a couple of options for roof racks depending on whether or not your 2014 Ridgeline has the raised rails that run down the length of the roof. Both of these options have a 165 lbs capacity. I have listed them below: For a naked roof with no rails. Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06186 BaseClip...
view full answer... - Recommended Roof Rack for a 2014 Honda Civic Si CoupeTo add a roof rack to your 2014 Honda Civic Si Coupe you will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06125 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06143 This roof rack attaches to the groves inside your door...
view full answer... - Roof Rack Recommendation for 2020 Honda PilotThe rack you need will depend on how the roof of your 2020 Pilot is fitted out. I really like the Yakima JetStream roof rack, because of how well they're built and designed. They may not be the least expensive option, but they work very well and are extremely durable which makes them the most popular choice for your vehicle. If you have a bare roof, you'll need the following parts: • Yakima 60 inch JetStream crossbars, part # Y00426 • Yakima BaseLine roof rack towers, part # Y28TR •...
view full answer... - Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
view full answer... - Roof Rack Recommendation for Raised Rails on a 2011 BMW 3 SeriesI have a way for you to use longer crossbars for a roof rack on your 2011 BMW 3 Series but since the Thule crossbars have a limiting slot on the underside we need to use a different brand roof rack system and for that I recommend Yakima as they're the only ones with a slot all the way through so you can literally fit any crossbar length. I'm only seeing from all of our manufacturers that a 2011 BMW 3 Series has raised rails so for that Yakima recommends the following parts (if you have...
view full answer... - Recommended Roof Rack for a Hullavator on a 2014 Ford Expedition w/ Raised Side RailsTo use the Thule Hullavator item # TH898 on your 2014 Ford Expedition you're going to need to install a set of crossbars that extend 4" - 8" past the roof racks legs. This allows the lift assist function of the Hullavator to work. Since your Expedition has the raised side rails, I recommend the Roof Rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 TimberLine Towers for Yakima Crossbars - Raised, Factory...
view full answer... - What Roof Rack Can I Use with the Thule Hullavator on My 2022 Toyota Highlander with Flush Rails?I have a great solution for your flush rails on your 2022 Toyota Highlander to use the Hullavator # TH898. Yakima temporarily discontinued the Y00148 because they are updating the feet to fit a wider range of vehicles. Yakima has been changing a lot of fitments lately because of this factor. The landing pads # Y66VR are separate from the Y00148. However, with that being said, Yakima does have a roof rack system that fits your flush rails with a different model of feet. For that system,...
view full answer... - Rola Roof-Rack System for a 2009 Mazda 3 with 4 doorsFor a 2009 Mazda 3 there are several roof rack options depending on how your vehicle is equipped. For a 4-Door with fixed mounting points with no existing rails or crossbars you can use the Rhino Rack roof racks which is made up of the following parts: # RRVA118B-2, # RRRLKVA, and # DK289. For a 4-Door without fixed mounting points with no existing rails or crossbars you can use the Yakima Roof Rack made up of the following parts: # Y00426, # Y28TR, # Y06143, and # Y06111.
view full answer... - Thule Compass Kayak and SUP Carrier Compatibility With Yakima JetStream CrossbarsYes, the Thule Compass Kayak and SUP Carrier w/ Tie-Downs # TH890000 can be used with your Yakima JetStream Crossbars # Y00426.
view full answer... - 2021 Ford Explorer ST Roof Rack Kayak Carrier ComboI like Thule much more than Yakima, I just think they look much better. I recommend getting the Thule WingBar Evo Crossbars - Aluminum - Black - 60" Long - Qty 2 # TH711520 and the Evo Raised Rail Feet # TH710401. These are really nice and simple to use. They will just wrap around your raised side rails of your 2021 Ford Explorer. For your kayaks, I really like the crossbar pads # TH846000 much better especially for larger capacity kayaks. The pads keep the center of gravity a lot lower...
view full answer... - Roof Rack Weight Capacity on 2019 Ford Escape with Moon RoofI checked your owners manual and the weight capacity of 100 lbs without moonroof or 45 lbs with moon roof are for the factory crossbars. Granted, aftermarket crossbars won't greatly increase the capacity, so carrying two kayaks on a moon roof Escape is not a great idea. If you don't have the factory roof rack, then I recommend the Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 # Y00426 and TimberLine Towers # Y33TR which are rated for 132 lbs. These ratings are based...
view full answer... - Recommended Feet And Fit Kit For Installing 53 Thule AeroBlade Crossbars On 2012 Honda CivicI would be happy to recommend the correct feet and fit kit required to install your 53" Thule AeroBlade Crossbars on your 2012 Honda Civic. If you Civic is a sedan you will need the Evo Clamp Feet for Thule Crossbars # TH710501 and Fit Kit # TH145180. If your Civic is a coupe there is not an option for mounting any Thule crossbars so you will need to replace them. I recommend going with the Yakima Roof Rack System which uses Crossbars # Y00426, Crossbar Feet # Y28TR, Fit Kit # Y06125,...
view full answer... - Recommended Fairing for Rola Roof rack on a 2009 Honda Accord SedanYes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
view full answer...
- Inno Fork Mount Bike Rack Compatibility with Yakima Roof Rack Crossbar T-Slot ChannelYes, the Inno Fork Lock Roof Bike Rack - Fork Mount - Channel Mounted - Aluminum # INXA391 has t-bolts that are compatible with Yakima aero bars like the JetStream # Y00426 that have the t-slot channel on top for a clean looking install. If you have the Yakima CoreBar crossbar like # Y00421 then they are not compatible because those aero bars don't have the top channel T-Slot.
view full answer... - Two Load-Assist Kayak Carrier Recommendation for a 2015 Jeep CherokeeEach Hullavator requires 28.5-inches of space on the crossbars. So you would need 57" long crossbars with 4-8 inches of crossbar overhang on each side. That can be accomplished with the Yakima Jetstream 60" Roof Rack System with part numbers # Y00426 and # Y33TR. Your 2015 Jeep Cherokee has a load capacity of 150 lbs with a roof rack according to the Owner's Manual. The Thule Hullavator Kayak Carriers # TH898 weigh 40-lbs each by themselves plus your 72 lbs worth of kayak would be a total...
view full answer... - Will Rhino-Rack Vortex Crossbars and SX Legs Fit a 2015 Honda PilotThe 54" Vortex Crossbars # RRVA137B-2 and SX Series Legs # RRSX100 from Rhino-Rack will fit great on your 2015 Honda Pilot as long as you have the raised rails. If you don't have the raised rails then we need to look at a different brand of roof rack as Rhino-Rack doesn't have a fit for the naked roof version of your Pilot. For your application I recommend the Yakima JetStream system which is an improved version of the Vortex bars you were looking at. For a complete roof rack system you...
view full answer... - Roof Rack and Kayak Carrier for a 2018 Chevrolet MalibuWe have plenty of kits that will work great for your 2018 Chevrolet Malibu. I recommend the Yakima JetStream Crossbars # Y00426, BaseLine Towers # Y28TR, and BaseClip Fit Kit # Y06123. These components will make up your roof rack. As far as a kayak rack to haul your kayaks, the etrailer J-Style Kayak Carrier # e98878 is a great option because it comes with straps to tie your kayaks to the carrier and bow/stern straps with anchors. You would need two kits, one for each kayak. If you would...
view full answer... - Roof Rack and Cargo Box Recommendation for 2020 Ford ExplorerI checked with Yakima and they have their Jetstream roof rack part numbers # Y00426 and # Y33TR as a confirmed fit for your 2020 Ford Explorer with raised rails and the moonroof. They recommend carefully watching the setup so that the bars don't interfere with the sunroof as you open it but the bars can be positioned so that it would work fine. Then for an easy to use cargo box that fits this rack and also has best clearance for opening the rear hatch you'd want the Thule Motion XT part...
view full answer... - Best Roof Rack for 2020 Ford Escape with Naked RoofThe best roof rack for your 2020 Ford Escape is from Yakima because it will give your Escape a roof rack that is strong (165 lb weight capacity), durable (all parts have a lifetime warranty), quiet and looks sleek. The roof rack for your '20 Escape is made up of: - Yakima JetStream Crossbars # Y00426 (Black) - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima Roof Rack # Y06137 and # Y06152 - Same Key System Lock Cores (Optional) # Y07204 The aero shape of the...
view full answer... - How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
view full answer... - Correct BaseClip Fit Kit for Yakima JetStream Crossbars on a 2024 Ford F-350 Crew CabFor your 2024 Ford F-350 Crew Cab using the Yakima JetStream Crossbars # Y00426 you're going to need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185 with the towers # Y28TR.
view full answer... - How to Add Platform Rack to 2020 Toyota Highlander With Naked RoofWhile you can add a platform rack to your 2020 Toyota Highlander, I checked with our manufacturers and there isn't a direct-mount option for your vehicle. So the only option for your Highlander, assuming it does have a naked roof without flush rails, is to add a roof rack which you can then add the platform rack to. There is one option for this from Yakima, and I verified with them the correct parts for the rack, as well as the correct size of platform needed. The exact parts that will...
view full answer... - Best Roof Rack For A Rooftop Tent On A 2021 Subaru AscentThe best set up for a rooftop tent would be the Yakima JetStream roof rack system because it's easy to use, reliable, and has a weight capacity of 165 lbs. To connect this to the raised rails on your 2021 Subaru Ascent you need the 60" JetStream Crossbars # Y00426 along with the TimberLine Towers # Y33TR. To add locks to the TimberLine Towers you can do so with the kit # Y07204. This will help prevent a passerby from being able to remove the roof rack easily.
view full answer... - Quietest Cross-Bars For A 2017 Ford F-150 Super Crew CabFor your 2017 Ford F-150 SuperCrew Cab, we have several different options that will suit your needs. To start, we offer the Yakima JetStream Crossbars # Y00426. These bars are the quietest, are 60" long, and is rated for up to 165lbs. To go with those bars you will also need the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06122. We always recommend using some type of locking system to keep all of your items safe; The Yakima...
view full answer... - Which Yakima Landing Pads for 2021 Toyota Highlander to Mount Skyline TowersTo use the Yakima Skyline Towers # Y53TR on your 2021 Toyota Highlander the correct landing pads are the Landing Pad 28 for Skyline and Control Towers # Y66VR.
view full answer... - Roof Rack Recommendation for 2020 Honda PilotThe rack you need will depend on how the roof of your 2020 Pilot is fitted out. I really like the Yakima JetStream roof rack, because of how well they're built and designed. They may not be the least expensive option, but they work very well and are extremely durable which makes them the most popular choice for your vehicle. If you have a bare roof, you'll need the following parts: • Yakima 60 inch JetStream crossbars, part # Y00426 • Yakima BaseLine roof rack towers, part # Y28TR •...
view full answer... - Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
view full answer... - How to Determine if Two Malone SeaWing Kayak Carriers Fit 2019 Subaru Outback Factory Roof RackYour kayaks will fit the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD, but two of them will not fit your 2019 Subaru Outback's factory roof rack because the crossbars simply are not long enough for both the carriers and your 30" wide kayaks. So to use a kayak carrier you'll need an aftermarket roof rack, and the verified fit to replace the roof rack on your 2019 Outback is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00428...
view full answer... - What Roof Rack Can I Use with the Thule Hullavator on My 2022 Toyota Highlander with Flush Rails?I have a great solution for your flush rails on your 2022 Toyota Highlander to use the Hullavator # TH898. Yakima temporarily discontinued the Y00148 because they are updating the feet to fit a wider range of vehicles. Yakima has been changing a lot of fitments lately because of this factor. The landing pads # Y66VR are separate from the Y00148. However, with that being said, Yakima does have a roof rack system that fits your flush rails with a different model of feet. For that system,...
view full answer... - Best Roof Rack for 2020 Kia Soul with Fixed Mounting PointsThe best roof rack for your 2020 Kia Soul with a naked roof (fixed mounting points) is from Yakima because it will give your Kia a roof rack that combines effectiveness and style while minimizing any wind noise that can occur with lesser roof racks. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack will look stellar atop your 2020 Kia...
view full answer... - Yakima Roof Rack for 2022 Subaru LegacyYou are on point with Yakima being a really high-quality product so I completely understand wanting to stick with them for a roof rack on your 2022 Subaru Legacy. The Yakima roof rack that fits your Legacy consists of the following parts: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 for Yakima Towers # Y00248 - Same Key System Lock Cores (Optional) # Y07204 I have added links to video reviews for you to check out as well.
view full answer... - Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
view full answer... - Yakima Roof Rack Parts Needed for a 2017 Subaru Outback WagonYes, the recommended Yakima Landing pad for the 2017 Subaru Outback is the Landing Pad 15 part # Y00241 that you referenced. For crossbars you would want the part # Y00408, for towers part # Y53TR and adapters part # Y03536. All of these components would complete a roof rack for your vehicle.
view full answer... - 2010 Outback Roof Rack OptionsAdding feet to your 2010 Subaru Outback Wagon will not change the weight limit of the rack. The maximum weight limit will still be 165lbs. Adding the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 51" Long - Qty 2, part # RRRTS551, does not change that. In fact, adding an extra feet/legs and crossbars to your roof rack will actually lower the weight you can carry on your roof. That is because your roof rack's weight actually counts toward the 165lb weight total. I would use my existing...
view full answer... - Roof Rack that Can Fit 2023 Jeep Wrangler Rubicon with Sky One Touch RoofThe Yakima Jetstream roof rack part numbers # Y00428, # Y53TR, # Y00226 is a fit for your 2023 Jeep Wrangler Rubicon that has the sky one touch roof and would do a great job to carry a tent and other cargo.
view full answer... - Roof Rack & Attachments For 2010 Toyota Tacoma TRD SR5I would get the Yakima HD Bar Roof Rack System. You'll need the HD bars # Y01156 Skyline Towers # Y53TR HD bar adapter # Y03541 and landing pad # Y74FR. You can then use the JayLow Kayak Carrier # Y04073, Off-Grid Cargo Basket # Y07139 or Skybox Cargo Box # Y95AV. These are just my suggestions for accessories but there is much much more on our website if you're wanting something different!
view full answer... - Will the Rhino-Rack # Y01-130B Fit My 2022 Hyundai Santa Cruz?Yes, you will be able to put 2 bikes on the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount # Y01-130B if the combined weight of the racks and bikes is exactly 220 pounds (or under). As far as the fitment of the # Y01-130B on your 2022 Hyundai Santa Cruz, that is a bit more complicated. The tracks will fit with the included hardware with drilling. With the 63" tracks, you can cut the tracks to the size of the bed rails. The complicated part is the crossbar fitment....
view full answer... - Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof TentThe Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
view full answer... - Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting PointsFor the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
view full answer... - Parts To Use Existing Yakima Aero bars With RetraxONE For Toyota TacomaIt is possible to use your Yakima Aero bars on the RetraxONE part # RTT-60851 for the 2017 Toyota Tacoma. You need 2 sets of landing pads part # Y00221 to slide into the tracks of the Retrax system. You need one set (quantity of 4) of Yakima Skyline Towers part # Y53TR to attach to the landing pads. Then the Aero bars mount to the towers.
view full answer... - Roof Rack Recommendation for Rhino Rack Sunseeker II Awning on 2017 Ram ProMaster CitySince the Sunseeker II Awning Item # RR32105 only fits Rhino-Rack Heavy-Duty, Aero and Sportz crossbars; Thule and Inno square crossbars; Yakima round crossbars we have a solution, but it's not the Rola rack you mentioned. You'd want the Yakima Round Bar Rack part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which would fit and work well on your vehicle and with the Sunseeker. You will also need the adapter part # RR32105 too with the round bars.
view full answer... - How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
view full answer... - Recommended Roof Rack for 2024 Toyota RAV4For an extremely quiet roof rack that fits your 2024 Toyota RAV4 with flush mounted rails I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 -SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR -Landing Pad 23 for Yakima SkyLine and Control Towers # Y98FR The JetStream bars use an asymmetrical design along with WindRidges to reduce drag, noise, and...
view full answer... - Recommend Roof Rack for a Bike and Kayak on a 2018 Honda CR-VIn order to add a roof rack to your 2018 Honda CR-V I recommend using the Yakima Roof Rack made of parts # Y01156, # Y53TR, # Y03541 and # Y00245. This system has heavy duty yet lightweight aluminum cross bars that are durable and rustproof. This option will also be far more cost effective than an OEM roof rack as I am sure you will come to find out. If you need a kayak carrier then I recommend the Rhino-Rack Nautic Roof Kayak Carrier part # RR570. It is side-loading and it comes with...
view full answer... - Length of Yakima Crossbars Needed to Load 2 Thule Hullavators # TH898 on a 2019 Honda PilotWhile we do technically have an option for mounting 2 Hullavators # TH898 onto your 2019 Honda Pilot with the Yakima SkyLine Towers # Y53TR and Landing Pad 19 # Y00245 on your flush rails, you would need at least 72" inches of usable crossbar space for the required 4-8 inches of length past the feet. This is because one Hullavator measures 36" long. The 70" JetStream crossbars # Y00427 does not provide enough length. With that being said, the only Yakima option we carry that has that length...
view full answer... - Can Thule Hullavator Install on Yakima CrossbarsThe Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
view full answer... - Is There A Trailer Hitch For 2023 Kia Soul GT Line With Center ExhaustIf you need to carry cargo with your Kia Soul, I do have a few potential solutions for you. I will tell you there is not a trailer hitch available anywhere that will fit the center exhaust model at this time (August 2023). The receiver would go exactly where the exhaust sits and there is no way to work around that. If your goal was to carry a few bikes we could set you up with a trunk mount bike rack like the Malone hanger # MPG2139. This can carry 3 bikes weighing up to 33 lbs apiece...
view full answer... - Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda PilotThank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
view full answer... - How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
view full answer... - Parts Needed to Carry Spare Wheel on Roof of 2008 Hummer H3If you installed a Yakima roof cargo basket like the # Y07070 you could use the Spare Tire Carrier part # Y07076 to carry the spare on your roof. You would need a roof rack installed on your 2008 Hummer H3 as well like the Yakima round bar roof rack part # Y00408, # Y53TR, # Y03536, and # Y00224. We don't have a good solution to cover where the old spare was installed. If you make it near St. Louis MO we could help out with the install too!
view full answer... - Recommended Roof Rack for a 2012 Land Rover Range Rover SportThe roof rack I recommend for a 2012 Land Rover Range Rover Sport will be dependent on roof configuration. If you have a bare roof then I recommend the Thule WingBar Evo Crossbar System part # TH711520, part # TH710501, and part # TH145116. If you have factory installed tracks then I recommend the Yakima Jetsream Crossbar System part # Y00426, part # Y53TR, and part # Y00224. These are both excellent top-of-the-line options.
view full answer... - Recommended Roof Rack and Mud Flaps for 2007 Hummer H3For your 2007 Hummer H3, I recommend the Yakima JetStream Roof Rack, which consists of parts # Y00425, # Y00148 and # Y00224. This rack features two 50 inch, aerodynamic crossbars with a weight capacity of 165 pounds. They have a lightweight, durable and rustproof aluminum construction that will be perfect for your particular driving conditions. The asymmetrical shape will provide an extremely low profile and quiet system when installed on your Hummer. The SkyLine Towers will attach to...
view full answer... - Roof Rack Recommendation for a 2008 Hummer H3 with Factory TracksFor a roof rack that is confirmed to fit the tracks on your 2008 Hummer H3 you would want the Yakima part numbers # Y00408, # Y53TR, # Y03536, and # Y00224. You can also lock this rack with the lock core set part # Y07204 which would help prevent theft. Sorry to hear about your factory rack getting stolen.
view full answer... - Landing Pads For Rails Of A Carry On Utility Trailer For Yakima Control TowersIf the rails you are referring to on your utility trailer are the track style, then your Yakima Control Towers will fit with Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224. If you will me drilling into metal support rails then you will want the Landing Pad 7 for Yakima Control Towers for Metal Roofs - Qty 2 # Y00227. You may also be interested in the Round 78" CrossBars for Yakima Roof Rack System (QTY 2) # Y00411 or the Round 86" CrossBars for Yakima Roof-Rack System (QTY 2)...
view full answer... - Roof Rack Recommendation for 2009 Hummer H2For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well. We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer.
view full answer... - What is the Difference Between Yakima Landing Pads 1 and 4The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
view full answer... - Recommended Crossbars and Roof Basket for a 2008 Hummer H3 With Factory RailsFor your 2008 Hummer H3, I recommend checking out the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket # Y07080-82. This cargo basket will easily attach to a set of crossbars like the Yakima HD Crossbars # Y01156, measures 74" long x 48" wide x 6-1/2" tall, and has a maximum weight capacity of 130-lbs. To finish the crossbar setup, you'll also need the SkyLine Towers for Yakima Crossbars # Y53TR, HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers #...
view full answer... - Recommended Bike Carrier for Hummer H3The Swagman Pick-Up Truck-Bed-Mounted Bike Carrier is designed for pick up truck beds, so it is not a fit for your Hummer H3. However, I do have several bike carrier options for your Hummer. Our most popular bike rack for the Hummer H3 is the Swagman Original # S64400 4 Bike Rack for 2" Hitches. I have linked to a video review of the bike rack for you to check out. I have also linked you to a FAQ article that shows how to measure the distance between your hitch pin hole and the furthest...
view full answer... - Roof Rack Recommendation for 2005 Chrysler Town and Country VanYour 2005 Chrysler Town and Country van could be equipped with three possible roof configurations (factory tracks, raised side rails or nothing at all). From your description is sounds like you have the factory tracks. For this roof style we have rack options that can be seen on the link provided. A cost-effective basic round bar system is offered from Yakima and consists of parts # Y00408, # Y00224, # Y53TR and # Y03536. Round bars offer excellent compatibility with accessories like bike...
view full answer... - Will Yakima Landing Pad 1 and 4 Fit Rhino-Rack RTC-Style Roof Rack TracksYes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2. To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following: 48" Round Bars - # Y00408 58" Round Bars...
view full answer... - Roof Rack for 2007 Hummer H3 with Roof Rack ChannelsFor your 2007 Hummer H3 with the roof tracks like you pointed out we have the Yakima Skyline roof rack part numbers # Y00425, # Y53TR, and # Y00224 as a confirmed fit. This attaches to the slots you have and gives you a high quality rack that due to it's bar shape will be very aerodynamic.
view full answer... - Roof Rack Fits for 2003 Chevrolet SuburbanThe current Yakima round bar roof rack that fits your 2002 Dodge Grand Caravan consists of parts # Y00408, # Y53TR, # Y03536 and # Y00224. All roof rack fits for the 2003 Suburban are shown on the linked page but no Yakima branded racks are among them. You can select your roof type using the drop-down menu tool at the top of the page to see roof racks that will work on your 2003 Suburban. If you have factory roof tracks then a cost-effective square bar rack confirmed to fit is the Inno...
view full answer... - Parts Needed to Carry the Thule Roof Mounted Cargo Basket # TH859XT on a 2005 Dodge CaravanTo carry the Thule Canyon XT Roof Mounted Cargo Basket # TH859XT on your 2005 Dodge Caravan you will just need a roof rack (if you don't already have one). The Thule basket is compatible with round, square, aero, elliptical, and most factory crossbars. Should you have the factory installed tracks that front to back I recommend the Yakima roof rack which consists of their JetStream Crossbars # Y00425, the SkyLine Towers # Y53TR, and the Landing Pad 4 # Y00224. For a 2005 Caravan that has...
view full answer... - Recommended Yakima Roof Rack for 2007 Land Rover LR3 with Factory Track SystemThe Thule Fit Kit # THKIT3112 is the confirmed fit for your 2007 Land Rover LR3. Since they do not fit in the way you desire, I recommend the Yakima Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224 ( you will need 2 kits), the Skyline towers # Y53TR and the Jetstream Crossbars # Y00425. I also recommend the locks to secure your roof rack # Y07204. This system will mount differently into your factory rails for a confirmed fit.
view full answer... - Parts Needed to Use a Yakima OverHaul HD Ladder Rack and Roof Rack with a Pace Edwards Ultra GrooveI believe that I know what you are wanting to do. You are wanting the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 which fits your Sierra and is compatible with your Pace Edwards Ultra Groove tonneau cover. This provides you with a ladder rack that uses Yakima HD bars. Then you also want to use the HD bars on roof rack towers to provide a lower rack using the t-slots in your Ultra Groove Rails. In that case, the Landing Pad 4 for Yakima SkyLine and...
view full answer... - How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
view full answer...
- Roof Rack Spacing On Roof Of 2006 Dodge Caravan With Sliding DoorsWhen installing the Yakima roof rack on your 2006 Dodge Caravan with the sliding doors, the location of the feet and bars is not something that can be adjusted for each load. They are designed for a specific location so you would need to use other accessories like a roof basket for your specific load to give further support. To order the roof rack custom made for your Caravan, you will need part # Y00425, # Y53TR, and part # Y00224. I have attached a product review video for this roof...
view full answer... - How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
view full answer... - Parts Needed to Carry Spare Wheel on Roof of 2008 Hummer H3If you installed a Yakima roof cargo basket like the # Y07070 you could use the Spare Tire Carrier part # Y07076 to carry the spare on your roof. You would need a roof rack installed on your 2008 Hummer H3 as well like the Yakima round bar roof rack part # Y00408, # Y53TR, # Y03536, and # Y00224. We don't have a good solution to cover where the old spare was installed. If you make it near St. Louis MO we could help out with the install too!
view full answer... - Recommended Roof Rack for a 2012 Land Rover Range Rover SportThe roof rack I recommend for a 2012 Land Rover Range Rover Sport will be dependent on roof configuration. If you have a bare roof then I recommend the Thule WingBar Evo Crossbar System part # TH711520, part # TH710501, and part # TH145116. If you have factory installed tracks then I recommend the Yakima Jetsream Crossbar System part # Y00426, part # Y53TR, and part # Y00224. These are both excellent top-of-the-line options.
view full answer... - Recommended Roof Rack and Mud Flaps for 2007 Hummer H3For your 2007 Hummer H3, I recommend the Yakima JetStream Roof Rack, which consists of parts # Y00425, # Y00148 and # Y00224. This rack features two 50 inch, aerodynamic crossbars with a weight capacity of 165 pounds. They have a lightweight, durable and rustproof aluminum construction that will be perfect for your particular driving conditions. The asymmetrical shape will provide an extremely low profile and quiet system when installed on your Hummer. The SkyLine Towers will attach to...
view full answer... - Roof Rack Recommendation for a 2008 Hummer H3 with Factory TracksFor a roof rack that is confirmed to fit the tracks on your 2008 Hummer H3 you would want the Yakima part numbers # Y00408, # Y53TR, # Y03536, and # Y00224. You can also lock this rack with the lock core set part # Y07204 which would help prevent theft. Sorry to hear about your factory rack getting stolen.
view full answer... - Landing Pads For Rails Of A Carry On Utility Trailer For Yakima Control TowersIf the rails you are referring to on your utility trailer are the track style, then your Yakima Control Towers will fit with Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224. If you will me drilling into metal support rails then you will want the Landing Pad 7 for Yakima Control Towers for Metal Roofs - Qty 2 # Y00227. You may also be interested in the Round 78" CrossBars for Yakima Roof Rack System (QTY 2) # Y00411 or the Round 86" CrossBars for Yakima Roof-Rack System (QTY 2)...
view full answer... - Roof Rack Recommendation for 2009 Hummer H2For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well. We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer.
view full answer... - What is the Difference Between Yakima Landing Pads 1 and 4The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
view full answer... - Recommended Crossbars and Roof Basket for a 2008 Hummer H3 With Factory RailsFor your 2008 Hummer H3, I recommend checking out the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket # Y07080-82. This cargo basket will easily attach to a set of crossbars like the Yakima HD Crossbars # Y01156, measures 74" long x 48" wide x 6-1/2" tall, and has a maximum weight capacity of 130-lbs. To finish the crossbar setup, you'll also need the SkyLine Towers for Yakima Crossbars # Y53TR, HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers #...
view full answer... - Recommended Bike Carrier for Hummer H3The Swagman Pick-Up Truck-Bed-Mounted Bike Carrier is designed for pick up truck beds, so it is not a fit for your Hummer H3. However, I do have several bike carrier options for your Hummer. Our most popular bike rack for the Hummer H3 is the Swagman Original # S64400 4 Bike Rack for 2" Hitches. I have linked to a video review of the bike rack for you to check out. I have also linked you to a FAQ article that shows how to measure the distance between your hitch pin hole and the furthest...
view full answer... - Roof Rack Recommendation for 2005 Chrysler Town and Country VanYour 2005 Chrysler Town and Country van could be equipped with three possible roof configurations (factory tracks, raised side rails or nothing at all). From your description is sounds like you have the factory tracks. For this roof style we have rack options that can be seen on the link provided. A cost-effective basic round bar system is offered from Yakima and consists of parts # Y00408, # Y00224, # Y53TR and # Y03536. Round bars offer excellent compatibility with accessories like bike...
view full answer... - Will Yakima Landing Pad 1 and 4 Fit Rhino-Rack RTC-Style Roof Rack TracksYes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2. To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following: 48" Round Bars - # Y00408 58" Round Bars...
view full answer... - Roof Rack for 2007 Hummer H3 with Roof Rack ChannelsFor your 2007 Hummer H3 with the roof tracks like you pointed out we have the Yakima Skyline roof rack part numbers # Y00425, # Y53TR, and # Y00224 as a confirmed fit. This attaches to the slots you have and gives you a high quality rack that due to it's bar shape will be very aerodynamic.
view full answer... - Roof Rack Fits for 2003 Chevrolet SuburbanThe current Yakima round bar roof rack that fits your 2002 Dodge Grand Caravan consists of parts # Y00408, # Y53TR, # Y03536 and # Y00224. All roof rack fits for the 2003 Suburban are shown on the linked page but no Yakima branded racks are among them. You can select your roof type using the drop-down menu tool at the top of the page to see roof racks that will work on your 2003 Suburban. If you have factory roof tracks then a cost-effective square bar rack confirmed to fit is the Inno...
view full answer... - Parts Needed to Carry the Thule Roof Mounted Cargo Basket # TH859XT on a 2005 Dodge CaravanTo carry the Thule Canyon XT Roof Mounted Cargo Basket # TH859XT on your 2005 Dodge Caravan you will just need a roof rack (if you don't already have one). The Thule basket is compatible with round, square, aero, elliptical, and most factory crossbars. Should you have the factory installed tracks that front to back I recommend the Yakima roof rack which consists of their JetStream Crossbars # Y00425, the SkyLine Towers # Y53TR, and the Landing Pad 4 # Y00224. For a 2005 Caravan that has...
view full answer... - Recommended Yakima Roof Rack for 2007 Land Rover LR3 with Factory Track SystemThe Thule Fit Kit # THKIT3112 is the confirmed fit for your 2007 Land Rover LR3. Since they do not fit in the way you desire, I recommend the Yakima Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224 ( you will need 2 kits), the Skyline towers # Y53TR and the Jetstream Crossbars # Y00425. I also recommend the locks to secure your roof rack # Y07204. This system will mount differently into your factory rails for a confirmed fit.
view full answer... - Parts Needed to Use a Yakima OverHaul HD Ladder Rack and Roof Rack with a Pace Edwards Ultra GrooveI believe that I know what you are wanting to do. You are wanting the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 which fits your Sierra and is compatible with your Pace Edwards Ultra Groove tonneau cover. This provides you with a ladder rack that uses Yakima HD bars. Then you also want to use the HD bars on roof rack towers to provide a lower rack using the t-slots in your Ultra Groove Rails. In that case, the Landing Pad 4 for Yakima SkyLine and...
view full answer... - How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
view full answer... - Roof Rack Spacing On Roof Of 2006 Dodge Caravan With Sliding DoorsWhen installing the Yakima roof rack on your 2006 Dodge Caravan with the sliding doors, the location of the feet and bars is not something that can be adjusted for each load. They are designed for a specific location so you would need to use other accessories like a roof basket for your specific load to give further support. To order the roof rack custom made for your Caravan, you will need part # Y00425, # Y53TR, and part # Y00224. I have attached a product review video for this roof...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Video Edited:
Chris R
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.