Custom Fit Roof Rack Kit With Y00224 | Y00421 | Y53TR
(162 reviews)
Price: $618.80
In Stock
Custom Fit Roof Rack Kit With Y00224 | Y00421 | Y53TR
Item # Y49GB
Our Price: $618.80
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (162)
- Q & A (0)
- Videos (54)
- Photos
Yakima Roof Rack - Y49GB
- Crossbars
- Aero Bars
- 2 Bars
- 50 Inch Bar Space
- Yakima
- Black
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Features:
Yakima 50" CoreBar SM:- Aero-style, steel crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit (sold separately) to create a complete roof rack
- Aerodynamic, teardrop shape helps to create a quiet roof rack system
- Controls air flow to significantly reduce wind noise and vibration
- Reduces drag to help maintain your fuel efficiency
- Full-length crossbars maximize space for clamp-on carriers and accessories
- Accommodate most universal-mount bike, water, snow, and cargo carriers
- Easy installation on Yakima towers with included brackets and hardware
- Works with BaseLine, RidgeLine, SkyLine, and TimberLine towers (sold separately)
- Roll-formed, galvanized steel bars are extremely strong and durable
- Black vinyl coating protects the bars from corrosion
- Plastic endcaps help to keep water and debris out of bars
Yakima Landing Pad 4 (Set of 2):
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with factory track racks
- Attach to factory tracks with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Yakima SkyLine Towers (4-pack) (w/new covers):
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads (sold separately) to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter (Y03536 - sold separately)
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000224 Landing Pad 4 for Yakima Control Towers
8000421 Yakima Core Bar Cross Bars - Steel - Aero Profile - 50" Long - Qty 2
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Custom Fit Roof Rack Kit With Y00224 | Y00421 | Y53TR
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Crossbars SkyLine Towers Review
Hey everyone, it's Evangeline here at etrailer and today we'll be taking a look at our Yakima SkyLine towers. These are designed for your fixed mounting points, your flush rails, or your track systems. So if the roof of your vehicle looks like this, you probably need these. If you wanna carry around roof mounted accessories like kayaks or ladders or maybe you need to bring a Christmas tree home, you first need a roof rack system. Now this is gonna be the Yakima SkyLine towers for those vehicles that specifically require a custom fit kit for their fixed mounting points. Now if your vehicle does not look like this you might have a naked roof or raised rails.
That's why it's very important before anything to use our fit guide here at etrailer.com. Put your year, make model and then find the right fit for you. And if this is one of them let's take a look at how it works. Etrailer.com also helps you get the full kit for your vehicle because the skyline towers don't work alone you also need the appropriate crossbars as well as the correct fit kit or landing pads for you. But with this, you get a low profile roof rack so it doesn't stick too high up.
You get a heavy duty weight capacity since this is an aluminum roof rack. So usually they have 165 pounds capacity, depends on the vehicle, and you have this very sturdy but also very custom fit kit for your vehicle. That way, no matter what you put on it within reason and wherever you go, you know it's gonna stay there. But my favorite feature about this roof rack is the door design. So you pinch on the door to open it and that's it.
Just like that, you can lift the whole roof rack off of your roof. When you need to install it, you just pop it right back on. So the height of the tower is about 3 1/2" from your fixed mounting point to the top of the tower. The actual height can change depending on what crossbars you have and what rails you have, but compared to a lot of the other flush mounted crossbars and roof racks, it's just very low to the roof. Now with this style of a rack though, you are limited to the fixed mounting points or the flush rails of your vehicle.
So wherever they are, that's how much crossbar spread you get. For example, ours is set to 28" apart. On the other hand, if you have an aggressive tilt to your roof, you can actually adjust this up to six degrees forward or six degrees backward to help even out the playing field. Now I like to leave my roof rack on my vehicle and Yakima is pretty known for its durability. So the SkyLine towers are made of glass reinforced plastic, aluminum, stainless steel and elastomer. So all that is combined to help them stay strong even if you leave them on all day, all year. But if you do need to take off your roof rack you also have a feature to make it more low profile. Start by flipping both doors open and then you can lift the roof rack up and off of your roof. This way you can store it inside of your garage or in your house. You can leave your base on your roof rails. All you need to do is cover them with the included cover and that's it. You're done. The covered bases sit about 2" high up off of your fixed mounting point and makes for a much more low profile look. Your towers will have everything you need to install them which really is just one tool. And your fit kit has the hardware needed to undo the factory mounting points on your vehicle or for your track system if that's what you have. Now, that install process is extremely simple. Let's take a look at it. So these are what your towers look like when they are not on your roof. So they come all assembled in the box. All you need to do is get the appropriate landing pads for your vehicle. These landing pads can look different depending on your car and that's why it's very important to use our fit guide to get the right fit for you. You have four towers as well as the torque tool. And depending on your crossbars, you will also get a separate adapter to be used with those specific bars. With your landing pad kits, you'll get a part that fits your specific vehicle. You will get the hardware needed to install that part and you will have the base as well as the base cover. So if the towers are not on your vehicle you could just cover that base pad and take the cover off to install the tower. Here's an example of how the landing pad can be used depending on your cars. So you have a factory mounting point in this specific flush rail. So the pad goes over that hole and then you're gonna get your base which goes on top of that pad. And then you have a bolt with split washer and flat washer which is used to tighten down those two pieces to your car. The torque tool for your towers comes in handy whenever you're tightening down those bolts because it has a setting for tension. Once you get enough tension, it automatically clicks and prevents you from over tightening. Now to set up your tower for your crossbars there's different adaptor pieces. We're using the one for the JetStream crossbars. So we start by pushing in this plate into the tower. So you are gonna hear some clicks and that's how you know it's secure. Now we're gonna open up the tower door. So this involves pinching the door and pulling. Be careful because if you slide your fingers forward it doesn't feel as good. But with the door open, you can then loosen this bolt up front. It says to do it eight times. I just go until the bolt underneath is visible so you can see underneath what I mean. Notice how you have this little bolt head hiding around. You're gonna try to get at it with the tool. You can see how I do have access. That means as we flip this tower back over I can put this plate up top and then I can tighten down and thread onto that plate. With adapter and plate, this can now slide into your crossbar. For other adapters, they're designed to slide over or around your crossbar. With this specific style, I do recommend for the initial slide making sure that this is loose, but after that even if you have it fully tightened down you'll still be able to slowly adjust it on the crossbar. So with the towers on you're then ready to put this onto your roof. Now what I do is I just kind of roughly measure how far apart our landing pads are and that's when I can measure on the towers the distance apart they roughly need to be, in my case, 43 1/2. You could be off by 1/2" or so 'cause you can still move them. Also, supposedly this is when you put the rubber pieces inside of your crossbars. I do that after I've already installed them onto the roof. I take them back off and then I push them in so that I know exactly where the towers will be sitting. Make sure your towers are torqued down at their bottom bolt. Do that for both sides before installing. This is a lot easier with a friend on the other side but still doable with one person. So leave those doors open so that you can gently place them onto your roof. The bottom bracket with the door open fits onto your base so see how that just pushes into place. And then to secure it, just push that door close and you've got a sturdy fit. If you're using Yakima same key system lock cores, this is a time to switch them out on your towers. But other than that, just double check that all the towers are strong and secure and everything is sturdy. And that's it for the install of your roof rack. That right there was a look at the Yakima SkyLine towers for your Yakima crossbars for when you have vehicles that have fixed mounting points, flush rails or track systems.
Customer Reviews
Custom Fit Roof Rack Kit With Y00224 | Y00421 | Y53TR - Y49GB
Average Customer Rating: 4.8 out of 5 stars (162 Customer Reviews)
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Howard11/09/2023
2019 Hyundai Santa Fe
From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with.
There were delays in getting my product that were on the supplier side and out of etrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution.
My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck.
But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them.
Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Laura 04/01/2024
As described! Quick delivery!
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Matt 01/02/2024
Great product great service
by: Cody05/25/2023
2017 Toyota Camry
I've just recently installed this setup on my 2015 Toyota Camry.
etrailer - Shopping for this rack was fairly simple, and the shipping from etrailer was quick and reliable. I received the rack in 2 different shipments but they both arrived at the same time. etrailer made sure the all the contents were available. They also have several resourceful videos on their YouTube page, which was helpful while shopping for the rack and during a few trouble shooting items while I was installing.
Yakima Core Bar - Overall a quality product. Everything necessary was supplied, including a handy measuring tape and some very well written instructions. The fit is clean and very sturdy. The only qualm I have is that the hex hole in the large anchor bolts are a bit larger than the supplied hex driver. Toward the end of the installation, the tool was worn and ended up turning inside the bolt itself (not due to over torquing whatsoever). I ended up having to use a hex set I had in my toolbox to complete the installation because the provided tool was starting to strip out the anchor bolt. With that said, the kit is still a great kit that meets my expectations.
Wind noise is quieter than my OEM VW bars on my 2017 Volkswagen GTI. It's noticeable, but nothing extreme - I believe that's just the price you pay when adding crossbars to a vehicle.
Verdict - etrailer has definitely met my expectations, and the Yakima kit provided is a well designed kit that fits well!
by: Adam K05/14/2023
Should include extra end caps just in case they fall off.
by: Lisa04/12/2019
Honda Ridgeline
These crossbars feel like they are well made and sturdy. It took less than 30 minutes to install with the Ridgeline Towers. I love the look of the bars! Can't wait to load the Kayaks up and get out on the water.
by: Dan 11/06/2023
Great company. Fast delivery.
by: Steve30001/14/2023
Very sturdy, well made. The assembly instructions are not too good but if you call Yakima they will provide additional instructions.
by: Mike06/20/2018
2017 Ford Edge
Very happy with the Yakima roof top rack kit for my 2017 Ford Edge with glass roof. The instructions were a little confusing at first, but after reading through them a couple of times while working with the product they became much clearer. The Yakima fit site was helpful as well. After the initial cross bar mounting measurements and set up, attaching and detaching the racks from the roof is a very simple process.
by: Philip 05/29/2023
These really look so much better then the factory racks! Easy to install. Easy to order! Great product!
by: Mark06/30/2023
Feel solid, not too tricky to install
by: Joshua11/19/2020
antastic company and wonderful service, one of the racks was the wrong size for my car so they were able to help find the right size for my Car. Absolutely great company, with fast shipping and just the products I needed for my Car!. Very helpful, and overall smooth transaction and service. I will order from this company again very soon!. shipping came in a very strong and solid box. I highly recommend buying from them!. 10/10 all the way!.
by: Axl01/02/2017
Very good product. The Yakama towers and cross bars feel very solid and appears to be high quality. Very easy install. Others have complained about the instructions, but guess I'm a visual person because the pictures all seemed very clear to me and the install was very easy. They do sit higher than I expected. After adding a Rhino Rack cargo basket, we only have about 4-5" clearance below the garage door.
by: Rafael07/03/2020
Roof rack fits and works as advertised. Over the phone customer support for sales and install directions were very helpful and thorough. Geoff is an excellent brand ambassador who goes above and beyond to fulfill customer expectations. I will definitely be shopping at etrailer for my future vehicle needs. Well done!
by: Emerson07/20/2020
All parts arrived in good order, haven't completed assembly yet as I had cross threaded one of the support brackets. Hopefully soon
by: Jeremy06/05/2018
My experience with etrailer has been excellent. There was going to be a potential delay in one of the products, but their customer service promptly informed me, half the price of some of their competitors so can't really complain. In the end they got the part ahead of schedule and was able to ship in a timely manner. I will definitely keep them in mind for future purchases.
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: Emma S.06/27/2020
I am thrilled this got delivered sooner than anticipated! It was quite easy to install once you started actually putting it together and measuring everything out. I like that this can easily be removed and installed onto the vehicle.
by: Alan06/15/2019
Everything arrived in a timely fashion and the instructions were simple to follow. The fit is good and look forward to many years of use. Kayaks are awaiting for racks to arrive. Thanks for a great product
by: Phil04/27/2018
2015 Toyota 4Runner
Timely delivery of my order, as usual! Easy to install on my 2015 4Runner. After I had the mounts ready and put on both bars, I installed the front one and fine-tuned it, the second took even less time then. I now have the ability to carry up to 3 kayaks, perfect! etrailer is a great company!
by: Christopher03/15/2022
Very solid roof rack solution but the wind noise is mind-numbing. Ugh.
25
517
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Do Yakima Roof Racks Fit 2023 Acura RDXSo we were able to determine that the 2023 Acura RDX wasn't changed from the 2022 model and we then carried over the fits from the previous year. Sometimes one of the rack manufacturers does this first and since we know they did the correct research we know that other brands will also carry over even if they haven't had a chance to test it like with the Yakima Corebar roof rack part numbers # Y00421 # Y64AR, and # Y49AR that we have listed for your 23' RDX.
view full answer... - Can Yakima Core Bar Roof Rack Crossbars Y00421 Be Cut Down in LengthYakima's Core Bar roof rack crossbars # Y00421 can be cut to a specific length so long as you can make clean square cuts to allow re-installation of the bar end caps. You will probably also need to file the cuts to make them smooth and safe for handling. The Yakima roof racks confirmed to fit your 2018 Toyota RAV4 are shown on the page I linked for you. These racks use bar lengths of 48 or 50-inches.
view full answer... - Cross Bar Options And Kayak Carrier For A 2022 Hyundai SonataWe do have a couple of cross bar options for your 2022 Hyundai Sonata that will work great for you. -First we have the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers for Yakima Crossbars # Y28TR, the fit kit # Y06180 & # Y06153. These are aerodynamic cross bars that measure 50" long, and have a maximum weight capacity of 165lbs. -Next, we have the Yakima CoreBar Crossbars # Y00421, with the same towers # Y00146, and fit kits # Y06153 & # Y06180. These cross bars share...
view full answer... - Inno Fork Mount Bike Rack Compatibility with Yakima Roof Rack Crossbar T-Slot ChannelYes, the Inno Fork Lock Roof Bike Rack - Fork Mount - Channel Mounted - Aluminum # INXA391 has t-bolts that are compatible with Yakima aero bars like the JetStream # Y00426 that have the t-slot channel on top for a clean looking install. If you have the Yakima CoreBar crossbar like # Y00421 then they are not compatible because those aero bars don't have the top channel T-Slot.
view full answer... - Recommendation on a 1 or 2 Kayak Carrier for a 2010 Subaru ForesterIf you looking for a kayak carrier that will work with factory, Aero, round, or square crossbar roof racks, then I recommend the Thule Stacker # TH830. The Stacker carrier can carry 1-2 kayaks at a time. The Stacker includes hardware and tie-down straps to help secure your kayaks to your roof rake and vehicle. It carrier can be mounted on a vehicle with a minimum crossbar spread of 24 inches. I you are looking for a carrier that will carry up to 2 kayaks and can be loaded easier form the...
view full answer... - Recommended Roof Rack Solution for 2016 Ford F-150 That Could Possibly Be Used on Different VehicleAs long as your 2016 Ford F-150 is a Super or Super Crew cab, you can certainly use a Yakima CoreBar roof rack. The rack would consist of these parts: • Yakima 60 inch CoreBar crossbars, part # Y00422 • Yakima BaseLine Towers, part # Y28TR • Yakima BaseClip fit kit, part # Y06122 You could install the crossbars on the 2015 Forester, but you'd need different roof rack towers. You'd want to use the # Y33TR Yakima TimberLine towers. This would allow you to use the crossbars with the roof...
view full answer... - 2010 Outback Roof Rack OptionsAdding feet to your 2010 Subaru Outback Wagon will not change the weight limit of the rack. The maximum weight limit will still be 165lbs. Adding the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 51" Long - Qty 2, part # RRRTS551, does not change that. In fact, adding an extra feet/legs and crossbars to your roof rack will actually lower the weight you can carry on your roof. That is because your roof rack's weight actually counts toward the 165lb weight total. I would use my existing...
view full answer... - Yakima CoreBar Roof Rack System For a 2020 Hyundai Santa Fe SEL Without Factory RailsThe flush mounted rail system must be installed from the factory as there are no aftermarket kits to install them on your 2020 Hyundai Santa Fe SEL. For your Santa Fe I recommend the Yakima Roof Rack System. I have linked a video of this system installed on a similar 2019 Hyundai Santa Fe for you to reference. And you can see that they have the same rubber strips as your Hyundai. You will need the following parts. 2- Yakima CoreBar Crossbars # Y00421 4- BaseLine Towers for Yakima Crossbars...
view full answer...
- Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting PointsFor the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
view full answer... - Solution for Roof Rack for 2017 Chrysler 300I do have a solution, but Inno has discontinued the fit kit for your 2017 Chrysler 300. Unfortunately, other fit kits will not allow you to install this roof rack on your vehicle. What I can offer instead is a Yakima roof rack like the CoreBar rack, which is similar to the # INXB108-115. You will need the following parts to complete the rack: -Yakima CoreBar Crossbars # Y00421 -BaseLine Towers # Y28TR -BaseClip Fit Kit # Y06110 The Yakima JetStream crossbars # Y00425 will work with...
view full answer... - Mounting Yakima Hully Roller and Mako Saddle on 2005 Toyota HighlanderWe have a way for you to mount your Hully Roller and Mako Saddle to your 2005 Toyota Highlander, but you will first need to determine which crossbars you have on your roof rack system. If you have factory crossbars you would use the Universal Mighty Mount # Y03590 to attach the accessories to your crossbars. If you already have the raised factory side rails, but no crossbar system I recommend going with the Yakima Roof Rack # Y00421 and # Y33TR which has the Timberline Towers and 50"...
view full answer... - Roof Rack for 2023 Chevy Bolt EUV for 2 SurfboardsThe Yakima Corebar roof rack part numbers # Y00421, # Y53TR, # Y00245 would be a great roof rack for your 2023 Chevy Bolt EUV to carry two surf boards with a carrier like the Inno Board Locker Surfboard Carrier part # INA744 which can carry up to two boards.
view full answer... - Will the Thule Motion XT Cargo Box Fit on a 2021 Hyundai Santa Fe?Yes, the Thule Motion XT Rooftop Cargo Box # TH629706 will fit your 2021 Hyundai Sante Fe with a crossbar system. The Motion X will fit on top of your vehicle and allow you to access the rear hatch. If you need a roof rack, the parts you need depend on if you have factory flush rails or a naked roof on your vehicle. If you do not already have a roof rack, you will need to purchase one. If your vehicle has flush factory rails, I recommend the following parts: - Rhino-Rack Vortex Aero...
view full answer... - Replacement Adapter and Seat for Yakima CoreBar CrossbarsIt sounds like you have the Yakima CoreBars like the # Y00421 with Skyline towers. We do have the replacement "strap" that allows you to attach the CoreBars to the Skyline towers. That is the Replacement Adapter and Seat for Yakima CoreBar Crossbars # 8880639.
view full answer... - Which Roof Rack System to install Roof Mounted Tent on 2021 Lexus RX 350The highest weight capacity offered by any of our roof rack options for your 2021 Lexus RX 350 is the Yakima Roof Rack System that includes three different parts. You need the Yakima CoreBar Crossbars - Steel - Black - 50" Long # Y00421, the RidgeLine Towers for Yakima Crossbars - Flush Side Rails # Y00145 which will fit the crossbars to your vehicle, and the RidgeClip Fit Kit for Yakima RidgeLine Roof Rack Tower # Y06027 which is the custom fit kit to attach the towers to your vehicle....
view full answer... - Recommended Upgraded Crossbar System for a 2017 Mitsubishi Outlander With a Bare RoofI spoke with Thule and they were able to confirm that there actually are not any corresponding fit kits for the Traverse Feet and your 2017 Mistubishi Outlander with a slick roof. With that being said, your only option is to upgrade your roof rack to a newer system like the Yakima CoreBar Crossbars # Y00421, with the SkyLine Towers for Yakima Crossbars # Y53TR and the Landing Pad 11 for Yakima SkyLine and Control Towers # Y00233. This system will work with your bare roof, has a maximum...
view full answer... - Roof Rack Compatibility On A 2016 Ford Edge With Naked RoofI do have a roof rack option for you, however Thule does not currently make a roof rack system for your 2016 Ford Edge with existing naked roof. In order to attach a roof rack to your vehicle you may want to consider the Yakima CoreBar Crossbars Roof Rack park # Y00421, # Y28TR, # Y06102, and # Y06139. It has an aero style crossbar setup to ensure a quiet ride. I have attached an installation video for you.
view full answer... - Will the SportRack Semi-Custom Roof Rack Fit a 2018 Elantra GT Hatchback Bare Roof?I have a great solution for you. Unfortunately, the SportRack Semi-Custom Roof Rack for Naked Roofs # SR1002 will not fit your 2018 Hyundai Elantra GT. However, for a roof rack system that does fit for your Hyundai Elantra GT, I recommend the following parts: - Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 # Y00421 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06175 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06159 This setup...
view full answer... - Kayak Carrier Recommendation for Hobie Mirage Compass Fishing KayakSince your Hobie Mirage Compass fishing kayak weighs 87 lbs you're either going to have to use a post-style carrier like the Yakima BigStack # Y04041 or use 2 sets of a J-Style carrier like the etrailer J-Style Kayak Carrier # e98878. I recommend going with 2 of the J-Styles simply because it will be easier to load an individual kayak on each one, especially with your heavier kayak. If you don't already have a roof rack then I recommend using a Yakima CoreBar roof rack. The correct parts...
view full answer... - Aero Bar Roof Rack that Fits 2023 Kia Niro PHEVI have a roof rack solution that does fit your 2023 Kia Niro with flush bars but the Malone racks require a raised rail like you mentioned so it would not work. Instead you'd need a rack designed to attach to the flush rails like with the Yakima CoreBar roof rack part numbers # Y00421, # Y64AR, and # Y27AR which is a similar aero shaped crossbar to the Malone.
view full answer... - Recommendation for Carrying Kayaks and Cooler with 2004 Ford EscapeThanks for the photo! There is certainly a better way to carry your kayaks and cooler with the 2004 Ford Escape. To transport the kayaks, a roof rack will work very well for you. I like the Yakima CoreBar Roof Rack, 50 inch Crossbars # Y00421 with TimberLine Towers # Y33TR because of the aerodynamic shape, for decreased wind noise and drag. To carry your 2 kayaks on a roof rack, I recommend using 2 sets of the Rhino-Rack J-Style Kayak Carrier, Folding # S512. These J-style cradles are...
view full answer...
- Roof Rack and Kayak Load Assist Recommendation for 2011 Chevy Equinox with Raised Side RailsThere is a solution for you, but the issue with the BoatLoader EVO the crossbar spread as well as its 80 lb weight capacity, which is less than your 87 lb fishing kayak. Instead, for your 2011 Chevy Equinox with raised side rails I recommend the Rhino-Rack Roof Rack, which will give your Equinox a very functional, durable rack that will allow you to use a load assist. This roof rack uses aero bars and consists of: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - Rhino-Rack SX Series...
view full answer...
- Can Malone SeaWing Kayak Carrier Mount to the Outsides of Roof Rack Feet/TowersYes you can mount the Malone SeaWing Kayak Carrier # MPG107MD to the outside of the towers/feet of your roof rack so that you can use the max amount of bar space available on your 2007 Honda CR-V with the Core Bar roof rack # Y00421, # Y53TR, and # Y00234.
view full answer... - What Do I Need to Mount a Cargo Box on a 2020 Hyundai Palisade?In order to have a cargo box on your 2020 Hyundai Palisade, you will need a roof rack system with crossbars in order for you to mount the box and cargo. Compatible systems depend on whether your vehicle has a bare roof or flush factory side rails. If your vehicle has a bare roof, I recommend the following parts: - Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2 # Y00422 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine...
view full answer... - Which Yakima Landing Pads for 2021 Toyota Highlander to Mount Skyline TowersTo use the Yakima Skyline Towers # Y53TR on your 2021 Toyota Highlander the correct landing pads are the Landing Pad 28 for Skyline and Control Towers # Y66VR.
view full answer... - Roof Rack Recommendation for 2020 Honda PilotThe rack you need will depend on how the roof of your 2020 Pilot is fitted out. I really like the Yakima JetStream roof rack, because of how well they're built and designed. They may not be the least expensive option, but they work very well and are extremely durable which makes them the most popular choice for your vehicle. If you have a bare roof, you'll need the following parts: • Yakima 60 inch JetStream crossbars, part # Y00426 • Yakima BaseLine roof rack towers, part # Y28TR •...
view full answer... - Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
view full answer... - How to Determine if Two Malone SeaWing Kayak Carriers Fit 2019 Subaru Outback Factory Roof RackYour kayaks will fit the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD, but two of them will not fit your 2019 Subaru Outback's factory roof rack because the crossbars simply are not long enough for both the carriers and your 30" wide kayaks. So to use a kayak carrier you'll need an aftermarket roof rack, and the verified fit to replace the roof rack on your 2019 Outback is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00428...
view full answer... - What Roof Rack Can I Use with the Thule Hullavator on My 2022 Toyota Highlander with Flush Rails?I have a great solution for your flush rails on your 2022 Toyota Highlander to use the Hullavator # TH898. Yakima temporarily discontinued the Y00148 because they are updating the feet to fit a wider range of vehicles. Yakima has been changing a lot of fitments lately because of this factor. The landing pads # Y66VR are separate from the Y00148. However, with that being said, Yakima does have a roof rack system that fits your flush rails with a different model of feet. For that system,...
view full answer... - Best Roof Rack for 2020 Kia Soul with Fixed Mounting PointsThe best roof rack for your 2020 Kia Soul with a naked roof (fixed mounting points) is from Yakima because it will give your Kia a roof rack that combines effectiveness and style while minimizing any wind noise that can occur with lesser roof racks. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack will look stellar atop your 2020 Kia...
view full answer... - Yakima Roof Rack for 2022 Subaru LegacyYou are on point with Yakima being a really high-quality product so I completely understand wanting to stick with them for a roof rack on your 2022 Subaru Legacy. The Yakima roof rack that fits your Legacy consists of the following parts: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 for Yakima Towers # Y00248 - Same Key System Lock Cores (Optional) # Y07204 I have added links to video reviews for you to check out as well.
view full answer... - Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
view full answer... - Yakima Roof Rack Parts Needed for a 2017 Subaru Outback WagonYes, the recommended Yakima Landing pad for the 2017 Subaru Outback is the Landing Pad 15 part # Y00241 that you referenced. For crossbars you would want the part # Y00408, for towers part # Y53TR and adapters part # Y03536. All of these components would complete a roof rack for your vehicle.
view full answer... - 2010 Outback Roof Rack OptionsAdding feet to your 2010 Subaru Outback Wagon will not change the weight limit of the rack. The maximum weight limit will still be 165lbs. Adding the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 51" Long - Qty 2, part # RRRTS551, does not change that. In fact, adding an extra feet/legs and crossbars to your roof rack will actually lower the weight you can carry on your roof. That is because your roof rack's weight actually counts toward the 165lb weight total. I would use my existing...
view full answer... - Roof Rack that Can Fit 2023 Jeep Wrangler Rubicon with Sky One Touch RoofThe Yakima Jetstream roof rack part numbers # Y00428, # Y53TR, # Y00226 is a fit for your 2023 Jeep Wrangler Rubicon that has the sky one touch roof and would do a great job to carry a tent and other cargo.
view full answer... - Roof Rack & Attachments For 2010 Toyota Tacoma TRD SR5I would get the Yakima HD Bar Roof Rack System. You'll need the HD bars # Y01156 Skyline Towers # Y53TR HD bar adapter # Y03541 and landing pad # Y74FR. You can then use the JayLow Kayak Carrier # Y04073, Off-Grid Cargo Basket # Y07139 or Skybox Cargo Box # Y95AV. These are just my suggestions for accessories but there is much much more on our website if you're wanting something different!
view full answer... - Will the Rhino-Rack # Y01-130B Fit My 2022 Hyundai Santa Cruz?Yes, you will be able to put 2 bikes on the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount # Y01-130B if the combined weight of the racks and bikes is exactly 220 pounds (or under). As far as the fitment of the # Y01-130B on your 2022 Hyundai Santa Cruz, that is a bit more complicated. The tracks will fit with the included hardware with drilling. With the 63" tracks, you can cut the tracks to the size of the bed rails. The complicated part is the crossbar fitment....
view full answer... - Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof TentThe Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
view full answer... - Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting PointsFor the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
view full answer... - Parts To Use Existing Yakima Aero bars With RetraxONE For Toyota TacomaIt is possible to use your Yakima Aero bars on the RetraxONE part # RTT-60851 for the 2017 Toyota Tacoma. You need 2 sets of landing pads part # Y00221 to slide into the tracks of the Retrax system. You need one set (quantity of 4) of Yakima Skyline Towers part # Y53TR to attach to the landing pads. Then the Aero bars mount to the towers.
view full answer... - Roof Rack Recommendation for Rhino Rack Sunseeker II Awning on 2017 Ram ProMaster CitySince the Sunseeker II Awning Item # RR32105 only fits Rhino-Rack Heavy-Duty, Aero and Sportz crossbars; Thule and Inno square crossbars; Yakima round crossbars we have a solution, but it's not the Rola rack you mentioned. You'd want the Yakima Round Bar Rack part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which would fit and work well on your vehicle and with the Sunseeker. You will also need the adapter part # RR32105 too with the round bars.
view full answer... - How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
view full answer... - Recommended Roof Rack for 2024 Toyota RAV4For an extremely quiet roof rack that fits your 2024 Toyota RAV4 with flush mounted rails I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 -SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR -Landing Pad 23 for Yakima SkyLine and Control Towers # Y98FR The JetStream bars use an asymmetrical design along with WindRidges to reduce drag, noise, and...
view full answer... - Recommend Roof Rack for a Bike and Kayak on a 2018 Honda CR-VIn order to add a roof rack to your 2018 Honda CR-V I recommend using the Yakima Roof Rack made of parts # Y01156, # Y53TR, # Y03541 and # Y00245. This system has heavy duty yet lightweight aluminum cross bars that are durable and rustproof. This option will also be far more cost effective than an OEM roof rack as I am sure you will come to find out. If you need a kayak carrier then I recommend the Rhino-Rack Nautic Roof Kayak Carrier part # RR570. It is side-loading and it comes with...
view full answer... - Length of Yakima Crossbars Needed to Load 2 Thule Hullavators # TH898 on a 2019 Honda PilotWhile we do technically have an option for mounting 2 Hullavators # TH898 onto your 2019 Honda Pilot with the Yakima SkyLine Towers # Y53TR and Landing Pad 19 # Y00245 on your flush rails, you would need at least 72" inches of usable crossbar space for the required 4-8 inches of length past the feet. This is because one Hullavator measures 36" long. The 70" JetStream crossbars # Y00427 does not provide enough length. With that being said, the only Yakima option we carry that has that length...
view full answer... - Can Thule Hullavator Install on Yakima CrossbarsThe Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
view full answer... - Is There A Trailer Hitch For 2023 Kia Soul GT Line With Center ExhaustIf you need to carry cargo with your Kia Soul, I do have a few potential solutions for you. I will tell you there is not a trailer hitch available anywhere that will fit the center exhaust model at this time (August 2023). The receiver would go exactly where the exhaust sits and there is no way to work around that. If your goal was to carry a few bikes we could set you up with a trunk mount bike rack like the Malone hanger # MPG2139. This can carry 3 bikes weighing up to 33 lbs apiece...
view full answer... - Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda PilotThank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
view full answer... - How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
view full answer... - Parts Needed to Carry Spare Wheel on Roof of 2008 Hummer H3If you installed a Yakima roof cargo basket like the # Y07070 you could use the Spare Tire Carrier part # Y07076 to carry the spare on your roof. You would need a roof rack installed on your 2008 Hummer H3 as well like the Yakima round bar roof rack part # Y00408, # Y53TR, # Y03536, and # Y00224. We don't have a good solution to cover where the old spare was installed. If you make it near St. Louis MO we could help out with the install too!
view full answer... - Recommended Roof Rack for a 2012 Land Rover Range Rover SportThe roof rack I recommend for a 2012 Land Rover Range Rover Sport will be dependent on roof configuration. If you have a bare roof then I recommend the Thule WingBar Evo Crossbar System part # TH711520, part # TH710501, and part # TH145116. If you have factory installed tracks then I recommend the Yakima Jetsream Crossbar System part # Y00426, part # Y53TR, and part # Y00224. These are both excellent top-of-the-line options.
view full answer... - Recommended Roof Rack and Mud Flaps for 2007 Hummer H3For your 2007 Hummer H3, I recommend the Yakima JetStream Roof Rack, which consists of parts # Y00425, # Y00148 and # Y00224. This rack features two 50 inch, aerodynamic crossbars with a weight capacity of 165 pounds. They have a lightweight, durable and rustproof aluminum construction that will be perfect for your particular driving conditions. The asymmetrical shape will provide an extremely low profile and quiet system when installed on your Hummer. The SkyLine Towers will attach to...
view full answer... - Roof Rack Recommendation for a 2008 Hummer H3 with Factory TracksFor a roof rack that is confirmed to fit the tracks on your 2008 Hummer H3 you would want the Yakima part numbers # Y00408, # Y53TR, # Y03536, and # Y00224. You can also lock this rack with the lock core set part # Y07204 which would help prevent theft. Sorry to hear about your factory rack getting stolen.
view full answer... - Landing Pads For Rails Of A Carry On Utility Trailer For Yakima Control TowersIf the rails you are referring to on your utility trailer are the track style, then your Yakima Control Towers will fit with Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224. If you will me drilling into metal support rails then you will want the Landing Pad 7 for Yakima Control Towers for Metal Roofs - Qty 2 # Y00227. You may also be interested in the Round 78" CrossBars for Yakima Roof Rack System (QTY 2) # Y00411 or the Round 86" CrossBars for Yakima Roof-Rack System (QTY 2)...
view full answer... - Roof Rack Recommendation for 2009 Hummer H2For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well. We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer.
view full answer... - What is the Difference Between Yakima Landing Pads 1 and 4The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
view full answer... - Recommended Crossbars and Roof Basket for a 2008 Hummer H3 With Factory RailsFor your 2008 Hummer H3, I recommend checking out the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket # Y07080-82. This cargo basket will easily attach to a set of crossbars like the Yakima HD Crossbars # Y01156, measures 74" long x 48" wide x 6-1/2" tall, and has a maximum weight capacity of 130-lbs. To finish the crossbar setup, you'll also need the SkyLine Towers for Yakima Crossbars # Y53TR, HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers #...
view full answer... - Recommended Bike Carrier for Hummer H3The Swagman Pick-Up Truck-Bed-Mounted Bike Carrier is designed for pick up truck beds, so it is not a fit for your Hummer H3. However, I do have several bike carrier options for your Hummer. Our most popular bike rack for the Hummer H3 is the Swagman Original # S64400 4 Bike Rack for 2" Hitches. I have linked to a video review of the bike rack for you to check out. I have also linked you to a FAQ article that shows how to measure the distance between your hitch pin hole and the furthest...
view full answer... - Roof Rack Recommendation for 2005 Chrysler Town and Country VanYour 2005 Chrysler Town and Country van could be equipped with three possible roof configurations (factory tracks, raised side rails or nothing at all). From your description is sounds like you have the factory tracks. For this roof style we have rack options that can be seen on the link provided. A cost-effective basic round bar system is offered from Yakima and consists of parts # Y00408, # Y00224, # Y53TR and # Y03536. Round bars offer excellent compatibility with accessories like bike...
view full answer... - Will Yakima Landing Pad 1 and 4 Fit Rhino-Rack RTC-Style Roof Rack TracksYes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2. To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following: 48" Round Bars - # Y00408 58" Round Bars...
view full answer... - Roof Rack for 2007 Hummer H3 with Roof Rack ChannelsFor your 2007 Hummer H3 with the roof tracks like you pointed out we have the Yakima Skyline roof rack part numbers # Y00425, # Y53TR, and # Y00224 as a confirmed fit. This attaches to the slots you have and gives you a high quality rack that due to it's bar shape will be very aerodynamic.
view full answer... - Roof Rack Fits for 2003 Chevrolet SuburbanThe current Yakima round bar roof rack that fits your 2002 Dodge Grand Caravan consists of parts # Y00408, # Y53TR, # Y03536 and # Y00224. All roof rack fits for the 2003 Suburban are shown on the linked page but no Yakima branded racks are among them. You can select your roof type using the drop-down menu tool at the top of the page to see roof racks that will work on your 2003 Suburban. If you have factory roof tracks then a cost-effective square bar rack confirmed to fit is the Inno...
view full answer... - Parts Needed to Carry the Thule Roof Mounted Cargo Basket # TH859XT on a 2005 Dodge CaravanTo carry the Thule Canyon XT Roof Mounted Cargo Basket # TH859XT on your 2005 Dodge Caravan you will just need a roof rack (if you don't already have one). The Thule basket is compatible with round, square, aero, elliptical, and most factory crossbars. Should you have the factory installed tracks that front to back I recommend the Yakima roof rack which consists of their JetStream Crossbars # Y00425, the SkyLine Towers # Y53TR, and the Landing Pad 4 # Y00224. For a 2005 Caravan that has...
view full answer... - Recommended Yakima Roof Rack for 2007 Land Rover LR3 with Factory Track SystemThe Thule Fit Kit # THKIT3112 is the confirmed fit for your 2007 Land Rover LR3. Since they do not fit in the way you desire, I recommend the Yakima Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224 ( you will need 2 kits), the Skyline towers # Y53TR and the Jetstream Crossbars # Y00425. I also recommend the locks to secure your roof rack # Y07204. This system will mount differently into your factory rails for a confirmed fit.
view full answer... - Parts Needed to Use a Yakima OverHaul HD Ladder Rack and Roof Rack with a Pace Edwards Ultra GrooveI believe that I know what you are wanting to do. You are wanting the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 which fits your Sierra and is compatible with your Pace Edwards Ultra Groove tonneau cover. This provides you with a ladder rack that uses Yakima HD bars. Then you also want to use the HD bars on roof rack towers to provide a lower rack using the t-slots in your Ultra Groove Rails. In that case, the Landing Pad 4 for Yakima SkyLine and...
view full answer... - How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
view full answer...
- Roof Rack Spacing On Roof Of 2006 Dodge Caravan With Sliding DoorsWhen installing the Yakima roof rack on your 2006 Dodge Caravan with the sliding doors, the location of the feet and bars is not something that can be adjusted for each load. They are designed for a specific location so you would need to use other accessories like a roof basket for your specific load to give further support. To order the roof rack custom made for your Caravan, you will need part # Y00425, # Y53TR, and part # Y00224. I have attached a product review video for this roof...
view full answer... - How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
view full answer... - Parts Needed to Carry Spare Wheel on Roof of 2008 Hummer H3If you installed a Yakima roof cargo basket like the # Y07070 you could use the Spare Tire Carrier part # Y07076 to carry the spare on your roof. You would need a roof rack installed on your 2008 Hummer H3 as well like the Yakima round bar roof rack part # Y00408, # Y53TR, # Y03536, and # Y00224. We don't have a good solution to cover where the old spare was installed. If you make it near St. Louis MO we could help out with the install too!
view full answer... - Recommended Roof Rack for a 2012 Land Rover Range Rover SportThe roof rack I recommend for a 2012 Land Rover Range Rover Sport will be dependent on roof configuration. If you have a bare roof then I recommend the Thule WingBar Evo Crossbar System part # TH711520, part # TH710501, and part # TH145116. If you have factory installed tracks then I recommend the Yakima Jetsream Crossbar System part # Y00426, part # Y53TR, and part # Y00224. These are both excellent top-of-the-line options.
view full answer... - Recommended Roof Rack and Mud Flaps for 2007 Hummer H3For your 2007 Hummer H3, I recommend the Yakima JetStream Roof Rack, which consists of parts # Y00425, # Y00148 and # Y00224. This rack features two 50 inch, aerodynamic crossbars with a weight capacity of 165 pounds. They have a lightweight, durable and rustproof aluminum construction that will be perfect for your particular driving conditions. The asymmetrical shape will provide an extremely low profile and quiet system when installed on your Hummer. The SkyLine Towers will attach to...
view full answer... - Roof Rack Recommendation for a 2008 Hummer H3 with Factory TracksFor a roof rack that is confirmed to fit the tracks on your 2008 Hummer H3 you would want the Yakima part numbers # Y00408, # Y53TR, # Y03536, and # Y00224. You can also lock this rack with the lock core set part # Y07204 which would help prevent theft. Sorry to hear about your factory rack getting stolen.
view full answer... - Landing Pads For Rails Of A Carry On Utility Trailer For Yakima Control TowersIf the rails you are referring to on your utility trailer are the track style, then your Yakima Control Towers will fit with Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224. If you will me drilling into metal support rails then you will want the Landing Pad 7 for Yakima Control Towers for Metal Roofs - Qty 2 # Y00227. You may also be interested in the Round 78" CrossBars for Yakima Roof Rack System (QTY 2) # Y00411 or the Round 86" CrossBars for Yakima Roof-Rack System (QTY 2)...
view full answer... - Roof Rack Recommendation for 2009 Hummer H2For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well. We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer.
view full answer... - What is the Difference Between Yakima Landing Pads 1 and 4The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
view full answer... - Recommended Crossbars and Roof Basket for a 2008 Hummer H3 With Factory RailsFor your 2008 Hummer H3, I recommend checking out the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket # Y07080-82. This cargo basket will easily attach to a set of crossbars like the Yakima HD Crossbars # Y01156, measures 74" long x 48" wide x 6-1/2" tall, and has a maximum weight capacity of 130-lbs. To finish the crossbar setup, you'll also need the SkyLine Towers for Yakima Crossbars # Y53TR, HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers #...
view full answer... - Recommended Bike Carrier for Hummer H3The Swagman Pick-Up Truck-Bed-Mounted Bike Carrier is designed for pick up truck beds, so it is not a fit for your Hummer H3. However, I do have several bike carrier options for your Hummer. Our most popular bike rack for the Hummer H3 is the Swagman Original # S64400 4 Bike Rack for 2" Hitches. I have linked to a video review of the bike rack for you to check out. I have also linked you to a FAQ article that shows how to measure the distance between your hitch pin hole and the furthest...
view full answer... - Roof Rack Recommendation for 2005 Chrysler Town and Country VanYour 2005 Chrysler Town and Country van could be equipped with three possible roof configurations (factory tracks, raised side rails or nothing at all). From your description is sounds like you have the factory tracks. For this roof style we have rack options that can be seen on the link provided. A cost-effective basic round bar system is offered from Yakima and consists of parts # Y00408, # Y00224, # Y53TR and # Y03536. Round bars offer excellent compatibility with accessories like bike...
view full answer... - Will Yakima Landing Pad 1 and 4 Fit Rhino-Rack RTC-Style Roof Rack TracksYes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2. To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following: 48" Round Bars - # Y00408 58" Round Bars...
view full answer... - Roof Rack for 2007 Hummer H3 with Roof Rack ChannelsFor your 2007 Hummer H3 with the roof tracks like you pointed out we have the Yakima Skyline roof rack part numbers # Y00425, # Y53TR, and # Y00224 as a confirmed fit. This attaches to the slots you have and gives you a high quality rack that due to it's bar shape will be very aerodynamic.
view full answer... - Roof Rack Fits for 2003 Chevrolet SuburbanThe current Yakima round bar roof rack that fits your 2002 Dodge Grand Caravan consists of parts # Y00408, # Y53TR, # Y03536 and # Y00224. All roof rack fits for the 2003 Suburban are shown on the linked page but no Yakima branded racks are among them. You can select your roof type using the drop-down menu tool at the top of the page to see roof racks that will work on your 2003 Suburban. If you have factory roof tracks then a cost-effective square bar rack confirmed to fit is the Inno...
view full answer... - Parts Needed to Carry the Thule Roof Mounted Cargo Basket # TH859XT on a 2005 Dodge CaravanTo carry the Thule Canyon XT Roof Mounted Cargo Basket # TH859XT on your 2005 Dodge Caravan you will just need a roof rack (if you don't already have one). The Thule basket is compatible with round, square, aero, elliptical, and most factory crossbars. Should you have the factory installed tracks that front to back I recommend the Yakima roof rack which consists of their JetStream Crossbars # Y00425, the SkyLine Towers # Y53TR, and the Landing Pad 4 # Y00224. For a 2005 Caravan that has...
view full answer... - Recommended Yakima Roof Rack for 2007 Land Rover LR3 with Factory Track SystemThe Thule Fit Kit # THKIT3112 is the confirmed fit for your 2007 Land Rover LR3. Since they do not fit in the way you desire, I recommend the Yakima Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224 ( you will need 2 kits), the Skyline towers # Y53TR and the Jetstream Crossbars # Y00425. I also recommend the locks to secure your roof rack # Y07204. This system will mount differently into your factory rails for a confirmed fit.
view full answer... - Parts Needed to Use a Yakima OverHaul HD Ladder Rack and Roof Rack with a Pace Edwards Ultra GrooveI believe that I know what you are wanting to do. You are wanting the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 which fits your Sierra and is compatible with your Pace Edwards Ultra Groove tonneau cover. This provides you with a ladder rack that uses Yakima HD bars. Then you also want to use the HD bars on roof rack towers to provide a lower rack using the t-slots in your Ultra Groove Rails. In that case, the Landing Pad 4 for Yakima SkyLine and...
view full answer... - How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
view full answer... - Roof Rack Spacing On Roof Of 2006 Dodge Caravan With Sliding DoorsWhen installing the Yakima roof rack on your 2006 Dodge Caravan with the sliding doors, the location of the feet and bars is not something that can be adjusted for each load. They are designed for a specific location so you would need to use other accessories like a roof basket for your specific load to give further support. To order the roof rack custom made for your Caravan, you will need part # Y00425, # Y53TR, and part # Y00224. I have attached a product review video for this roof...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.