To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Inno Square Load Bars - Black - 50" Long:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Evangeline: Hi, it's Evangeline from etrailer.com and today we are looking at our Inno Roof Rack system consisting of Inno Aero Crossbars, Inno Through Feet and our Inno Fit Kit for our 2014 Toyota Prius. We have here the Aero crossbars and other than this nice aesthetically pleasing silver stripe here, these are well-designed crossbars. We make sure to have them with the wide part facing the front so that they really reduce the drag and the noise. They're also a bit shorter than maybe your other Aero crossbars, which I like because then they help with fitting other accessories on top of them. The Through Feet come with keys so we can be locked and this help secure your roof rack to your car just to prevent or deter theft. And these are also your little bit low profile feet here on your car.
And from the roof to the top of the bars it is four and a little over a half inches.Since our car has a naked roof, we do use the naked roof fit kit. So what this does is it just clamps onto your car and if you are worried about it protruding out too much, don't worry. If you install it correctly, since it's custom fit to contour against your car, you can even slam the door on it without worrying about it. It has a weight rating of 165 pounds. But when you are, especially when you're putting accessories on it or mounting things onto your roof rack, make sure to account the roof capacity of your car so that you're not overloading it.
So with all that, let's see exactly how we install this roof rack.When installing our roof rack system, well I already installed the rear bar, so we can install the front bars together. The first thing I like to do is get our silver piece here and put it on our crossbars. So we have this upside down. So you bring this in through the bottom and there's this little ledge on there that it clips onto. With this attached you can then pull it in towards the inside.
There's a little button you have to push first to get it all the way through. So that silver plate is at the very end. And from here you can attach the tower. To attach the tower, there are some clips here. And make sure that the screw is centered on top of your plate.
And with it on top of there you can then push it out. And that's in place now. From here you then attach the pad. So this . If you know it's centered . You know it's on right if it sits flush against your tower. Just like that, you just push it in.Then you can attach a hook. And to attach the hook you take out the screw. So just loosen the screw all the way until it comes out. Just like that. You put the hook in there and you screw it back on lightly. So just to make sure it's just tight enough to hold onto your tower. With the towers attached, you can then measure it to make sure it's the correct distance apart. For our front crossbars they have to be 20-1/2" from the center point. So the next thing is there's a center point here. So we just need to measure it from there. And you measure to the line on the towers, right at the middle. So 20-1/2. I just need to bring this forward a little bit right there. That looks pretty good. When you have it measured and out to the correct spot, you can then tighten down both towers. Tighten them down here in the middle.I recommend getting another set of hands just to grab the other end of the bar while you put it up there. Make sure that the tall part of the bar is facing the front. Make sure to follow the measurements in the instructions for your car. So here on our Prius we have it 2" from the door. And when you have it lined up, we can then tighten down the hook. Now this is a torque wrench, so make sure to tighten it down until you hear it click. What I recommend also is to equally tighten both sides. So tighten it down a little bit here, then go on the other side just to make sure that it's spaced even. And the final touch is just to put the caps onto your bars and your towers. So these are nice because they lock. So when you have them in there, you can then lock them in space with the keys.So my final thoughts about this roof rack is, I do like the Inno style. I do like how the bars, the arrow bars, are a bit more aerodynamic or feel a lot more profile than maybe your larger Thule WingBars or your other bars from other brands. So I think it's a good looking roof rack. It has a decent weight capacity. We have some overhang here as well with these size bars. This switch adds a nice look to our whole vehicle. And that was a look at our Inno Roof Rack system with our Inno Aero Crossbars, our Through Feet and our Fit Kit on our 2014 Toyota Prius V.
Average Customer Rating: 4.7 out of 5 stars (399 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.Easy to install and sturdy for the roof basket that was installed as well. Zero problems for the miles driven and the load on top.
This car roof rack cross bars were easy to assembly. Attaching the cross bars to the car takes a little patience to ensure that the cross bars are centered on the car, the correct distance from the center of the front & rear doors and parallel. But going through it once it is easy to repeat. I have sued the carrier once to haul 13 2x4 lumber no problems.
Worked great with my little 2008 civic! Easy to install and relatively quiet. Transported a kayak on a 7 hour trip and they didn’t budge.
The roof racks have been great. I've used them with j-hooks and rear loading slider type pads. They are easy to install/remove. In the picture is my 17ft long sea kayak that stayed secure and safe on a 6 hour journey in high winds using the racks.
Got it for a 2006 Toyota Prius. Overall a great purchase. It was sturdy and never had any major issues. I would 100% recommend getting the locks.
I almost gave it 4 stars for one reason. If you put it on as the instructions tell you to, it whistles really loud. It just takes a bunch of small iterations and quick drives down the street to find out if it stopped making noise. Other than that, great purchase.
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
Great cross bars to replace the rusty original cross bars this vintage Thule rack. Classic cars require these old style racks and many are 30+ years old and great to be able to give new life to an old rack system.
Good quality rack system, easy to assemble and install, works well, looks good, fair price, I'm very satisfied with this purchase. I appreciate the guidance I received from William B. at the beginning of my search for a roof rack to carry a canoe on my 2015 Honda Civic. Two thumbs up for this purchase.
The bars could be longer because you cannot attach two sets of attachments, otherwise they are fine
Really solid bars and end caps, not much more to say!
Easy to install and have worked great so far!
Super easy to install and remove. Lock feature is great
We planned to leave this on for a short time but it's so unintrusive and functional we've had it on the car for a year now. It works great, we've used it to attach a canoe to the car and we now have a rocketbox attached.
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
Works well, has stayed attached with no issues. We've used them (plus the bars) to keep a canoe and a rocket box on the car at different times throughout the year (not at the same time, it's on a tiny golf).
Perfection
Perfect fit.
Well made, sturdy, thick and quality materials. Makes no noise at speed, no complaints thus far.
Worked great! Traveled with a carrier on these racks from Chicago to Seattle. No issues, would buy again!
I have two standup paddle boards that literally live in the racks, and have since day one.
The racks are awesome.
Really great value! No need to spend a lot on Thule. Even those these are square shaped I actually don't hear much road noise. Besides, you're gonna have music playing or riding with the windows down anyway. I would definitely buy these again.
Installed on my 2009 Nissan Armada and it fit. If anyone owns an Armada you know that it takes a special kind of crossrail to fit over the large factory roof rails. This did the trick and was cheaper than the other websites. Arrived in less than a week. I’m happy
It was easy to install. Seems to be very stable.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.